The fatal limit TSSTcorp CDDVDW TS - H653Z ATA Device

Similar Questions

• Reinstall for TSST corp CDDVDW TS - L633B ATA device

  I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

  I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

  Here is the solution to update your device with the latest driver of Toshiba/Samsung.

  Introductory material.

  
  

  1 here is the update for TSSTcorp CDDVDW TS-L633B ATA DEVICE.

  2. There is a update for the Samsung TS-L633B, but there only version SC01, which WILL NOT be updated the version of the TS-L633B HP because HP version is 0301 with an OEM Code of HM.

  3. However, Samsung has renamed TS-L633B with a new device driver ATA which is called SN-S083B and has a pilot SC02 update.

  4. the way that you update TS-L633B Code 0301 Version with HM Code OEM with the new Samsung SN - S083B Version SC02 Code is to patch the file and flash TS-L633B HP with the patched file.

  Instructions.

  
  

  IMPORTANT - THIS ONLY REFERS to those who have the HP TSSTcorp CDDVDW TS - L633B ATA Device - check device manager to make sure that you have this model number device driver before you start - YOU DO THIS at YOUR OWN RISK. Proceed only if your product is not guaranteed and do not wish to pay for another DVD player.

  1. click on the following link and download the firmware SB02. Global Distribution of SN-S083B: http://www.firmwarehq.com/download_1380-file_SN-S083B_SB02.exe.html

  2. If you don't have a utility program unzipped, click on the following link and download and install 7zip that corresponds to your computer from the following link: http://www.7-zip.org/download.html

  The BIN SN-S083B unzip using 7zip by right clicking on it and choosing 7ZIP > extract here.

  3 download the Flash Samsung Standalone utility:

  http://www.samsungodd.com/KorLib/file/tsdnwin.exe

  4. download and unzip http://ala42.cdfreaks.com/MCSE/MediaCodeSpeedEdit.zip to ala42 MCSE

  Download source: http://ala42.cdfreaks.com/MCSE/

  5 create a folder and name it FLASH and place the following 3 items in the folder.

  SN - S083B_SB02.bin that you have checked out

  Flashing Samsung Standalone utility

  MCSE of Ala42 you have downloaded and extracted the zip file

  6. After you have placed all three objects in step 5 in the folder named FLASH, place the FLASH folder and all of its contents in the C drive.

  7. After placing the FLASH folder in C drive, open the folder and CLICK on RUN AS ADMINISTRATOR and ALA42 MediaCodeSpeedEdit.exe RIGHT.

  8. when ALA42 MediaCodeSpeedEdit.exe opens, click the LOAD button and place you in the FLASH folder in C drive and load the file SN - S083B_SB02.bin - when the file it load it will show all of its regions.

  9. once the file SN - S083B_SB02.bin is fully loaded, place a check MARK in the area of CPR1 in the lower right of ALA42 MCSE.

  10. After putting a check in the box by ALA42 MCSE CPR1, click SAVE in the upper right and save the file in the file FLASH as SN - S083B_SB02_speedpatched.bin.

  11. now go to START > all PROGRAMS > ACCESSORIES > COMMAND PROMPT and right click on command prompt and choose RUN AS ADMINISTRATOR to open the command prompt in the Administrator role.

  12. once the command prompt opens, type the following command: CD C:\FLASH and press the ENTER KEY.

  13 after hitting the button enter, the command prompt should read FLASH.

  14. to the FLASH command prompt, type the following: nocheck tsdnwin and press the Enter button to open the flashing Samsung Stand Alone.

  15. when the flashing Samsung Stand Alone opens, click on the on button SEARCH and navigate to the file 'SN - S083B_SB02_speedpatched.bin"to load it into Samsung's Flash utility.

  16. the file "SN - S083B_SB02_speedpatched.bin ' will load and click on DOWNLOAD to start flashing your TS-L633B ATA Device.

  Wait until the flash is finished and when it finishes, it will ask you to restart the computer and you must restart.

