The endangered network devices / system 58 with Net View error - something "randomly" seems to have occurred to my network 2-3 days ago

Similar Questions

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• The HP imaging device not found... Error 8 [(1, 0,-2147024770)]

  -New installation of Windows 7 64 bit with all the updates of Windows installed.

  -HP OfficeJet Pro L7500 connected via ethernet / DHCP.

  -I get the following error message after you install the full version of the software:

  The HP imaging device not found...  Error 8 [(1, 0,-2147024770)]

  -Two other computers on the network, they get the error and can scan

  Troubleshooting steps already taken:

  1. uninstalled and reinstalled the latest version full

  2 carried out allong uninstall_L3 and uninstall_L4 with a reboot and reinstall about 4 times.

  3 sanning via 'Paint' works very well.

  4. the 'Windows Image Acquisition' service is started.

  5 Windows firewall is turned off.

  6. print jobs.

  7 watch Jet Pro L7500 Office properly in the device under "Imaging devices" Manager

  Nice try, but this isn't an answer very nonsense similar to most of the HP answers I've seen on the forums.

  -J' already have the l3 uninstall and reboot, as already indicated in my original post.

  -L' computer already has the latest version of Flash - over this software has nothing to do with communicating with the scanner.

  -The software is already downloaded from HP.

  However, I have repaired and it is perhaps what made him.  I'm not positive:

  -J' ran 'bpd_scan_Carrier.msi' which is in the folder "setup\bpd_scan" by right-clicking and choosing "update".

  -J' also ran "BPDSoftware.msi" which is in the folder "setup\bpdsoftware" by right-clicking and choosing "update", but I don't think that it did.

  -J' have also installed the Photosmart program but I don't think that that had nothing do with it.  When you run HP diagnostics program, it is said that what needs to be installed for scannig work.

  Thanks HP for all the major recommendations, I read in aid groups...    It is sarcasim in case your wondering you.

• I wish that the tabs colorful. is it possible with Firefox? And or each new topic have a different color tab.

  I wish that the tabs colorful. is it possible with Firefox? And or each new topic have a different color tab.

  The ColorfulTabs extension can be useful for you.

• The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?

  The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?  Both units are of the same type and speed.  both are records hard internal seagate w double disc in the drives

  On Thu, 20 Sep 2012 14:41:30 + 0000, Stephen_403 wrote:

  The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?  Both units are of the same type and speed.  both are records hard internal seagate w double disc in the drives

  No, at least not by us.

  Open a hard drive for some reason any at all can be done in special
  laboratory as parameters. Something else will destroy the disk.

  There are companies trying to recover data from broken disks,
  and they are sometimes successful. And who knows, maybe they
  sometimes use methods such as what you describe.

  But if you plan to use such a company, know what they
  are all very expensive. It does not for most people.

  For the future, if you have files you want to be sure are not
  lost, make sure to have in place a backup procedure on a regular basis the
  external media player.

  Ken Blake, Microsoft MVP

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more

  My daughter's office got fried during the last storm, even though she had a surge protector.  Obviously the power company line was bad.  The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more.  When she tries to run a system restore it gets "extended attributes are incompatible."..: thank you for your help.  Debbie

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the scan tool (SFC) System File Checker and check if it helps.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.Microsoft.com/kb/929833

  Method 2:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Try the steps in the following Microsoft article and check if it helps.

  Problems installing and uninstalling programs on Windows computers:

  http://support.Microsoft.com/kb/2438651

  Hope the helps of information. Please post back and we do know.

• I have this window 10 installed about 5 days ago & now I can't find the Accessories folder, can anyone please help on this...?

  I have this window 10 installed about 5 days ago & now I can't find the Accessories folder, can anyone please help on this...?

  Can you be more specific?

  If you mean windows Accessories > win key > all apps (see shears) > windows accessories

  

• Can I ask what's happened on the Oracle Forms forum, after reading it for 20-odd years it seems to have disappeared?

  Can I ask what's happened on the Oracle Forms forum, after reading it for 20-odd years it seems to have disappeared?

  I just get a message saying that the makers of the element do not exist, it can havbe been deleted when you try to access the page to:

  https://community.Oracle.com/community/Developer/English/development_tools/application_development_in_pl_sql/forms_2

  TIA

  Ady

  Ady,

  Apparently the people who helped create this software was last updated forum decided to restructure the many places as well as simply a change of software...

