The fan runs super fast. HP Compaq dc5100 SFF

Similar Questions

• Battery Tecra M11-130 with not power and the fan runs constantly

  We are having a problem with the battery on one of our laptops. When left for an hour or two the laptop turns off because the battery is dead. We have mounted a battery new but still only get about 1.5 hours.
  In addition, the fan runs continuously. I looked at the PC Healthcheck software which shows as follows:
  * Power *.
  Other costs 14%
  40% of energy consumption system
  Good battery
  * Temperature and fan *.
  CPU temperature 67%
  System internal temperature 56%
  88% fan speed

  I would like suggestions.

  > We have mounted a battery new but still only get about 1.5 hours.

  1.5 hours is a common value, you should consider that dough working time depends on its portable use.

  Battery needed to dump a lot faster if the CPU would be stressed out a lot in your case, that something could run in the background, lose power CPU performance and the dough.

  In addition, you said that the fan runs constantly this could discharge the battery too.
  Therefore, it would be interesting to know what process emphasizes the central unit.

  Start the Task Manager and check the processes tab. In the CPU column, you can find the process that emphasizes the central unit.

  In addition, to change the settings for the CPU performance and cooling of the activities in the options of Win 7 powers that would help to increase the performance of the battery.

• Qosmio F30-112: cooling fan runs very fast

  Hello

  I want someone ask them, my computer laptop qosmio F30 - 112 recently whenever I start my computer, I heard that the cooling fan runs very fast (I mean) it wasn't stop differently than before his execution smooth only I heard when I play games but not continuous, then after that my computer now running slow.

  Can someone help me what im going to do?

  Thanks: rtmasagca

  Hello

  F30 is a little older series laptop I think about 3 years or more... you cleaned the cooling modules in the meantime?
  I think there is a lot of dust and debris inside the laptop and I think that keeps air from traffic and therefore fans run faster.
  Try the compressed air jet that should help to remove dust and debris.

  Good luck

• iMac very slow and short HOT.  the fan runs almost constantly

  My iMac 2011 short middle slow and often gets "the ball" of the computer runs hot (uncomfortable keep the hand on top) and the fan is almost always running.  Activity monitor shows the low CPU usage. Any ideas?

  EntreCheck report is due to:

  EtreCheck release: 2.9.4 (254)

  Report generated 2016-02-18 12:04:46

  Download EtreCheck from http://etrecheck.com

  Time 03:31

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Description:

  iMac computer is slow, get the beach ball often enough and the fan runs almost constantly because the computer heats

  Hardware Information: ⓘ

  iMac (27 inch, mid 2011)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac12, 2

  1 2.7 GHz Intel Core i5 CPU: 4 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  AMD Radeon HD 6770M - VRAM: 512 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X Yosemite 10.10.5 (14F1605) - since the start time: about 5 days

  Disc information: ⓘ

  WDC WD1001FALS-403AA0 disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 999,35 go-go (577,56 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  HL-DT-STDVDRW GA32N)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  HP Photosmart 8400 series

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub keyboard Apple, Inc.

  Apple Inc. Apple Keyboard

  Apple internal memory card reader

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [loading]. Cycling74.driver.Soundflower (1.5.1 - 2016-02-09) [Support]

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.4 - 10.4 SDK - 2016-02-09) [Support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.4 - 10.4 SDK - 2014-01-27) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.4 - SDK 10.5 - 2014-01-27) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.4 - 10.4 SDK - 2014-01-27) [Support]

  Startup items: ⓘ

  HP USB EWS Gateway: Path: Library/StartupItems/HP USB EWS Gateway

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  com.apple.AirPlayUIAgent.plist [killed]

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.EscrowSecurityAlert.plist [killed]

  com.Apple.cloudphotosd.plist [killed]

  com.Apple.cmfsyncagent.plist [killed]

  com.Apple.CoreServices.appleid.authentication.plist [killed]

  com.Apple.gamed.plist [killed]

  com.Apple.photolibraryd.plist [killed]

  com.Apple.printuitool.agent.plist [killed]

  com.Apple.RCD.plist [killed]

  com.Apple.SBD.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  [loading] 141 tasks Apple

  [operation] 58 tasks Apple

  13 killed process lack of RAM

  Launch system demons: ⓘ

  com.Apple.awdd.plist [killed]

  com.Apple.ctkd.plist [killed]

  com.Apple.Emond.aslmanager.plist [killed]

  com.Apple.icloud.findmydeviced.plist [killed]

  com.Apple.ifdreader.plist [killed]

  com.Apple.nehelper.plist [killed]

