The F65 firmware update does not start

Similar Questions

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• my creative cloud is not getting updated. the update does not start yet. There has been 0% for the last 24 hours now

  my creative cloud is not getting updated. the update does not start yet. It was 0% for the last 24 hours

  Hello

  Please follow the steps below and check it, if it helps:

  1 - click wheel settings in the upper right of the cloud creative app > Preferences > sign out

  2 force quit Adobe all activity monitor processes / end of task for Adobe on the process from the Task Manager (e.g. cc, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  3-

  MAC: Right-click on the icon in the Finder and select the 'Go - To' folder option. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol") ~/Library (It will open the folder of the user's library.)

  Then go to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  WINDOWS: C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE times

  4-

  MAC:  Go to the Apple icon > System Preferences > privacy and security > firewall > TURN OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  Go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be in ANY

  WINDOWS: see, turn the firewall on or off - Windows Windows help

  5 make sure there is no other Internet active safety program - if it is then go ahead and launch CC app and login and check

  Let us know if that helps.

  Kind regards

  Bani

• my computer has the power, but it does not start.

  my computer has the power, but it does not start. crancking for several minutes, after that it will quickly be able to record and then it starts again. Also, he asked once to restore to an earlier date that I did. He worked for a night, but come back to the same thing. Help!

  Hi moozer_890

  
  1 during how long have you had this problem?
  2. have you updated display drivers installed on the computer?

   

  Method 1 :
  To resolve the problem, you can see if the uninstall and reinstall then the display driver-
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Method 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site, then check.

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• My HARD drive is detected by the BIOS, but it does not start

  I have a laptop, OS is Window7, the HARD drive is detected by the BIOS, but it does not start, I formatted and the procedure going well until the reboot, it starts not to finish formatting.
  Please, I need help!
  Thanks in advance

  Hello

  Sounds like the hard drive has failed, or other hardware issues affecting the reader by the mother-
  Board or wiring.

  Check with Lenovo support, online documentation and diagnostics and ask questions about known issues in their
  forums.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ---------------------

  The manufacturer Diagnostic utilities - use them to check the disk.

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en

  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Satellite L300 - 20 d - after updating the BIOS, that it does not start now

  Hello

  I bought my wife a Toshiba L300 - 20 d (PSLB8E-0CK00YEN). It came with loaded Vista, which it cannot do.

  My grandson offered also to sort. He has installed a new hard drive, loaded with XP and managed to get almost all the drivers working except the WiFi.

  After spending many hours, he decided to update the bios of v1.8 to v1.9. Since it does not start... It happens with the Toshba screen, start windows normally, then it attempts to load windows, flashing and start the cycle al.

  He has tried default settings, tried a XP disk, setting on the disk, nothing. He just does the same thing in safe mode.

  Any suggestions will be appreciated

  Concerning

  Keith

  Hello

  The wireless network card is enabled with the hardware switch on the computer laptop and FN + F8? Check this box!

  Additionally, make sure that the latest driver on the Toshiba site is installed, and check the settings of the wireless network adapter TCP/IP.

  Moreover a description that is more accurate than the WiFi works not would be very appreciated.

  Good bye

• crashed during the update does not start now

  my computer laptop gateway arrested during an update (not sure which). It does not start, I get a file missing or corrupt ntoskrnl.exe error. My repair disc does not work either, I read in the forum vista repair disks are not recognized if you instaledl a service pack. So if this is the case where should I go from here. I would be most grateful for any help. jpshan

  It seems that the update has affected your daughters to start.

  ·        Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (you may need an Installation of Vista disc to do that)

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  ·        Bootrec /RebuildBcd

  If this does not work, then withdraws EasyBCD http://neosmart.net/dl.php?id=1 and run this process and see that helps.

  If not, then please repost your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where update problems specialists will be happy to assist with the problems you have encountered. Be sure to include the names and numbers KB ALL updates that have been installed before this problem started.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After the new HARD drive does not start installation Qosmio G15

  I just got this G15 last week and one of the hard drives was bad. Put it in a new Bay 2 and it does not start. I took it back and it starts fine. I even changed the main hard drive Bay 2 HD and it starts up fine with a hard drive. It's something to do with the scores, I think. Any help appreciated.

