the Encoder error

I am writing some software encoder test and seem to be getting an error + 0.01 degree by degree. He has up to 360. I use a US Digital AD4 - 8 which returns the hex. Even the out-of-the-box vi that accompanies the AD4 gives the same error. I'm puzzled. Encoders do not have parameters. And I was all over the documentation and do not see anything I might be missing. Ideas? Thanks in advance.

Had to tap into some old code to understand it. Buried deeply, deeply in the old code that blows by turning constant is preparing differently in the way that I do. Let's not my way.  My value of the constant has been bad. Had to close through the back door... that is why the strange lag... had to dig deep, deep in the old documents to get the correct value.

Tags: NI Hardware

Similar Questions

  • I get the following errors 2 media loading 1) error: file could not be played & 2) html5: badly encoded video. What should I do to fix this?

    For example, I go to http://jwplayer.com and when I click to see the video I get the following error:
    "Error loading of media: file could not be played.

    Now for the other mistake... I go to a site where the video looks to his will start and it turns white with the error "html5: badly encoded video."

    I went to http://detectmybrowser.com and in the section check the HTML5 video webm and h264 are red (which means that I don't have these plugins that I guess)

    Then... How to fix this?

    Maybe you need this:
    Windows Media Feature Pack for Windows 7 N and Windows 7 KN:

  • Firefox worked before 11 update, now no longer loads pages (content encoding error) or not load at all.

    I just got a new Dell with the 64 bit version of windows 7 Home premium. I downloaded firefox and it worked perfectly fine. Then after that it updated, it does not work. He will take care of some of my favorites, but not completely. Some sites like youtube load very well. Other sites Web support right or not at all. When they load it displays the content encoding error. Whenever I try to look for something with google, search results never appear. None of the fixes worked troubleshooting.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    It does not help if you disable compression of web servers by setting the pref network.http.accept - encoding of an empty string on the topic: config page?

  • Allow the max ERROR 70122 coders

    This message appears whenever I tried to read encoder...

    A little strange because I've used these signals of MAX and vi encoders.

    Since yesterday, when I start my vi, this text box comes out:

    70122 error occurred reading encoder Position.flx

    Motion: The encoder is disabled.  The encoder must be enabled to read.

    (I'm using pci7344 and UMI7774)

    any ideas?

    That tal checho_CR

    Industry produce el error you esta ocurriendo, you can test following pasos para checar esto lo soluciona if:

    1. place activate Encoder.flx on the block diagram of the VI main and double click it to open the front panel.
    2. make sure that the correct card ID is selected and toggle the Boolean value in terms of the encoder to encoder 1FUS sure it is enabled.
    3. run Enable Encoder.flx

    3.1 check if you can read encode in MAX
    4 run read encode Postion.flx check if the error is displayed.

    I hope esto can resolver el problema.

  • Cannot convert word file to PDF file, how to disable the encoding

    Original title: disable encoding

    All of a sudden, when I save a PDF that I printed the word it the code.

    When I try to open, it ask to convert, but do not convert, display only background text.
    This just started yesterday.
    TOTALLY FRUSTRATED
    How this comes automatically change?

    Hello

    1. What is the exact error message?

    2 is this problem only happens with PDF files?

    3. have you made changes on the computer before this problem?

     
    You try to run the system restore. Check out the following link.
    System restore
    Backup and restore
  • Media Encoder: Error compiling Movie - unknown error

    As the title, I have problems with Adobe Premiere Pro CC 2014 Adobe Media Encoder CC 2014 and - "Adobe Media Encoder: error compiling Movie - unknown error" appears each time I try to export my video. Both are trial versions, but my Adobe Media Encoder CC 2014 had ended and my Adobe Premiere Pro CC 2014 have left about 1 week of trial. Please help as soon as possible because I have to do a large project for my school, so cannot function without these great apps. Thank you.

    Hi Charles,

    Have you tried to export with Premiere Pro?

    Go to the file Menu in Premiere Pro > project settings > general and change 'Mercury playback engine' (if it allows) to 'Only software Mode' and then try to export from Premiere Pro.

    Mention also, what operating system are you using, hard RAM (Exxternal or internal), or several installed graphics cards and formats of files used in the project.

    Have you tried to make the scenario first before export?

    If possible send a screenshot of the full timeline.

    Vinay

  • The linker error while packaging iOS app with my DONKEY

    While trying to write a Native Extension for ZXingObjC iOS (https://github.com/TheLevelUp/ZXingObjC), the following error link appears when exporting in Flash Builder 4.x:

    --------

    Error occurred during the application of packaging:

    For architecture armv7 httpd Undefined symbols:

    "___divmodsi4", referenced from:

    + [ZXEncoder numDataBytesAndNumECBytesForBlockID:numDataBytes:numRSBlocks:blockID:numDataBytesInBlock: numECBytesInBlock:error:] in libcom.google.zxing.ZXingNativeExtension.a (ZXEncoder.o)

    + [Encode ZXAztecEncoder: len:minECCPercent:] in libcom.google.zxing.ZXingNativeExtension.a (ZXAztecEncoder.o)

    + [ZXAztecEncoder generateCheckWords:totalSymbolBits:wordSize:] in libcom.google.zxing.ZXingNativeExtension.a (ZXAztecEncoder.o)

    LD: symbol not found armv7 architecture

    Compilation failed during execution: ld64

    --------

    This happens in Flash Builder 4.6 or 4.7 using AIR SDK 3.7

    This isn't my first Native Extension for iOS. No amount of fiddling around with the addition of frameworks or libraries in Xcode for static library.