  [killed] com.apple.periodic - daily.plist

  [killed] com.apple.periodic - weekly.plist

  com.Apple.wdhelper.plist [killed]

  [loading] 173 tasks Apple

  [operation] 80 tasks Apple

  9 killed process lack of RAM

  Launch officers: ⓘ

  [loading] com.maintain.CocktailPurgeInactiveMemory.plist (2013-11-21) [Support]

  [failure] com.maintain.CocktailSystemEvents.plist (2012-07-08) [Support]

  [loading] com.maintain.LogOut.plist (2014-02-17) [Support]

  [loading] com.maintain.Restart.plist (2014-02-17) [Support]

  [loading] com.maintain.ShutDown.plist (2014-02-17) [Support]

  [loading] com.maintain.Sleep.plist (2014-02-17) [Support]

  [operation] com.maintain.SystemEvents.plist (2014-02-17) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-01-28) [Support]

  [loading] com.maintain.CocktailScheduler.plist (2016-02-18) [Support]

  [operation] com.memeo.WDMemeod.plist (2007-07-30) [Support]

  [loading] com.rogueamoeba.hermes.plist (2010-09-28) [Support]

  User launch officers: ⓘ

  com.apple.MobileMeSyncClientAgent.plist [failure]

  com.apple.SafariBookmarksSyncer.plist [failure]

  [loading] com.google.keystone.agent.plist (2015-12-14) [Support]

  [operation] ws.agile.1PasswordAgent.plist (2013-12-07) [Support]

  Items in user login: ⓘ

  iTunesHelper UNKNOWN (missing value)

  HP Photosmart Menu Application (/ Applications/Hewlett-Packard/Photosmart/HP Photosmart Menu.app) (2006-10-22)

  Airport demand of basic Station Agent (/ System/Library/CoreServices/AirPort Base Station Agent.app) (2014-10-07)

  Request for SmileboxTray (/ Applications/Smilebox.app/Contents/Resources/SmileboxTray.app) (2016-02-12)

  The messages application (/ Applications/Messages.app) (2015-08-19)

  WDMemeoAgent Application (/ Library/Application Support/Memeo/WD anywhere Backup/Agents/WDMemeoAgent.app) (2009-06-24)

  HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app) (2010-09-17)

  Director Docker Application (/ Applications/Hewlett-Packard/HP Photo & imaging software/HP Photo and imaging Director/Director Docker.app) (2006-10-22)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword4 - helper (2016-02-09)

  com [running]. Growl.GrowlHelperApp.89492 (2006-12-30)

  com [running]. Memeo.WDAnywhereAgent.87504 (2009-06-24)

  [operation] com.apple.xpc.launchd.oneshot.0x1000000a.EtreCheck (2016-02-14)

  [operation] com.smilebox.Tray.61376 (2016-02-12)

  [operation] jp.co.canon.cijscannerregister.17640 (2011-05-04)

  Plug-ins Internet: ⓘ

  Flip4Mac WMV Plugin: 2.3.0.14 (2009-09-28) [Support]

  FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

  QuickTime Plugin: 7.7.3 (2016-02-09)

  Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

  AdobePDFViewer: Unknown (2010-04-23)

  Default browser: 600 - SDK 10.10 (2015-07-16)

  Web of Google Earth plugin: 6.1 (2011-10-17) [Support]

  Silverlight: 5.1.40728.0 - SDK 10.6 (2015-11-04) [Support]

  DirectorShockwave: 12.1.7r157 - SDK 10.6 (2015-02-05) [Support]

  iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-18)

  User Plug-ins internet: ⓘ

  RealPlayer Plugin: unknown

  Safari extensions: ⓘ

  1Password (2016-01-25)

  3rd party preference panes: ⓘ

  Flash Player (2016-01-28) [Support]

  Flip4Mac WMV (2009-09-28) [Support]

  Growl (2006-12-30) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 421,79 GB

  Destinations:

  Time Capsul of Alan W. Voges [network]

  Total size: 2.00 TB

  Total number of backups: 65

  An older backup: 08/29/15, 06:56

  Last backup: 18/02/16, 11:39

  Size of backup drive: adequate

  Backup TB 2.00 size > (disc 421,79 GB X 3)

