The Explorer will not work after you install Office Jet 4500

Similar Questions

• Internet Explorer does not work after you install the kb2761451 update

  Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open.  So I deleted it and Explorer opens.  This update is listed as important.  What should I do?

  The Explorer is 9.

  Hello

  Thanks for posting the question in the Microsoft Community!

  Internet Explorer stops working after the update kb2761451 is installed.

  The problem may occur if the updated components are corrupted.

  I suggest you follow the steps mentioned below:

  Method 1: Of reset Windows Update components

   

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: run the Update of the system analysis tool

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Windows Vista's Aero theme will not work after you install a major update and reboot into Windows Automatic Update, can I fix?

  Update: Windows x 64?

  After I did a reboot the theme changed to Standard or Windows Classic theme.
  When I try to change the theme back there is no preview on the window and when I try to apply the theme, there's just the same thing.

  Hello

  also try to go to your site in manufacturere graphics or computer cards and find the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  You may also like to change how you receive updates for do you download this update problem still through automatic updates

  for any update you don't want to, make a right click on it and hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need or who have limited access to internet

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Re: Portege R500: controller button does not work after you install the update

  After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

  I guess there is something to configure in the section "Optimizing" Toshiba Assist.
  When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
  I have no idea where to find this executable.

  Can someone help me?

  Why you n t use the OS restore option?
  The operating system supports the option of system restore and this helps to put the system in the previous point.

  Check, maybe it helps to get the old version of the Toshiba Package Value added.

• Google chrome will not work after you disconnect it or shut down the computer

  After you download it again, it works fine until I disconnect again. Any idea what is the problem?

  The Feedback forum is not his place for something else questons or comments on the Microsoft Answers site.  I moved your post on the forum of "Programs" of Windows.  You must always mention your version of Windows when you post.

  Answers forums are on Microsoft products.  Ask questions of Chrome in Chrome forums that Google runs.  http://productforums.Google.com/Forum/

• Preview pane of the Explorer crashes then work after you close the error message.

  Whenever I have use the preview pane in Windows Explorer to view the contents of, say, a file .reg, doc .txt or .ini file, it crashes with "Preview Handler replacement host has stopped working". I click on the option 'Close program', which is followed by an Application error: "Exception EAccessViolation in module ShellEh428.dll" etc. I which closes as well. Then the preview pane works without having to close and reopen the Explorer window. In fact, if I close and reopen, it happens all over again.

  It's not that big a disadvantage because the window of the Explorer himself plant actually, but it would be nice to know why this is happening and if it can be prevented.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• HP Envy M6 Simplepass finger reader will not work after you uninstall Norton internet security.

  I've seen a few problems to do with the drive of finger and Norton internet security, but I couldn't find a solution to the problem. I looked on biometric devices and it says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
  
  I've been on the re HP Recovery section - install drivers and applications and reinstalled the HP Simplepass program, but I do not uninstall before that I did and that's maybe why it did not work.
  
  What to do to make the finger drive working again?
  
  Kind regards
  
  Maddie

  Ok. So I got a new laptop that has a fingerprint sensor. I opened the Recovery Manager and see that there are TWO pieces of software that need to be installed/reinstalled.
  (1) the validity of the pilot sensor of fingerprint in the drivers section.
  (2) the SimplePass software in the software section.
  
  Most of the drivers and software in the Recovery Manager do not need to be uninstalled first - the installation package should do this automatically.
  
  If you have not already done so, install the driver of validity using Recovery Manager and restart your computer.

• Everyone knows the drivers of the device will not work after calling Camera.getCamera () so many times?

  Using Flash Player on Windows machines, since the Flash Player 11.4 version - Flash Player 15 (ActiveX version) and every version after that we had a problem in which Hauppauge PCIe and Videology cameras or other non-standard devices it does not work with Flash Player after calling getCamera() so many times. For example, we get the camera and publish a netstream for 10 minutes, then we have the camera set to null. Later, we call the camera again and after doing this 25 times or 100 times, the camera driver just seems to fail, and Flash Player is as is the streaming of the camera, but the NetStream info indicates zero-byte data video aired by indicating that there is no pixel coming from the camera.

  Someone else knows this problem to where you need to restart the browser or the Windows for Flash Player process power getCamera() properly again?

