the error I have is included in the CBS, windir/logs/CBS/.log

Similar Questions

• I get the error: you have exceeded the number of USB devices supported

  I get the error: you have exceeded the number of supported USB devices. I read that a single USB can access up to 127 devices and I just plug in 20 (would do more). I use a hub 4 ports that is powered and port hubs of 2 to 10 who is also powered so I don't think it's a question of power. Operating system is Win7. Thanks in advance for the help.

  They stop at Z

• Problem steps Recorder error - you have not permissions to system files needed to create the specified output file.

  I am trying to use the PSR as a domain user, but get the following error message when you try to save my record:

  "You don't have permissions of system files needed to create the specified output file.
  If I run the present when logged in as a domain administrator, I can record without problem.  But when logged in as a domain user, I get the error.  I tried "Run as Administrator" as well as "Run as different user", enter the domain administrator credentials, but still get the error.
  Everyone knows about this problem?

  Hello Giblits,

  Because the computer is connected to a domain, it would be better on the TechNet forum. I suggest you post your question on the following link to get the exact resolution.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Error already have the maximum number of partitions, impossible to reclaim the unallocated disk space

  Original title: recovery disk unallocated space - please help

  I bought a lenovo z370 and it came with a partition of a disk c with 653 GB NTFS and d lenovo 30 GB drive and two other drives without names like d or e simply unamed with 200 MB of space and another with 14 GB of space... now to partition C drive more far I used the shrink option and shrunk 200 GB which now shows as unallocated space and when I try to create a new volume on it it says I already have the maximum number of partitions... What do I do now? How to restore this 200 GB of unallocated in my c drive space or do in another player... Please please help

  And see if I've followed the process this last link of how to re-partition my drive is what I did in the first place and because I got 4 partitions as I detailed it in the other answer, I have written that if I reduce my c drive, it becomes unallocated space, and even with the new volume Wizard does not become a player since I get an error message have already 4 partitions...

• When you use Adobe Acrobat Pro DC, how do I convert my PDF to Excel and have it include the header and footer from the original PDF? I can't get it on down to the Excel worksheet.

  When you use Adobe Acrobat Pro DC, how do I convert my PDF to Excel and have it include the header and footer from the original PDF? I can convert all information of an organization but the footer and header with no discharge in the excel worksheet.

  Hi trudyb54940538,

  Converting PDF file to sheet Excel spread, header & foot is not included.  I am able to reproduce the problem at my end.

  Thanks for reporting the issue.

  Kind regards
  Nicos

• Setup error: you have read-only access to the inventory of oracle

  Hi guys,.
  
  In some versions of Linux, for example. Fedora, Ubuntu... every time I install the Hyperion product, I get this error "you have read-only access to the oracle inventory." and also the interesting thing, if this error comes Oracle does not settle "OpenLDAP' which is required to run shared services.
  
  With Oracle Enterprise Linux, and everything seems fine. and I did not get the above error also OpenLDAP is installed.
  
  any help would be appreciated. attached is the screenshot of the error.
  
  [https://docs.google.com/leaf?id=0BwB5xiYJ_HGwMDZkNjQ1OTEtMDg4Zi00NGM3LTk5NDAtYzE1ZmJkZTcyMzU0 & hl = en]
  
  Thank you

  Supported versions of linux, with you have found problems.
  I thought it was just Oracle Enterprise 4/5 and Red Hat Enterprise 4/5 that are supported.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I have can´t of the cbs.log file

  Hello world

  It seems that never ends, now it s the file cbs.log that says access denied.

  OK, after you have installed successfully (and finally) sp1 of vista, I ran once more the chkdsk and sfc/verifyonly to verify if everything was ok, as if it was before I ve installed sp1, which was: no no violation of the integrity of the errors found, files damaged, everything seemed just fine for me, but now After installing sp1, the sfc/verifyonly said that Windows found violations of integrity resources Protection and the details are in the cbs.log file, which I was able to access so far, but now, when I try to open it, it says "access denied" - what happened between that made the system go like that and can it be resolved?

  Anyway, desperate, I tried a sfc/scanow in the hope that it would solve this problem, this 'thing', well actually he pointed out that the Protection of Windows resources found and managed to repair damaged files and details could be found at c:\windows\logs\cbs\cbs.log, but as I said before when I try to open this file it says access denied.

  So I rebooted my pc and hope that everything would be ok, given that the sfc/scannow said that the files when repaired, so I thought. Unfortunately, that s not the way it is, after the reboot, I ran sfc/verifyonly, just to confirm that everything was actually ok, well it still signals once Windows Resource Protection found violations of integrity and the details can be found in the cbs.log file.

  Right now my computer seems to work very well, besides that of course, the problem is I m feling completely lost here with this 'thing', it just doesn't feel good and probably it's just me, maybe I m too picky about this stuff, everything must be running ok so I can be at rest with myself, please can someone help me with this , can someone explain me what is happenning, so I can understand it?

  I think that worst of all, at least for me, is not to know what is happening, it s as I have, I would even say obcessive, need to understand not only the solution but most of all the cause of it, the mechanism of it s, I need to understand the process, don't´t you all?

  Pleeaase helps.

  Well be Pedro Borba

  Pedro Borba,
  You must copy the CBS and paste it on your desktop or Documents folder.  Then, open the copied version of the file.  Here is an article which also gives instructions on reading and research the CBS log file.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

  I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

  Please help, thanks
  

  Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

  If you see a startup Neosmart repair disk download here, this is NOT what you want.

  You want a good Vista DVD that contains the operating system files.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you need a recovery media for your laptop back to factory settings, read this info:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• where are the location server log and the dimension to generate the error file located?

  I am running a build script and I got this error. Can someone tell me the location of the files below? (The server log and Dimnension generate error file)
  
  Construction of Dimension ERROR - 1007083 - failed. Error code [1090004]. Check the ser
  file log of worm and the dimension generate file for possible more info...
  
  Thank you

  I guess you are on Version 11 as your last post was on this version.

  You are customer of the EAS, take a look at \Hyperion\products\Essbase\eas\client
  If you load using maxl you should have a file of errors defined in the script.
  Newspaper to take a look at \hyperion\logs\essbase there will be essbase.log and application logs are lower than for example \hyperion\logs\essbase\app\Sample\Sample.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• Cannot access the CBS. Error: Access is denied.

  Original title: cannot access the CBS.

  found errors, I can't access the CBS.log file after that sfc/scannow and I tried the commands listed by Microsoft to take ownership of the file but still access denied message. Also I can not get the command that isolates these errors in a text to work file format either - "access denied" message or it takes back me to C:\Windows\System32 > command prompt.

  Hello
   
   
  Try this:
  a. Click Start and type cmd in the search box.
  b. right click on cmd in the above results, and then click Run as administrator.
  c. at the command prompt, type notepad c:\windows\logs\cbs\cbs.log and then press ENTER.
  The article below describes how to analyse the generating log files by the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista. Note: The article is also applicable to Windows 7.
  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I found the error of => niincludes.h (18) : fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I checked a few path, "C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2005\VCNET\Include.
  I found a lot of files, but only does not NiVisaComponent.h, anyone know how to download or is this file has changed the name?

  I already install the driver NI-VISA v15.0 but still does not have this file.

  I have not "C:\Program NIUninstaller Instruments\MeasurementStudioVS2005\VCNET\Include" because my laptop is 64-bit.

  Hello

  If you see the file Readme VISA 15, you'll see that Visual Studio 2005 is not supported. It seems that the most recent version of VISA that supports VS 2005 is Version 5.2 for c# / VB.NET and 5.0.2 for MFC C++ (with Measurement Studio 2009).