  Top of page process CPU: ⓘ

  4% WindowServer

  2% fontd

  2% safari

  1% kernel_task

  1% sysmond

  Top of page process of memory: ⓘ

  633 MB kernel_task

  Com.apple.WebKit.WebContent (4) 299 MB

  172MO Mail

  Safari of 147 MB

  Overview of 78 MB

  Virtual memory information: ⓘ

  504 MB of free RAM

  3.50 used GB RAM (1.12 GB being cached)

  174 MB used Swap

  Diagnostic information: ⓘ

  February 16, 2016, 12:31:30 Library/Logs/DiagnosticReports/Mail_2016-02-16-123130_[redacted].cpu_resource. diag [details]

  /Applications/mail.app/Contents/MacOS/mail

  February 16, 2016, 08:15:06 /Library/Logs/DiagnosticReports/Inkjet6_2016-02-16-081506_[redacted].crash

  /Library/printers/HP/cups/Inkjet6.driver/Contents/MacOS/Inkjet6

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• The fan runs continuously. Firefox unresponsive, slow.

  The fan runs continuously. Firefox unresponsive, slow. While all slow running. Reboot and it's ok for a few seconds and then back to fan works etc...

  Reset the SMC reset management system (SCM) controller on your Mac - Apple Support

• the fan runs full speed at the beginning upward

  HP Pavilion p6-2037cb bought 19/01/12.  Windows 7.  There is no error message.

  When I turn on the computer after it has stopped all night the fan running at full speed.  This has happened several times in the first month.  The first time, he stopped himself after a few minutes.  Then I learned to stop it by restarting the computer simply.  It still works, but what was once happen one or two times a month, happened twice in two days then you worry I the problem worsens.

  It never happens when I use the computer because I don't do anything that requires a lot of cpu or causes a warm-up.  I just surf the web and send e-mail.  No games or videos or TV.

  If it's a problem of connection fan I would like to know the nearest repair service.  I would rather that ship it.  But I can't find a list of authorized warranty repair service center.  I followed the links on HP Support Assistant but got sent to a site that does not list the pavilions.

  I need to know why the fan runs full speed at first upward and where to repair close to where I live.

  Hello mpw101,

  It seems that there is some confusion about the products of your receipt and how he explained. I have passed your thread to appropriate to review team. Someone must be in contact with you shortly so that you can discuss your experience of HP customer care.

• Satellite Pro S500 - 11 c is suspended and the fan runs at full

  Hi people,

  I am experiancing a problem with my Satellite Pro S500 - 11 c where close unexpectedly, it crashes and the fan runs at full speed. Discount to zero is my only option and this resulted in the windows having to retrieve a few times so I'm fearing one requiring a major reconstruction after a deadlock of the future. Until now this issue has occurred only when you use a wireless USB mobile of 3G or internet teathering via USB with my iphone 3G. Using another USB port did not help.

  If someone has encountered this problem and have a fix? No help from Toshiba?

  Best regards

  Andrew

  Hmmmm... What to say. Problem is that you use third party hardware and software and some conflicts are possible. The question is: who can help you with this?
  In general you should talk to your ISP provider at first to see what they will say about all this.

  Have you ever talked with them?

• HP Envy 23 all-in-one. : HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs.

  HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs. After that I opened start legacy and power cord from my puss. Help me please.

  Hi there @ZiECloNE,

  Welcome to the Forums of HP Support!  I understand that you are no longer able to boot your computer after a "event for pets.  I'm happy to help you with this.

  Don't forget to check all of your connections, power cord, power adapter, and maybe try another outlet and a direct connection to wall.  If there is no change then the following test: desktop HP - computer starts not (Windows 10.8)

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Hi, my computer shuts down randomly and the fan is very fast and strong

  the fan is constantly fast and strong, my computer frequently stops randomly usual when some sites of casino play slot machine

  Probably the heat, especially if it's a laptop.  You have blown out through the etc air vents?

  Are using you it on a flat, hard surface (or is it in your knees)?

  We need the specs of your system.

• Windows vista screen remain black but the power and the fan runs

  I have a laptop of 5 years that I use for school. Normally, I have my laptop on the way 'sleep' but one day, that the display lights «» I press the power button to restart and it stops, however, when I turn it on, it will only show power and the fan runs. The screen remains black. Can someone help me, I need to access my documents from the school.

  Thank you
  c

  Hello

  Video card problems are the most common cause of this problem.