    Looking for advice on what must then try to resolve this linker error...

    I'll let the foregoing for SEO to the further research about this error, but by adding the following fixed my error Undefined Symbol

    ...

    5.0 is probably fine, another random Googling showed that by default to 4.0 which is probably a source of the issue.  Also of note, I don't have to add a linkerOption for one of the 3rd libraries part that uses the side of XCode.

  • I need to change the encoding whenever I start Firefox it doesn't remember my choice. Why?

    Encoding is Western, and I need it to be Unicode. I change, but everytime I open e-mail once again the encoding back to the West. How can I keep Unicode permanently?

    Sounds that the server sends the page with the incorrect coding because if the server sends a coding then that wins and you use the menu "Firefox > Web Developer" or on XP possibly "View > character encoding" in the bar menu is visible to change the encoding to Unicode.

    If you have the Firefox menu orange button, you can set the pref browser.menu.showCharacterEncoding true on the topic: config page for easy access.

    I don't know if there are still extensions to set the encoding of this work properly in the current versions of Firefox, but you can take a look at the site of modules.

  • 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

    6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

    Repair Apple Software Update since the programs & features Panel configuration and then try again.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Difficulty the following error code: ssl_error_illegal_parameter_alert

    After upgrading to FF26, I get sites like Yahoo and Facebook that does not open correctly. Passwords for yahoo mail won't initially. I have to recycle the time pages 2 and 3 before they will not work correctly. I sometimes get the "year error occurred during a connection to www.facebook.com.» Even SSL rejected a unacceptable content handshake message. (Error code: ssl_error_illegal_parameter_alert) ».

    I tried to do the recommended fixes posted on the site by deleting the cache and history, however, the problem still exists. In addition, I completely wiped off FF of the computer and reinstalled and nothing has changed. I have Kaspersky Pure 2.0 as my antivirus, but this problem occurs on one of my three computers.

    I have this problem without any security software additional beside microsoft one (as described in the bugzilla entry).

    I don't see in the creation of new matter. Bugzilla entry clearly described the problem, sees which side Server (apache), too many shows. There are some developers that includes SSL to examine it.

    Creating another question will not really help. It is not a question of invalid use. Also if you use google for this error, you will find that tons of people have this problem in various conditions (and no solution, only solutions relying on play with TLS inner firefox settings)

  • Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

    I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

    Tried to check and repair disk permissions. This finished.

    Then tried to empty the trash again and got the same error 50 yet.

    I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

    I can't go in safe mode or in disk utility.

    Any suggestions on what to try?

    Thank you

    What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

  • photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

    photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

    If you want any help here, you'll have to tell us what the error message.

    Which report you errors to?

  • Since the change of Tiscali to TalkTalk if I click on links in the emails read on webmail, I get the following error message and then I get disconnected from your

    Since the change of Tiscali to TalkTalk if I click on links in the emails read on webmail, I get the following error message and then I disconnected from TalkTalk webmail.

    HTTP status 404 - /cp/templates/applications/mail/html/null.jsp type status report

    message /cp/templates/applications/mail/html/null.jsp

    Description the requested resource (/ cp/templates/applications/mail/html/null.jsp) is not available. Apache Tomcat/5.5.27

    can you help
    

    Please contact the webmaster. The webmaster will then contact us if they need our help. Thank you!

  • Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

    Hello!
    The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
    Sincerely, Vsevolod.

    This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    See also:

  • The following error has been made a while ago, but don't know how to find out if a solution has been found?

    Microsoft VBScript runtime error '800a01a8' object required /include/SiteSecurity.asp

    This is for the next Web security. It's the only one that shows this error and I have a dozen of bookmarks. I contacted the company and they have any problems to an end and my link is: http://www.nextwebsecurity.com/Contact.asp.

    I tried to use the Opera browser and am still getting the same error.

    Can it be fixed and why it doesn't work no more (stopped working in early December, 2012) and I used to volunteer for this site.

    What is the error, and what you do to get the error? I need more details

Maybe you are looking for

  • HP Pavilion dv7 button walk / stop does not

    Hi, I recently had my Hp Pavilion dv7-1245dx Entertainment Notebook (to the best of my knowledge bc, I can't look it up in my product number) fixed some viruses and malware that caused random stops and freezes. My laptop worked fine after that the fi

  • I saw the blue screen of death...

    I'm having a little difficulty with actually ordering for my Compaq Presario CQ5210F desktop PC HP recovery discs. Thanks in advance for your time!

  • Search in excel on network

    I am trying to find a way to look up a value in an excel spreadsheet on a network drive and several tabs with different names within the worksheet. Example: I am looking for 200041 "Test C" tab and make the #2 and #4 parameters. It is located on the

  • How can I burn an ISO 9660 format disc in windows 7 >

    I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Wi

  • The integrated weblogic server startup problem: Domian by default; 12 c

    I installed Jdev12c and created autonomous area. But more later deleted the installation program and do a Setup again. This time the server does not work. She stopped. I tried to install it twice. The reason for this failure, I noticed, is that SOA E