  Hello
  I think that the boot order has been the bad HARD drive in the BIOS.
  At the new disk you do not installed any OS, and in my opinion, this is a reason for starting problems.
  Simply access the BIOS and change the boot order

• NEED to recover files from the xp computer that does not start.

  I changed startup on an old xp computer programs and now it does not start (I can accidentally put driver not run at startup). blue screen; STOP: 0x0000007B (0xF8992528, 0xC0000034, 0x00000000, 0x00000000) xp sp3 no safe mode without recovery does Center no disc. I just bought a computer to try to recover the information with win 7 but can not slave the drive to him because it is ide and the new computer is too modern. I need to save files are important on the xp computer is it possible to save them?

  I met this BSOD error several times, and the following fix usually (not always) allows the hard disk to be read by the system...

  -Boot your system and access the BIOS Setup
  -It will vary with different systems, but try to press "F2", "F10" or "delete".
  -If you need help with this step, let me know the model of the system, and I'll see what I can come up with
  -In the configuration of the BIOS, looking something like "Device Boot Configuration"
  -Go to the hard disk configuration and change the current option
  -Here are the most common options that I can think of:
  -SATA IDE, AHCI, (newer systems have more options, such as IRRT)
  -If the current option is "SATA", change it to "AHCI" or "IDE".
  -If the current option is 'DCIS', change it to "IDE", etc...

  It's just a quick run through a possible fix, without knowing the details of your system!  If you need more detailed help, I would like to know the details of the system, and we'll see what we can do!

  -Riley

• The Windows Audio Service does not start

  I have no sound at all. Show my audio device is installed and working. I get a message that the Windows audio service and audio end point service Windows (I think (does not start.)

  Hi JamesSimpson11759,

  ·         What happens when you try to start the Windows Audio Service? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest you to run the Microsoft Fixit and check if the problem still persists.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  You can also view the article mentioned for more information:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Let us know the results.

• Print screen button (with or without the key Fn is) does not start the process?

  Print screen (with or without Fn key) key does not start any process?

  The PrintScreen key is misnamed.  It copies the screen to the Clipboard, so you can paste the image into Paint or other graphics application.

  It has nothing to do with printing [and did not over fifteen years].

  See this thread for some additional useful information - How to use Print Screen on Win7 & where will the image

• I just installed a SSHD and cloned my old SATA HDD through him. My CC 2015 apps work okay but the creative cloud app does not start. The circle of rotation right guard go. What should I do?

  I just installed a SSHD and cloned my old SATA HDD through him. My CC 2015 (Photoshop and Lightroom) apps work okay but creative application cloud does not start. The circle of rotation right guard go. What should I do?

  Sorry to have troubled you. I rebooted and everything works now.

• CS LR6 of CS LR5 update does not start

  Hi, I have just install CS LR6 by buying the upgrade. Everything seems fine with the process (from download to install), but LR6 does not start when I click on it.

  I've only had this open window: '

  

  Translated, that means, there is a problem with my setup (I don't think while I used LR fair, 5 five minutes ago no problem) and that I should try to uninstall and reinstall... I can't uninstall uninstall link is too broken.

  Any help would be welcome.

  Stone

  OK got it working, but I had to delete all the files Adobe virtually any Mac application, kept only some newspapers (I thought it can't hurt and I'm tired of this mess) and then do a clean installation/configuration in this order:

  -Install the creative cloud with the CreativeCloudInstaller.dmg downloaded from Adobe

  -Disconnect of the CC of the preferences panel and leave CC (after a while of waiting for the "Exit" option to be available on the menu, don't know why).

  -Install Ligthroom 6 LS11 my purchase of upgrade .dmg Installer and download.

  -Launch LR and follow this way to serialized: using Adobe Photoshop Lightroom | Serialize Lightroom trial to activate like Lightroom 6 CC

  Now, I have to install PS CS6 back and all my plugins and settings.

  If you need to do to, be sure to have backups secure (several).

  This solution is really the only one that worked for me, because I think I've tried almost everything I see here (reconnection of the CC, restart, reinstall, delete files, give rights to libraries and so on).

  For the moment, everything is fine (I have no time to seek more internal LR6 bugs) and I got the standalone version works even without connection internet (I tried).