  Method 1:
  Reinstall your video driver a. right click on the taskbar and then click Start Task Manager.
  b. click on the processes tab, click explorer.exe and then click on end process.
  c. click file and then click New task (run).
  (d) in the text box to open, type explorer.exe, and then click OK.
  e. click the Start button, type device manager in the start search box, and then, in the search results.
  Click on Device Manager.
  f. double click on display adapters, right click the display device, click Update driver software and then follow the steps in the wizard that appears.

  Method 2:

  Start the computer in safe mode and run system restore

  a. click the Start button, click the arrow next to Shut Down and then click on restart.
  b. do one of the following:

  • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.
  d. connect to your computer with an account of a user who has administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.
  e. click the Start button, type "System Restore" in the search box, click System Restore, and then click Next.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  f. choose a restore point when your PC worked as expected, click Next and then click Finish.
  g. restart your computer normally.

  Keep us updated on the status of the issue.

• do not sleep when I close the lid of the computer. Everytime I open the lid there is message that computer prepares to lock, then go to the login page. Computer gets too hot and the fan runs constantly

  I have Dell laptop with vista .lately my computer stop to sleep when I close read although the power option have been that he sleeps when the cover is closed. Everytime I open the lid it is message that ' the computer prepares lock ' and in a few seconds, it goes back to the login page. during computer work becomes too hot and the fan runs constantly even if I close the lid.

  Hello

  Follow these steps:

  
  Step 1: I suggest you to download the latest drivers for the graphics card and install it on the system and check. See the article mentioned below.

  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  Step 2: disable the Option "Allow this device to wake the computer" for a device

  a. open the control panel.
  b. click the Device Manager icon.
  c. click on continue in the UAC prompt.
  d. right-click on the network adapter and click Properties.
  e. click the power management tab.
  f. uncheck allow this device to wake the computer.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• HP compaq dc5100 sff: loss of internet connection on desktop after installing windows 10

  Update from windows 7 to windows 10 and I lost my internet connection. My connection is good, the son, all good router. Windows 10 seems to work great except no internet. She said "not connected-no connections are available. So is it not reconizing him actions card built in the Board of directors or what. I tried to reload the drivers. I can use any help I can get. I have a hp compaq dc5100 sff with 3 GHz, computer of office 2 GB of ram. I've updated my laptop and it works fine. If I can't understand, I guess I'll go back to windows 7. Ideals, let me know...

  Ok.

  The only suggestion I can offer would be to install the latest driver ethernet directly from BCM and see if it works.

  I think you need the first driver on the list for 32 bit.

  http://www.Broadcom.com/support/?GID=9

  You will need to manually install the driver for the adapter ethernet BCM in the Device Manager, as the file contains only the driver files and no setup.exe file.

• Satellite A505-S6973 is overheating and the fan runs often

  I hate doing this, but it seems to me have encountered another problem that I was responsible for research and reading hoping to correct me. I currently own a Satellite series laptop PC with an Intel Cor 2 Duo T6500 processor 2.1Ghz.

  I followed my system for performance issues andi who have noticed for some time (not sure when) has significantly increased the temperature on my system. I'm seeing from my PC Health Monitor my processors running at 59% temperature and fan speed is at 78% and yet when I place my hand near the cooling fins on the side of my laptop, I can barely feel any breeze, but a colleague of mine has a vostro and fan feels like it will run on amendments.

  If there is nothing that can be done, I would be very happy, I'm afraid of losing my system because of something simple that cause overheating.

  NB. I noticed that at the same time different users posted threads indicating that after updating he BIOS they have known overheating problems. If this is the cause of anywhere near it please help.

  Hello

  Just a question;
  The unit automatically shut?

  If this is not the case then you cannot talk about overheating only because the temperature has risen to a higher level.
  The temperature of the laptop up and down and it depends on the use of the laptop.
  The cooling fans would go faster too if the temperature would be going upward.

  It's not unusual and it s a common behavior of mobile.

  As I said; the laptop would be down automatically stops if the temperature would be too high! If this isn't the case, then you should not be worried about the temperature.

  Welcome them

• Satellite A100 - the fan runs at high speed after idle standby

  Hello

  My laptop is Satellite A100-912.

  The problem is when I suspend it for more the a few minutes when the fan is running at high speed. This occurs on both Windows XP and Linux GNU. When the temperature of the two nuclei will more then 51 degrees C fan slows down and begins to work as expected. Suspended for a short time (about a minute or two) the fan speed is OK.

  I've updated to the latest version of the BIOS.

  Hello

  What version of BIOS you have installed? Has recently been the machine in for repair? A few interesting facts where I need some information to help you...
  By the way: is your machine still in warranty?

  Welcome them