Similar Questions

• Measurement tool Pro Acrobat stopped defining the end points, someone else has / sovle this problem?

  Measurement tool Pro XI of Acrobat stopped fine tuning points while I was working on plans today.

  I've used Acrobat for years and this has never happened before. When the use of line, perimeter-line or a region, it fixed endpoint when left or quickly double clicked on, but while I was working on a set of plans this afternoon, he stopped allowing me to the final point. If I double click quickly, my line of area or measure disappears, forcing me to reset my original point again, but never allowing me to complete the measure.

  Its crazy.

  Nothing seemed to happen to change the default behavior of the application.

  I'm on PC Windows 8.1, 8 GB of RAM, Intel i5 - 3210M

  1. I saved my files open and restarted Acrobat: no change in the behavior of the app
  2. I opened an existing plan of pdf that were previously measured and attempted to measure: no change in the behavior of the app
  3. I restarted Windows: still no change in the behavior of Acrobat

  Just the question.

  I disabled apparently brand tool when setting up my plan measure ration with the drop down.

  Its amazing that I have never done this in the past.

  I went into the preferences of measure 2D and concluded that the increase was unchecked, BOOM, as simple as that.

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite C665D - the second time the same problem HARD drive.

  I have a laptop C665D. Eight months after I buy, I had hard drive problem (reallocated sector count-> value about 2000!).
  So I send to the service and got with the new hard drive.

  And now, after 7 months, but I have the same problem, (down hard drive).

  My question is why this happens two times, this same defect?
  Anyone had this same problem?
  Is a problem with this series of laptops?
  Can I do something to avoid damage to the next (third) disc?

  Thanks for any help.

  > So my question is why this happens two times, this same defect?

  Any HARD drive is going to die sooner or later, the HARD drive is not reusable part.
  Read and write data to the HARD disk would cause the head moving in many cases, the disk dies because of the head crash.
  Moving the laptop while the disk is in use would affect the functionality of the HARD drive.

  On my laptop I have a utility called installed HARD disk protection tool.
  HDD Protection detects the vibrations, shocks and similar signs in the PC and the disk head moves automatically to a safe position to reduce the risk of damage that might be caused by the contact of the head-to-disk.

  Advise to use such tool too

  By the way: HARD drive problems have nothing to do with the series of laptop

• Can transfer easily to be run more than once on the receiving system?

  Can transfer easily to be run more than once on the receiving system?

  I installed Win 7 on a separate XP drive and I am able to switch between them starting from their respective readers.

  I made an easy transfer between them and now intend to install it and test my programs on Win 7.  Once I've got everything working properly, and that all migration issues are resolved, I would like to make a clean second run Easy Transfer of XP just before the final switch to Win 7.

  "Clean run" I mean I want all the Win 7 system to be completely replaced by the new data and the parameters of the XP system.

  Easy transfer will do that?

  What I would recommend that you do, is create a new account user in Windows 7, then restore the backup Windows Easy Transfer in the new account and delete the old account that you created in the first place.

• I have DC Acrobat and run it on Windows 7.  I have a Brother printer.  I downloaded the new drivers last night, but the same problem occurs: when I try to print, I get a message in a dialog box, "the cocument could is allowed.  When I click on

  I have DC Acrobat and run it on Windows 7.  I have a Brother printer.  I downloaded the new drivers last night, but the same problem occurs: when I try to print, I get a message in a dialog box, "the cocument could is allowed.  When I click on out of the box with this message, I get a different dialog box including the message says "it has not chosen to print pages".  Any suggestion would be appreciated.

  The way I got it to print has been:

  Without opening the program, in the list of applications, move on to Adobe Reader and right click, select Properties.

  Go to the compatibility and click 'run as Admin '.  Reopen the application and all prints for me now.

  (This can only work with your personal computer if?)

• When I open a PDF file, I get the following message "invalid plugin detected Adobe Acrobat reader DC will leave" I reinstalled Adobe DC but still the same problem, it happens with all PDFs. Any advice much appreciated.

  When I open a PDF file, I get the following message "invalid plugin detected Adobe Acrobat reader DC will leave" I reinstalled Adobe DC but still the same problem, it happens with all PDFs. Any advice much appreciated.

  Hi Stephen39,

  Do you have any 3rd party plugin installed for Adobe Reader? If not, close all instances of Adobe Reader running and delete the entire folder to: C:\program Adobe [version] \Reader\plug_ins.

  Now go to control panel > programs and features. Locate the entry for Adobe Reader X and choose to repair the installation.

  If you do not have a 3rd party plugin installed, try to uninstall them and see if the problem is related to the same. If it works, let me know what plugins have been the origin of the problem so that I can have a look.

  If all goes well, this should fix things.

  Thank you

  Nicos

• >: everyone is having the same problem with all the days that I have now with the update on thursda after update, it could not be started "could not find xpcom" restored Dáil

  with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
  I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
  I tried again on Saturday you have the same problem
  I'm now ignoring the update message that is very annoying because he wants me to update daily

  The bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

  I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

  ShapiroPE wrote:

  I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

  No I don't have this problem.