  Yes, it seems that others have experienced a similar problem. Adobe has not yet confirmed that it is a bug, but it is followed here:

  Bug #3850401 - handle with video.attachCamera leak leading to the unusable device

• USB does not work after you install the utility on Satellite A200 Intel chipsets

  Hello.
  I installed Win XP Pro SP2 on my Satellite A200-1SM and everything was ok until I installed Intel Chipset Software Installation Utility version 8.2.0.1014 (recent ones on the site of download of Toshiba; before this step all USB dev. worked properly), after all my USB devices wouldn't work. I had my windows up-to-date with updates from Microsoft, but that has not changed a thing.

  I use Vista once again, but still want to work one day at the XP operating system.

  Please help me if you can.

  Like the previous user said, the chipset must be installed as first pilot
  In addition, it seems that this laptop supports the Intel® GM965 + ICH8M Intel chip.
  It would be advisable to check the version of the Intel page directly

  Hey Buddy

• Outlook 2003 does not work after you install the update Outlook 2007 (KB2412171) _

  I run Windows 7 and Outlook 2003 but the update automatic KB2412171 causes Outlook to crash into the opening with the message "Microsoft Outlook has stopped working" and the program must close so I'm not able to use Outlook at all.

  Please can someone help me with this.

  In these forums, you will find some support for Outlook (2003): http://social.answers.microsoft.com/Forums/en-US/category/officeoutlook ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Sound does not work after you install the update of the IDT High Definition CODEC on DV6 series laptop driver

  Hi, I have edition entertainment laptop HP Pavilion dv6 Windows 7 64 bit OS. I'm used to unsuccessfully drivers every month and everything is fine, but 3 days ago I downloaded the new IDT High Definition Audio CODEC drivers. After installing his system stops working. I tried several times to back the drivers and install them again, but in both his case has not appeared. What should I do?

  Hello

  Uninstall the driver, and then install the codec Microsoft UAA before reinstalling the previous audio driver.

  Please post your results here in your thread.

  Best regards

  ERICO

• Office Jet 7612: Scan of the computer does not work after you win 10 improvement

  One of my clients has an officejet 7612 and has improved to win 10 to win 8 and lost the "Scan to PC" features themselves the printer he used for years to create his PDF files.

  Print and scan drivers seem to work to scan and print from the computer to the printer, but the printer software that was authorized to create PDF and JPEG of the scanner and send them to the computer doesn't seem to work.

  Is there any solution for this?

  Y at - it another way easy to make PDF files or is this feature lost with the upgrade?

  Shane Valcich

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/6879040#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer

  To scan from printer to computer, you need to install the printing software full of features first.
  Once you have installed the software,

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3. make sure that 'enable' the Scan of the computer. Also check the tab "Automatically start Scan of the computer when I connect Windows" is to check if you want to have this feature permanently. (an example is shown below)

  

  

  Hope that helps.

• Help of blackBerry Smartphones that my curve will not work after I installed an update

  I recently installed an update for my curve. Since then it keeps loading then a white screen saying "error, press any key to return to the configuration of pre" then it turn off then repeats the process again. " I need help because phone is important to my work. Thanks for any help.

  I tried keeping on the battery for 5 minutes.

  Hi scrack

  So if it's during a software device, you can try a fresh reload of your device software to exclude any corrupt device OS. Have a look at how to perform a clean reload of the smart phone BlackBerry using BlackBerry desktop software.

  KB11320

  All you need a PC with Internet connection and USB cable.

  Try it and tell us.

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• P6-2009it: the computer does not start after you install a new videocard (msi Gtx 960)

  Intel Core i3-2120 Socket H2 (LGA1155)

  Foxconn Intel H61 2ABF (Cougar Point)

  P6-2009it

  Power supply - corsair CX500

  Do not run the single image windows start and all. I can't go anywhere, WHAT BIOS is not also responsible.

  Right now is the radeon hd 6950 2 GB video card.

  BIOS updated to the latest version 7.16 - has not helped

  remove the previous video card driver - has not helped

  I leave the battery on the mother 10 minutes card - has not helped

  Nothing helps, what's the problem?

  Hirurgrrr, welcome to the forum.

  The problem you are experiencing is caused by the fact that the GTX 960 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  The last series of video cards that does not need UEFI is the GT 640.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.