The Ethernet port integrated on a support of Office P7-1423w Wake on Lan?

Similar Questions

• Dynadock U3.0 - cannot use the Ethernet port after update 8.1 Win

  Hello world

  I use a u3.0 dock Dynadock with my Vaio PCS 13.
  I'm not able to use the Ethernet port on the Dynadock since I updated my Windows 8.1 device update 1.
  Before that everything worked well.

  I'm not able to re-install the drivers correctly (tried 7.6m0, 7.5m2). While the game driver tries to start, I get an error message, Setup is not able to put a bunch of registry (SYSTEM\CurrentControlSet\Services\DisplayLinkGA\D evice1) keys (up to 0). (Image 1)

  If I ignore these messages and do not install the driver, the Ethernet port will not installed in Device Manager. (Image 2)

  If I try to install the driver manually (DisplayLink network adapter NCM), I'll get an error message that a driver has been found but that access has been denied. (Image 3)
  I started the safe mode and could install the driver. But if I reboot in normal mode, the machine could not be started.

  I also tried to disable UAC and I am logged on as administrator 'real '.

  Please find the attached messaged (in German) error:

  [picture 1]: http://picload.org/image/lcalwop/toshiba.png
  [Picture 2]: http://picload.org/image/lcalwoc/toshiba2.png
  [Picture 3]: http://picload.org/image/lcalwlg/toshiba3.png

  BTW: If I unzip the Installer (7.6m0) and install * inf for the good Fri & dev (4503) it still does not work...

  I put t know what to do anymore...

  Hello

  After upgrade to 8.1 Windows, you should also update the software/driver Display Link
  This is very important!

  The latest version of the driver can be downloaded here:
  http://www.DisplayLink.com/support/downloads.php

  Note: the old version must be removed!

• How to extend the network and using the Ethernet port to connect an older computer without wifi capability

  I have a wireless network with my Time Capsule, but also I have an old computer without wifi capability. Is it possible to share the connection to this computer that connects an airport express (model A1264) to extend it and the computer thought that the ethernet port on the Airport express?

  Thank you.

  Yes

• The bridge network to the ethernet ports

  I have an Airport Extreme base station for my wireless at home. The problem I have is that the base station is not near a few features, that I need to hard wire. I read that you can set up a network bridge and if I understand correctly, this concept, it's like setting up of another wireless device, but this second device provides you with the required Ethernet ports for connectivity. Is it possible to do with the Airport Express secondary device?

  Most of the other posts that I read said to extend the wireless range, but the range of my base station is not the issue. I just need a couple on the way ports. I've heard this can slow down the entire network however. Is this feasible? All known reserves? Advice is appreciated.

  Is it possible to do with the Airport Express secondary device?

  Yes

  Most of the other posts that I read said to extend the wireless range, but the range of my base station is not the issue. I just need a couple on the way ports. I've heard this can slow down the entire network but

  It all depends on if you configure the AirPort Express to "extend" the network... which will lower the maximum speed potential of the network by all 40-50%...or...whether that you set up the base AirPort Express for simply to 'join' the network... which causes a decrease in the speed of the network... but it will provide 2-port Ethernet for wired devices.

  If you need more than 2 ports Ethernet on the Express, you can add an Ethernet 5 port, 8-port switch, etc., to create as many ports as you need.

  Don't know what kind of speed you need for the Ethernet ports, but they are limited to 100 Mbps, then that would be the maximum speed available ports Ethernet on the Express.

• Use the ethernet port to connect a pc

  Hello

  I intend to use my raspberry pi to do some projects, but is not close to the router (needs thought Ethernet connection - and before anyone asks I'm not able to use a wifi dongle to connect because of the requirements of the project size wise), but near my officejet 6700, can I use the Ethernet port on the printer to connect my raspberry pi to the network from that the printer is connected. I have to play with settings?

  Can anyone help

  Thanks in advance

  Martin

  No you can not use the Ethernet port on the printer.  It is only to connect the printer to a wired network.

• Mac Pro does not recognize the Ethernet ports

  After a reboot for my end of 2013 Mac Pro OS x 10.11.3, the two Ethernet ports are most recognized. Suffice to say not 'connected' is one of them.

  I have:

  • rebooted a couple of times
  • Reset the PRAM
  • the power disconnected for several minutes left
  • tried two different terminals
  • tried two different Ethernet cables
  • tried the two Ethernet ports

  The light of the end device will blink.

  WiFi works fine.

  What should I do before I decide that there is a hardware problem?

  Bob

  There was a recent post about the same problem and found a solution. Give it a try: Re-built-in ethernet disappeared.

• Send and receive data via the Ethernet Port?

  Hello

  I am trying to acquire details of LAN/Ethernet from the PC through LabVIEW.Like details, we get the date & time, etc Serial Port system, is it possible to get the details of my PC via LabVIEW.My LAN aims to sebd and Receive via Ethernet Port command.

  The last time I did it, I used the range of tcp. (I go ctrl + space for quick menu then type tcp). Open a connection to the network device, and then use tcp read/write, depending on the case. There are examples that can be very useful

• HP Pavilion # 21 - h014: how to enable the ethernet port

  I can not connect to my modem by ethernet cable. How can I activate this port? HP pavilion model #21 - h014

  At the back of the PC ethernet port must be enabled at any time, unless the Device Manager shows that there is a problem.  The ethernet cable is maybe defective.  OR  Just to the right diagnosis, what is the brand and model of the modem and port on which you connect to the modem and then to PC.

• Cryptographic cards are allowed on the Ethernet ports

  I want to set up encryption between E0 on RouterA and E0 on RouterB. Is this possible?

  RouterA and RouterB are related through the ports series (T1) or dial-up connections (ISDN, POTS) and are never on the same ethernet connection.

  Intermediate links between RouterA and RouterB change regularly and frequently in my portable environment.

  When I apply a cryptographic card to an ethernet port, it seems to crash the router, part of the traffic goes thru, but I lose telnet.

  I use 2520 s and 4500's

  Any ideas?

  Thank you

  Mark Matthias CCNA, CNA, CNE, MCP

  The card encryption should be applied to the port outgoing (port facing the other peer router). You apply the encryption card to T1 and ISDN/POTS interfaces and define your ACL crypto to encrypt traffic between subnets ethernet.

• Can workstation make me use the ethernet port on the remote computer?

  Ideal solution would be:

  I have specialized software on my computer I want to use without installing it on the remote computer.

  For now, I have to because the software uses the ethernet computer port to do a job, the software is used to.
  

  
  

  (1) is there a solution out there for everything just to connect to a remote computer and make use of its ethernet port remotely?
  

  
  

  Someone told me that VMWare Workstation last night. Maybe it's completely off-base.

  
  

  If this remote computer is connected to another computer via an Ethernet cable, but not for the internet, only data.

  For me to be able to connect to it, the remote computer must maintain a simultaneous Wifi connection as well.
  

  I use Teamviewer to fight against it.

  
  

  (2) if 1) above is not possible, I'm back to my current setup which is to the software me, I need on that remote computer. But my problem is that it does not seem possible to have WiFi and Ethernet connections at the same time.

  Please correct me / explain how if I'm wrong.

  How can be useful to me in these scenarios Workstation?

  Thanks in advance for your help. I'm looking everywhere for more than a week.

  I read that you wrote in your OP several times and no offense not expected however it is not well presented and I find I have to ask the many requests for clarification, however, I will say this...  A Virtual Machine is presented only a wired Ethernet adapter no matter how the host connects to the LAN/WAN and if you need to wired Ethernet and WiFi Ethernet in the Virtual Machine, and then in addition to the default wired Ethernet you can also provide your own card Ethernet Wi - Fi USB to connect to the virtual machine as well as the two available to the virtual machine at the same time.

  Others while I won't waste time asking a bunch of questions and if you want to take an another stab as describing in explicit and specific in detail what you have and are trying to accomplish, then I add more to the discussion.

• Using the Ethernet Port on a remote Express

  I have just moved into a new House and has Verizon FiOS installed.  Verizon provided a router modem combination like my main wireless service.

  I have an IP phone that I need to use in my office located in another room and the Verizon tech said that it would be very expensive to run a separate line in this room.

  I have a generation current Airport Express.  I would like to use the Express to join/expand the wireless network in the office, but my question is, the LAN on the Express port will be active so that I can connect the IP phone to the LAN port and use the phone via wireless Express?

  If possible, can you give us some guidance on how to configure the Express?