  When you rebott and are back at your desk, Windows will recognize the drivers for your TS-L633B ATA Device and install the new drivers SN-S083B_SB02.

  When it finishes installing your drivers, restart the computer once more, and then you're done.

  NOW ENJOY your CD/DVD-RW drive updated.

• Driver TSST Corp CDDVDW TS - L633L ATA Device will not load. The problem code is 19 / how to fix?

  HP Pavilion dv4
  TSST Corp CDDVDW TS-L633L ATA Device

  Control Panel / problem report and solutions
  Problem: Could not load software driver status: sent report

  Description
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.

  Signature of the problem
  Problem event name: PnPDeviceProblemCode
  Architecture: x 64
  Hardware ID: IDE\CdRomTSSTcorp_CDDVDW_TS-L633L___0400___
  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 00000013
  Driver name: cdrom.sys
  Driver version: 6.0.6002.18005
  Driver date: 11/04/2009
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Additional information about the problem
  Bucket ID: 619663520

  Control Panel / Device Manager
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried:
  Update driver software
  Uninstall / find the hardware changes
  Uninstall / reboot / new hardware found
  Properties / verification solutions

  How can I fix it?

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  You have to restart the laptop after that.

  Kind regards

  DP - K

• HP G60-535DX Notebook PC CDDVDW TS-L633M ATA Device

  I have a HP G60-535DX laptop and Norton has found a corrupt driver: CDDVDW TS - L633M ATA Device.  I uninstalled and tried to find an answer here on HP.COM, but fails.  How can I get a new driver?

  Hello:

  Please read the info at the link below.

  One of the steps in resolution 2-5 should work for you.

  http://support.Microsoft.com/kb/314060

• Computer does not recognize the driver for HL-DT-STDVDRRWGSA-H2OL ATA Device

  original title: HL-DT-STDVDRRWGSA-H2OL ATA Device

  its as it disappeared from my machine. the computer will recognize the pilot but but the drive does not appear when I go to computer file. If you insert a cd in the drive, it runs but can not read the cd/dvd.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• TSSTcorp CDDVDW TS - L633M ATA drivers needed

  My dvd drive has stopped working so I uninstalled in Device Manager and then restarted and it can not find drivers to reinstall.

  I also do not find anything on the internet.

  TSST is obscure.

  the samsung live update tool does not work (I read that it was the tool to use)

  Someone help?

  I have presario CQ61 223SA

  See you soon

  All fixed. Had to remove the upper and lower filters in the registry

• bad configuration in the registry for a TSST corp CDDVDW SH-S2333C ATA device, how can I fix?

  the computer gives a malfunction code 19.

  IN Dutch "Kan said expensive niet starten configuratiegegevens omdat in het register onvolledig beschadigd zijn. '. (Code 19) »

  Cannot install device because configuration information is corrupted incomplete. How can I fix?

  Hello
  If please see the following thread and follow the steps described in. This should help to solve this problem.

  http://support.Microsoft.com/kb/314060

  I hope this helps. Just reply to the results.

• Remove HARDWARE TSSTcorp CDDVDW TS - L633L ATA (E :)) error/Virus?)

  I'm the 'Safely Remove Hardware' in the lower right of my toolbar whenever I restart my system.  It shows that it is 'OK' to remove my CDDVD burner that is not a USB device, or is it plugged into my computer external (it is a device internal).  I have uninstalled/reinstalled the drive, I have uninstalled/reinstalled all Bus controllers series and I reinstalled physically the disc so all to nothing does not.  Someone told me it might be a virus but I ran Security Essentials and it did not pick up.  I just update my BIOS, do not know if it has nothing to do with it?  Any ideas?

  Hello

  Have you tried the solution I posted above? He was called to work.

  Low-level chipset drivers are available from the maker system (the card mother and maker if a custom)
  suystem) and the actual machine of the chipset such as Intel, AMD, Nvidia and so on (we are not talking
  on the video here).