  ... but could not be bothered to document changes, they went to the URL for the new locations.

  FORMS are always, like REPORTS.

  They were buried at the following locations tree:

  All locations > Database > Oracle + Options database > SQL and PL/SQL > PL/SQL application development

• The list of devices/paths HBA with Powercli

  Hi guys,.

  I would like to know if is there a way to get the list of devices a vmHBA given with PowerCli HBA.

  

  Of course, try this.

  Get-VMHost | %{
       $esxImpl = $_
       $esx = Get-View $esxImpl
       $esxImpl | Get-VMHostHba | %{
            $hba = $_
            Get-ScsiLun -Hba $hba | %{
                 $lun = $_
                 $row = "" | Select Host,HBA,Device
                 $row.Host = $esxImpl.Name
                 $row.HBA = $hba.Name
                 $row.Device = ($esx.Config.StorageDevice.ScsiLun | where{$_.Key -eq $lun.Key} ).DisplayName
                 $row
            }
       }
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• "The product key does not work with this edition of Windows 7", but I have not changed anything

  Suddenly this week 7 Windows has stopped working and the error message said I might have a non-genuine copy, etc.   I checked the product key by using the Start/computer/properties menu. The product key was not the same as on my PC, so I tried to get the right version. Then I got the error message that you have entered the product key will not work with this edition of Windows 7, and I want to run Windows 7 set up or enter a professional product key.

  I saw that someone else had been advised to run MGADiag.exe so I've already did but am puzzled by the report.  And I'm worried, why me nice Acer desktop PC suddenly did that, when he had worked happily with normal updates etc.  The report shows a different product to the label of my PC key.

  Can someone help, please

  Thank you

  Andrea

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - FCTV3 - P9RTC-F9C3D
  The Windows Product Key hash: G7PayGi + xFabXK4wlLkFbNDozpA =
  Windows product ID: 00371-619-5427791-85058
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {AC5B74A9-0098-41DC-ACF4-BD8449D66609} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140706 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: allowed
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AC5B74A9-0098-41DC-ACF4-BD8449D66609}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-F9C3D00371-619-5427791-850585S-1-5-21-1356999665-2362789505-4127209914AcerAspire X 3812FRIENDP01-A020090816000000.000000 + 0007A043C07018400F808090409GMT Standard Time(GMT+00:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-619-542779-01-2057-7601.0000-2042014
  Installation ID: 007595347832785135952380495674625140911753099524272431
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: F9C3D
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 3
  Trust time: 02/11/2014-18:36:20

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 11:1:2014 20:45
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: LAAAAAEAAQABAAIAAAABAAAAAQABAAEA6GEkRoSxVFESavzCioZogPYoTFg =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1457 APIC 081609
  FACP 081609 FACP1457
  HPET OEMHPET 081609
  MCFG 081609 OEMMCFG
  SLIC ACRSYS ACRPRDCT
  081609 OEMB1457 LASRYVITRAGE
  GSCI 081609 GMCHSCI
  AWMI 081609 OEMB1457
  SSDT DpgPmm CpuPm

  Moved from programs for Windows 7 Forum.

  Code of Validation caching online: 0xc004c4a2

  Your product key is blocked. suggest you try to activate by phone, they may be able to help you enter the product key on your sticker or say why it is blocked.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• Click on the computer then go to downloads, I can't scroll down, as seems to have shortened

  When I click on computer, then go to downloads that I can't scroll down as seems to have shortened what should I do to make the longer bar so I can scroll through the entire length of the screen

  Hello

  ·          When did you start to notice this problem?

  ·          The problem happens only when you browse downloads folder?

  ·          What is the version of the operating system running on your computer?

  ·          The window is maximized?

  Please provide more information to help you.

• System Restore indicates an unspecified error has provisioned & you files have not been changed?

  When I try to use the system restore, I get this error as follows... (an unspecified error has provisioned & you files have not changed) I get this same error even using different activation & restore points. I don't know how you can even get an UNSPECIFIED error, seems to me if a mistake has provisioned & he knows it's a mistake he would know what is the error. In my opinion, this error message no sense at all... I'd be happy to hear this error message explained or all thoughts. Thanks for any help...

  Kind regards

  Dale

  Hello

  happy to help

  Norton is the main problem

  Thanks for the reply

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "