the entry point producer d3dperf_setmarker is not found in the library d3d9.dll dynamics.
All my games do not work
When I double click on fifa 09, he said that the producer entry point not found d3dperf_setmarker in the library d3d9.dll dynamics.
can someone tell me how to solve this problem
Hello
Please check if you are able to play this game in a spare user account
-Cleanboot Windows to isolate 3rd party interference
-Check if there is an update/patch for the game
-System Restore to a date and time when the game worked successfully
-Open the control panel and try to repair the application
Uninstall/reinstall the game
I hope that this information is beneficial.
Thank you
Aaron
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Tags: Windows
Similar Questions
-
Original title: Windows XP Home error message
I reformatted the hard drive and restorded factory settings. I've upgraded to Service Pack 3 and IE 8. I now receive the errors listed below and the computer does not turn off. I have to hold in the power button to make it stop.
Errors:
The procedure entry Point aspSearchInterfuce could not
Be found in the library of links dynamic wlanapi.dll
The apsInitialze procedure entry Point could not be
located in the library of links dynamic wlanapi.dll
can someone please tell me what are these errors and how to fix?
Hi Daytona931,
Hope you were able to resolve the issue and thank you for sharing the information.
-
When I reboot, or start my system I get an error - smaxpnp.exe - not found entry point
Hello
Have you made changes on the computer before this problem?
Smax4pnp.exe is a system process that belongs to the software SoundMAX. It is not necessary for sound to work on your computer, but is mainly used to run or adding components to the software SoundMAX program.
I would suggest trying the following methods and check if it helps.
Method 1:
Step 1:
Start safe mode and check if the problem persists there.
A description of the start in Windows XP Mode options:
http://support.Microsoft.com/kb/315222
Step 2:
Put the computer in a clean boot state, then start in normal mode and check if it helps.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.
Method 2:
Try to remove the smax4pnp.exe of your computer and check if it helps.
Follow the steps to remove smax4pnp.exe:
a. Press 'Ctrl', 'Alt' and 'Delete' on your computer to open the Windows Task Manager. "Click on the"Processes"tab on top.
b. scroll down and click on "Smax4pnp.exe." Click 'End process' to stop the currently running process
c. click on the Windows "Start" button, then click 'Search'. Click on "Search all files and folders" on the left panel to open the search box.
d find and delete this file: Smax4pnp.exe.
e. empty the trash to complete uninstallation.
Hope the information is useful.
-
---------------------------
Wzcsldr2.exe - Entry Point not found
---------------------------
The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
---------------------------
Ok
---------------------------Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time. It might even be possible to solve a problem in a single response when enough information is provided.
Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.
Provide information on your system, the better you can:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
The afflicted system has a working CD/DVD (internal or external) drive?
You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
Do you see that you think not you should see and when you see it?
If the system works, what do you think might have changed since the last time it did not work properly?
Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.
Fact that sound familiar and you have something like this installed?
If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it. You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.
They also have an active Support Forum where you can post your problem/question to see if people there can help you get there. There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.
I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly? Did you update or reinstall your device from D-Link or drivers, lately?
-
original title: procedure entry point SetD | DirectoryW
is not found in the KERNEL32.dll dynamic link library
Hello mxlpick,
When you receive this error message? How long have you encountered this message? Here is a link that I hope will help solve this problem. Please let us know status.
Microsoft KB:
http://support.Microsoft.com/kb/142606
Thank you
-
I'm having a problem playing a game "fifa" 2010 on my pc. When I opened the fifa10 shortcut on my desktop, it shows a dialog box saying "entry procedure that point D3DPERF_SetMarker is not found in the library of links Dynamics file d3d9.dll. What should I do?
I use Windows Xp service pack 2.Mohd Monis,
First thing I would say is to get your current PC with Windows updates. Service Pack 3 was released in April 08. If you did not or limited updates updates since then, you should get your system up to date. If you are not invited to any DirectX updates then you can go to this link and download the latest DirectX 9 for your system. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw in shlwapi.dll. How can I fix the problem.
You have all your current updates?
Go to windows updates and see if there are updates that you do not have installed.
The error message seems to indicate that your copy of XP has not been updated.Updated and let us know if you still receive the error message.
Thank you
Marilyn
-
Running Windows 7 Home premium
Hi I get this error when I try to add or remove windows features. Before I even tried to change anything, I get this error when I try to access point to add or remove windows features. I just reinstall windows then perhaps it's to do with it?
ERROR
The procedure entry point ucrtbase.terminate could not be found in the api-ms-win-crt-runtime-l1-1-0.dll dynamic link library
If anyone knows what this means or what I have to do to get rid of the error, any help would be accepted with gratitude.
Best regards Steve
Hi, I have now discovered what the problem was. It wasn't Office exactly. Rather have just reinstalled windows 7, windows update did not work properly. Virtually no updates had been installed. I had to run the "windows update diagnostic" program from Microsoft support. Once that had solved the problem of update on 180 updates have been installed. Once they have been installed the problem with the error has been resolved. I do not know what update fixed but one of them did.