  To see which chipset Start - type in the box search--> find information system at the top and double click
  on this subject. This information is also available from the system manufacturer or the motherboard.

  It would be an unusual problem for pilots of the chipset level low cause although anything is possible.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite A200 - TSST corp CDDVDW TS - L632H ATA Device no work

  I'm not the most computer savvy person so I need a little help.

  The device status says:
  + This device cannot start. (Code 10) +.

  It also tells me click + "search for solutions ' +. When I do a pop up appears and says that Windows does not load driver software.

  Any help is appreciated.
  In addition, under Vista.

  Thank you
  Lucas

  This can occur when you install the CD/DVD software not designed for Vista. For example if you install iTunes v6 for XP, it can load a filter incompatible Vista driver and cause problems.

  Try to remove the UpperFilters and Lowerfilters. Sollow this guide: http://support.microsoft.com/default.aspx?id=314060

• HP G56-130SA LAPTOP: CDDVDW TS-L633N ATA DEVICE

  Suddenly, the EJECT command does not work. I had to use a paper clip to open the player. After loading cd and drive of closing, the pc doesn't seem to know that there is a cd in the drive. Double click on the drive a message requires the player to load!

  In my opinion there is no communication between the reader and the pc. Please confirm, or otherwise and to advise the right plan of action to address the above. Thanks much for any help.

  Hello
  
  I replace the optical drive with a new one and check. Engage with the replacement of the cable connector later.
  
  12.7 mm fixed SATA optical drive: LightScribe SuperMulti DVD±R/RW with Support Double layer
  
  Data sheet:
  http://support.HP.com/GB-en/document/c02540068
  
  Manual - page 23, 24: http://h10032.www1.hp.com/ctg/Manual/c02657369
  
  Source: http://support.hp.com/us-en/product/HP-G56-Notebook-PC-series/4247525/model/4326441/manuals
  
  ODD includes bezel and support, HP part number: 620604-001
  ODD connector cable is not saved separately, it is included in the cables, so you have to buy that, HP part number: 595201-001
  
  Page 39-41 shows the replacement procedure.
  
  Concerning
  
  Visruth

• TSST Corp CDDVDW TS-L633M ATA Device

  My cd/dvd-rom does not work! I did all the patches... uninstall it from the Device Manager and restart the computer; delete upper/lower case filters in the registry. Update device drivers; computer brought to the factory settings; Restore at a better time; Reinstall the software; etc, etc, etc! So, in properties, it says my file system is unknown, but in the State of the device it says that my device working properly in my HP Advisor it says my drive (E :) is empty bay... it wont read/write/open/discovery/or do something... Please help will stir crazy!)

  Oh yes, I have Windows Vista and you have not updated my operating system or whatever it is, the last time it worked was two months ago. THANKS :)

  Hello

  ·         You are using a desktop computer or a laptop?

  The issue that you are facing may occur due to the static energy storage in the computer. I suggest a system power cycle and check if it helps:

  1. disconnect any external devices to the laptop.

  2 remove the battery from the laptop.

  3. press the power button of the laptop for 10-15 seconds.

  4. Insert the battery in the laptop and restart the computer.

  5. check if the DVD player works fine.

• Cannot locate the drive HL-DT-ST BDDVDRW CT21N ATA Device after format

  Hello

  I am new to this so I'm sorry if I look stupid. I have an Acer Aspire 7745 G with the player above. Normally, I reformat my laptop every 6 months as a recommendation from a friend. Last month I got a virus and Kaspersky has taken care of her, but there was something else that kept install toolbars. In any case, I decided to reformat only since I was close to my schedule. I loaded the restore disc that I had to buy Acer. Come to find out it does not recognize the drive. Came with a blank CD notification. I tried all 5 disks from Acer and still the same error. I advanced and bought another set of recovery disks. Always the same question. In the end, I bought WIndows 7 home and tried this drive. The drive did not no more. I went to my office and copied the disc to complete installation on a USB Flash drive. I then force the PC to boot from that drive and installed WIndows 7 like that. Now, the player does not seem to read retail DVD, bluray discs, game to retail discs but do not read music cd or any other medium of CD/DVD burning and always used to read the disks from Acer. The disks it will read are verified to work on the desktop.