  Thank you

  David

  I would use the Express to join the network wireless Office

  The AirPort Express, expected to be able to 'join' the wireless network that is provided by the modem/FIOS router, assuming that the device uses wireless standard... parameters and... He Express is located where it can receive a strong signal of the FIOS router/modem wireless.

  But, the Express can not "extend" or "repetition" of the FIOS wireless network, given that "expand" function requires the Express receive a wireless signal from another Apple wireless router.

  .. .my question is, the LAN on the Express port will be active so that I can connect the IP phone to the LAN port and use the phone via wireless Express?

  Yes.  In fact, you can use the LAN or WAN port, or both at the same time... because both ports behave as LAN ports when the AirPort Express "joins" a wireless network.

  can you give us some guidance on how to configure the Express?

  What camera... Mac, PC, iPhone / iPad... will you use for this?  What operating system is that it uses?

• I can't do all the USB ports work - Evesham Style II Mini Office in Windows XP

  I'm looking for the chipset & drivers for my grandaughters computer, AFAIK is drawn next to a reading Speccy.

  O/S

  Windows XP Pro 32-Bit

  CENTRAL PROCESSING UNIT

  Intel Pentium 4 2.80 GHz

  Motherboard

  Manufacturer - Eveshamvale.

  Vend. ATI chipset.

  Chipset model - ID5833.

  Model Southbridge - SB200

  The downloaded manual provides the following information

  Model = P4SBA

  = North Bridge chipset; SiS 651 - South Bridge SiS 962

  CPU = Supports Socket 478 - Supports 400/533 MHz FSB

  I'd appreciate any help possible, that someone can give me as well as the Office works currently can't do all the USB ports work, they worked until I had to change the hard disk, but do not have the installation diskettes or the drivers.

  Hi Graham,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, the USB ports don't work on Windows 7 computer.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  Method 1

  Run this fix - it and check if it helps.

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Method 2

  Reinstall the USB controllers.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  I suggest you to contact the computer manufacturer and download the latest chipset drivers and check if it helps.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Unable to connect to the broadband router by wireless or cable ethernet hub is active as my xbox living works through it will need to activate the ethernet port and wireless function bt someway

  may need to download drivers

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  They will help you with your question in the Vista Networking Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a printer HP (part of the package with the computer) which will connect via the USB port is no longer in my office. He has worked previously so, any ideas on how I can get it to work again?

  While I do not know there have been changes to the system (updates and so on), I don't know what modifications have been made or that one; If any, may be the cause of the problem. Compound that with, I can't get back far enough to get to the last time that I used this printer with this computer and it is a puzzle all around.

  Let me know what additional information as appropriate, you need, maybe the way to collect (if it is not something that I already know how to do) and we'll see if we can get these papers start college again.
  System: HP p6604y Windows 7 Home Premium 64-bit
  Processor: AMD Athlon II X 2 220 processor 2.80 GHz
  6,00 GB (5.75 GB usable) memory
  The printer is HP Deskjet 3000 J310.

  Hi Michael,

  1. What is the error you get all trying to connect to the printer?

  2. the printer works properly when connected to another computer?

  3 is. the computer able to recognize any other usb device?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Method 2.

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  Additional information.

  Find and install printer drivers in Windows 7: http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers

  Install a printer: http://windows.microsoft.com/en-us/windows7/install-a-printer

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• Using the second ethernet port to connect to the printer?

  Hi I have a Mac Pro 2.1 old school and I'm wondering if I can connect to the network with an ethernet port and connect the latter to a printer?

  If so, how?

  Yosemite running.

  Thank you

  Physically, you use a port and a cable to connect to your network and use the second port and a second cable to connect directly to the printer. The printer must obviously have an interface Ethernet himself.

  However, you need to configure the second port on the Mac and the Ethernet port on the printer for each manually configured the TCP/IP addresses and these should be in a range of different network to your main network.

  If you the main network is something like 192.168.1.1 then your printer and the port on the Mac connection to this need to be in another network, such as 192.168.11.1.

  In theory, if the printer supports Hello aka. mDNS, then maybe you can get away with not having to configure TCP/IP addresses for the connection.

  The main reasons to use a second separate connection as this would be the performance or security, and frankly I don't think that's really relevant here. This would mean that no other computers on your network will be able to access the printer.