Best regards Steve
-
REPLICAT ERROR(The procedure entry point long jmp could not be located)
Hello
I get the following error
The procedure entry point long jmp could not be located in the dynamic link library orauts.dll
Anyone know anything about this? Help, please.
Thank you
VProbably because the user of the OS doesn't have the correct configuration for GoldenGate. At least a member of the group, access to the XDK libraries. Lot of things way, bad ORACLE_HOME, like that.
-
MpHeapReAlloc could not be found in the library ODBC32.dll Hotlinks
MpHeapReAlloc could not be found in the library ODBC32.dll Hotlinks
Hi jimmymichael,
(1) what is you receive the exact error message?
(2) when exactly you get this error message?
Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
If this problem occurs when you try to install all programs, and then try Method 2
Method 2: Clean boot the computer and then try to install the program
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
What is this error not found: C:\Windows\System32\nvHotkey.dll
Any help would be greatly appreciated... after logging on my sons computer, that's the first thing that pop up. What is this error: not found: C:\Windows\System32\nvHotkey.dll
Any help would be greatly appreciated... after logging on my sons computer, that's the first thing that pop up. What is this error: not found: C:\Windows\System32\nvHotkey.dll
"It is a valid program, but it's yours if you want it to run at startup".
http://www.bleepingcomputer.com/startups/nvhotkey.dll-26830.htmlHow to disable to give messages nagging like that?
(1) if there is everything about the .dll u you described here, to the start system tray turn off...
http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/or
try to use "Autoruns for Windows" and check if there is that a boot associated .dll u entry you have described and if so delete...
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902or
You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
then navigate to these paths...[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
then look for the .dill file you have described here and delete this key... RESET
-
I had a Trojan horse and had to do a reinstall of windows XP Pro is now trying to install my printer but I get the error message saying "entry point procedure GetMessage DLL is not found in the cscom dynamiclink library dll. Help, please!
Hello
I suggest you to refer to this link and check if it helps:
http://support.Microsoft.com/kb/308028
It will be useful.
-
PROCEDURE ENTRY POINT SET THE 'W' DLL DIRECTORY COULD NOT BE LOCATED IN DYNAMIC LINK LIBRARY KERNEL32. DLL. MESSAGE APPEARS...
PROCEDURE ENTRY POINT SET THE 'W' DLL DIRECTORY COULD NOT BE LOCATED IN DYNAMIC LINK LIBRARY KERNEL32. DLL. THIS MESSAGE APPEARS.Hello
1. when exactly you receive this error message?
2 did you a recent software or hardware changes to the system?
3. are you able to start the system in normal mode?
Method 1:
If this a recent issue, then you try to perform a restore of the system to a prior restore point you have been affected by the issue.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates, that you have installed are removed.
To run the system restore, you can consult the following link:
How to restore Windows XP to a previous state
Method 2:
You can also scan SFC on the computer that would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.
a. Click Start, click Run, type cmdand then click OK.
b. in the sfc/scannow command line type, then press on enter
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-
UIR-file not found (error 94) when executing dll CVI in TestStand
I am trying to execute a dll that I created in CVI in TestStand. I did have problems so far running all features except for the function that calls my user interface. Whenever I run it, I get an "error 94, file '... 'not found' IUR.»» This particular IUR is usually called in the main() function when I create an exe file in CVI, but I'm the appellant for another function to perform in TestStand. Any suggestions on how to fix this?
Hello
You use the correct LoadPanel call. You must use LoadPanelEx().
Concerning
Ray Farmer
-
Not found dynamic link library
Dynamic linking library d he's not found?
fix y comment
Hello
Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
http://support.Microsoft.com/common/international.aspx
Thank you
Maybe you are looking for
-
Is it dangerous if I charge my iphone 5s all night?
Is it dangerous if I charge my iphone 5s all night?
-
Repair without resetting the screen?
Hello I have a DroidX and my screen has been cracked recently when she fell on a tiled floor. I called Motorola and they screen repair but the technician I spoke with informed me that they would have to reset the phone to do this, which would affect
-
How do I completely disable the automatic encryption of files on XP
I have Windows XP SP3 and I download all of the files are automatically encrypted any directory I save the download in. It is not that simple that disabling the encryption of any specific directory, the file will be downloaded as encrypted regardless
-
Move the Windows Backup system image and backup to a new hard disc
Hi all I got a new external hard drive because my old external hard drive was not large enough to hold all my backups. Now, I would like to move the backup from the old hard drive to the new hard drive. It is really easy to start from scratch on th
-
Is it possible to know the service provider of the user to use in my blackberry application.
Hi all I have a requirement in my applocation to know the user's service provider (such as Airtel, idea, DOCOMO,... etc.). Is it possible to get the service provider of the user in the blackberry app. Please help me with this... Thank you & best rega