  In the description of the material, it shows a Microsoft driver dated 06/21/2006 with a version of 6.1.7601.17514. It only gives me the opportunity to update the driver. I tried the Microsoft Mr. Fixit from their site and it won't fix it. I contacted Acer and they said that my phone was not guaranteed, and they can't help me. They have no drivers on their site for this drive and after that a few weeks of research, I can't find drivers or firmware. I found a site that said to delete the upper and lower registry filter and I did but still nothing. I have WinDVD 2010 Pro, Nero 11 Platimun, 4.8 installed PowerISO, do not know if these programs could affect it or not. Also, I thought that I could just copy these 5 discs to a USB Flash drive and try to do a restore that way, but I do not know multiple-disks-on-one-flash-drive procedures or withdrawal of the drive in the list of material and to force a reinstall but I fear (and with my luck so far) he won't return.  I don't know what to do, and it's frustrating. I was hoping that someone out there may have some ideas for me.

  Thank you very much for any help, I appreciate it!

  John

  I have trouble to imagine why you would format/reinstall every 6 months.

  And as to why you should buy for a PC restore disks that came with win is beyond me, since no matter what PC that is pre-installed with win has a way to create the recovery disks provided by the PC manufacturer.

  If the recovery disks provided by the PC manufacturer have been unable to locate the reader, you have a problem of basic material either the disks are defective (unlikely)

• HP cddvdw ts-h653r ata device driver error

  I can access is no longer my DVD player.  Looking at the Device Manager, it says there is a problem, Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).  Where can I find the device driver for this drive?

  Hello

  Please use this:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Kind regards.

• Driver for TSSTcorp CDDVDW SN-208AB does not work.

  Hi, I have a problem with the driver for TSSTcorp CDDVDW SN-208AB. My computer is a Toshiba Satellite L850 - 1 L 1 with windows 8. I bought it 3/4 months ago, and I think this is the first time that I had to use the CD input, but the computer does not recognize the CD driver, so I can't access and use. When I go to Device Manager, there is a symbol of error and the specific error is something like (I've translated it in English to Italian): "cannot start this hardware device. The configuration in the registry information is incomplete or damaged. (Code 19) ». I read that other people have had a similar problem, but I really don't understand how this could happen, because it's a new computer.
  How can I solve this problem?

  Thanks to advice

  Thank you
  I had already tried this solution, without success. But this time, I don't know why and how it worked!
  I can finally use the CD driver!

• Optiarc DVD RW AD - 7560A ATA DEVICE do not work

  My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
  1 device state poster (this device cannot start. (code 10)).
  2 update driver... shows that the best device driver software is already installed.
  3. it is the driver of manufacturing.
  4 driver provider Microsoft Driver version - 6.0.601. 18000, manufacturer-(Standard CD-ROM drives)

  Hope that enough information... Oh, my computer is computer laptop Windows Vista Service Pack 1, Sony VAIO - VGN-NR22OE.

  Grateful for any advice...

  Hi Nikki 801,

  Can you please try these steps?  Be very careful when you edit the registry.  If you would please do not delete anything immediately.  If you must please the following steps... If upper and lower filters is not in this registry key, simply leave the registry.

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  1. Click Start
     Collapse this includes this image

     

     type regedit in the Search box, and then click regedit in the programs list.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  3. In the pane, click UpperFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the UpperFilters registry entry.
  5. In the pane, click LowerFilters, and then click Remove.
  6. Click Yes to confirm the deletion of the LowerFilters registry entry.
  7. Exit the registry editor and restart the computer.

  If you please you would follow with me as best as possible, I'd be very happy.

  Thank you

  Aaron Griffin
  Support engineer
  Microsoft technical support