  If you do not know your iTunes backup encryption, then you won't be able to use it.

• Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  It sets obtained :-) Sorry for the delay

  Thank you very much! has worked perfectly!

• LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  Check your hosts file.  to help with this and more:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• Hello, I would like to turn off my combination because it is more than a month that I can't use the service

  Hello, I would like to turn off my combination because it is more than a month that I can't use the service

  Contact support by web chat or by phone.

  Mylenium

• I just bought an IPhone 6 Plus. When I get a text Message I get no advice or vibrations. I have all the settings correct. I know many others with the same problem with this phone. Any suggestions?

  I have just purchased IPhone 6 Plus. When I get a text Message I get no notification - no vibration and no noise. I put everything correctly. I know several others who have the same problems with this phone. Any suggestions?

  I have the same problem. You own an iPhone 6 Plus 2/9. Problems began the next day. Phone took over and got another new. Problems with another brand new! Volume is also impoverished - even when up until the end. Extremely frustrated! Any advice would be appreciated.

• Cannot "turn on media streaming" - another user of Windows 7 with the same problem and the "suggested correction '' does not.

  This windows bug has been reported and 'responded' before by several people, but the "answers" do not work for me - and they do seem to work for a lot of people in this area and other forums.  I hope you can provide me with a real estate diagnosis, a reason for why this happens and a real solution that works for everyone.

  I'm trying to 'Turn on media streaming' in Windows Media Player so I can listen to my xbox and other home theater equipment.  The problem I have is the same problem as [of] other people have reported: in Windows Media Player, I press the turn on the 'link', the button greys streamin media shortly, but then nothing, and streaming is not enabled.

  I don't have a network problem.  I was able to extend Microsoft Media Center on my xbox.  (simply not enable streaming in WMP).  With media center extended is a large (better) workaround for the xbox, but this isn't a solution for my other home theater devices. I need to be able to listen to my receiver and blu - ray player, as I have done on my old PC running Windows XP.

  I have a fresh install of Windows 7 Pro, x-64 on a new machine of self-building.  Everything else works, it is not the machine.  I installed all the latest drivers for my machine.  I have all the updates for Windows 7.  I run the Windows Firewall and Kaspersky Anti Virus 2010.  I installed Microsoft Office 2007, Outlook 2007, Visio 2010 and many other applications 'standard '.  I'm not under any program of low-level "weird."

  As other people "suggested", already tried the action of the outgoing WMP, stop the Windows Media Player Network Sharing Service using service.msc, then by removing the .wmdb (and other files but not directories) by my dirctory users/xxx/AppData/Local/Microsoft/Media Player, restart the Service of network share WMP using services.msc and then restarting WMP.  This had no effect.  (I tried several times with and without having to restart WMP network sharing service manually.)  I tried to change the Windows Media Player Network Sharing Service, tab log (the default on my system) Network Service to Local System with "allow service to interact with desktop" chosen as someone another "suggested".  This does not seem to do anything.  I also tried to uninstall WMP and WMC player (using "turn Windows has or disable"), restart, then adding them and reboot.  This time this icon "turn media sharing on" returned in WMP (the icon is usually party WMP Stream/turn on media sharing window).  This time Windows 7 Pro thought a little longer before doing nothing.  (However, now I get a message error "an error has occurred. Not all features have been changed successfully. "in an attempt to"Reinstall"Windows Media Center after you have reinstalled WMP.)  The resettlement of WMC has returned an error.  I can no longer start Windows Media Center on my PC.

  So, by all posts on this topic, its obvious this is a real bug in Windows 7 (maybe?), (perhaps only on x - 64?).

  Just two more things on my setup... I did not initially set up homegroup (because I have no other Windows 7 machines), but I tried that implemented to see if it had an effect (it didn't).  The part only 'weird' of my installation, I mounted my D: drive (2nd hard drive) in C:\Users (because I use a Solid State Drive for the operating system on C: and don't want the user data on this subject).  This has not caused other problems, but I wanted to throw it out there in case Windows Media Player sharing is something weird here.  (And no, I'm not going to 'try to change' that, unless it is a known fact that that's the problem - and then I would need a different solution to move my user data off the coast of the SSD.)

  So please, let me know what is the real problem why it happened to me (I'm sure some people can turn on streaming in WMP), and what is the real solution.  (There seems to be a multitude of suggestions on the web for all kinds of different 'fixed', but which, if any, is the right one?)  Please do not just suggest things to try.  What is the right benchmark?

  Go to network and sharing center open view full map, right click on your PC and click on manage.

  then open services and applications, and then serivces and find Upnp device host, right click and click on reboot and make sure that it is set to automatic.

  Now scroll down to Windows Media Player Network Sharing service, do a right click and click on reboot and make sure that it is set to automatic also.

  It should work, it worked for me and everyone I know but... The only problem I have is when I restart my PC, the drive share Windows Media network service changes from automatic to automatic (delayed start) and I have to restart again the Upnp device host and Windows Media Player network sharing service.

  Other than having to do every time I restart my PC, it works perfectly.

  Also, if anyone has an idea of why it changes (delayed start) let me know thanks...