The fcpcmcia.sys file is not found on a Portege M200

Similar Questions

• Why the beats start file is not found on my TouchSmart 320-1050?

  I have a 320-1050 Touchsmart from HP with Windows 7 64 bit operating system.  When I try to open the software of beats, I get an error message saying that the boot file is not found.  I have not made any changes to my computer and that you have not added new programs.

  Hello Shirley,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56045.exe

  One time finished, open windows control panel, open programs and features, locate the Audio IDT entry, right click and select uninstall.

  When this has completed, restart the computer.

  Let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• External BB10 Webworks/Cordova opening HTML pages on the device: "this file is not found. Check the URL and try again. »

  Hello fellow people,.

  IM quite in my application of Cordova/Webworks which downloads and save an html file in the SD (blackberry.io.sharedFolder).

  At this point, the config.xml file is defined as:

  read_device_identifying_informationermit >

  access_sharedermit >

  ermissions >

  Now, I'm trying to open the downloaded html that is saved to file:

  /Accounts/1000/removable/SDCard/MainFolder/subfolder/file.html

  My webapp, I try to open as: window.open (path, _self);

  Where path is the file above (which exists on the device!)

  Path is also, with the blackberry.io.SharedFolder + "/ MainFolder/SubFolder/file.html".< of="" that="">

  Also, I get the error:

  This file is not found. Check the URL and try again. If the URL is correct, check that your card is correctly inserted on your device.

  I am running and development off the BB10 Simulator.

  The console does not throw any error that I see.

  Any help or advice would be appreciated.

  See you soon,.

  @varunasingh

  Well, this is awkward.

  I have myself fixed by adding the string: "file://" on my road.

  I hope that others see it until they are too uptight.

  This has been resolved. Thanks for reading.

• The aqq12s0m.sys file could not be found when installing Win XP

  When I try to reinstall XP pro I get the message "the file aqq12s0m.sys is not found. Press any key to continue. "and when I press it, the computer restarts.

  No idea of this file?

  You said that you ve had overheating issues sometimes?

  These overheating problems are mainly related to clogged cooling fans.

  A simple cleaning should improve the speed of the fans and solve the overheating problem.

  You can use a jet of compressed air to get rid of dust and debris.
  I also use it and it helps! From time to time, I clean my fans to make sure that the laptop overheats not.

  Good bye

• The path to the silverligh.msi file is not found. Help

  It is quite annoying with games and everything. The exact process goes like this:

  1. try to install silverlight

  2 Windows install stands up and says that it cannot find the file silverlight.msi

  3. I click on try again and this message appears: the path'd:\c2d99a5897676369afb64b\silverlight.msi is not found. Check that you have access to this location and try again, or try to find the installation package 'silverlight.msi' as a folder that you can install the Microsoft Silverlight product.

  Hello

  Thanks for posting in the Microsoft community! You have reached the right forum for your question.

  Method 1

  There could be a part of the silverlight on your computer. I suggest you to uninstall silverlight completely and re - install.

  How to clean a facility damaged Silverlight and then reinstall Silverlight
  http://support.Microsoft.com/kb/2608523

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Method 2
  I suggest you try the steps from the following link:

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651#reso3

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• I have a Kodak ESP 3250 printer and guard appearing the following message "the user interface file is not found (Code: 101-8200)"

  Tried the solutions suggested in the windows click here for more information, but does not. The programs seem to work but cannot get rid of the message. Thank you.

  Windows 7 operating system

  Hi Michael,

  1. don't you make changes to the computer before this problem?

  2. What are all the steps you have done?

  3. when exactly you get this message?

  Follow these methods.

  Method 1.

  Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  We can refer to this article and check if that helps.

  Error: "the UI file is missing" (code 101-8200): http://support.en.kodak.ca/app/answers/detail/a_id/31863/selected/true

  Let us know if you need help with this question, we will be happy to offer you our help.

• Satellite Pro M10 Hibernate - error message "the file is not found.

  I have the Satellite Pro M10. I have problem in the power of Eve v6.00.04. When I want to activate the Hibernate mode it give a massage: * the file is not found. Please confirm the name of the specified file *.

  I can't use the hibernation mode. I tried to uninstall the Toshiba power saver and install again but the massage even come. If anyone has experienced the same problem and have a solution? Please advice

  When you active hibernating the operating system creates a file named hiberfil.sys in the root of your system drive.
  Of course, this file is missing in your installation.
  You can activate and disable hibernation in the system control-> power options.
  Disable hibernation, restart and enable again. Is there an error message? Maybe your C drive has insufficient free space?
  The size of the hibernation file is different from your main memory size.

• Unable to play the song in iTunes. Get a msg "original file is not found, you want to locate.

  Unable to play the song in iTunes.  When I double click on a song title, I get a msg "original file could not be found is located."  You want to locate? I click on locate, it then takes me to the music library folder that displays a list of the itunes library by date files.  If I click on one, it then brings back me to my list of songs.  I then double click on the song, and then get the msg "original msg was not found.  I can play the song in my folder to \My eMusic.  I think he's using Windows Media Player to play the song out of this folder.  Any help would be appreciated.

  Update: after a lot of research and trial and error efforts, I solved the problem.  For reasons unknown, the songs have an incorrect file path.  Will change the path on each song.

• Unable to launch programs error: could not open rtl120.bpl file is not found, try to reinstall the program

  Original title: difficulties to open programs

  I keep trying to open different programs but get a message that says "could not open rtl120.bpl file is not found, try reinstalling the program.»  My problem is that some of these programs came with my package on the computer and if I uninstall it then I have to pay to re install a new program.  How can I solve this problem?

  Hi JenniferAS,

  1. is the issue limited with a particular program?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  It is a file associated with a program called Tune Up Utilities 2010.

  Tune up Utilities is a suite of utility software for Microsoft Windows designed to help manage, maintain, optimize, configure and troubleshoot a computer system.

  Method 1: Uninstall and reinstall Tune - Up Utilities 2010 and see if that helps.

  Step 1: Uninstall tune-up Utilities 2010.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Step 2: Re-install tune-up Utilities 2010.

  Download tune-up from here:

  http://download.tune-up.com/TUU2010/TU2010TrialEN-GB.exe

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• my ipod not synce with my pc, says the requested file is not found

  I download music from itunes, couldn't remember my password had change. So I did then downloaded music, when I tried to sync it locked up my computer and would never sync. I can listen to music on my pc, but cannot get it on the ipod.

  Hi MarkWebb,

  You can follow the steps in these links and check if the problem persists:

  iPod cannot be synced.  Required folder cannot be found.

  "Requested file is not found."

  Hope the helps of information.
  Please post back and we do know.

• I get the message that running ' Ckdsk/f' the file is not found. I can't defragment drive c.

  I can't dfragment c drive. I get the message run Ckdsk/f. The file is not found.

  the command is CHKDSK /F.

  However, it is best to run this instead: CHKDSK /R

  It is unclear if you do not run the check disk drive correctly or if the check disk command / file is affected by the volatile file system.

  my suggestion is to acquire a xp boot cd and boot the recovery console.

  then when you get to the disk prompt run the command >: CHKDSK /R

  then type exit, remove the cd and boot into windows.

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• McAfee file is not found when I try to start the services stopped in the Computer Management Console.

  McAfee services ceased.  When I go to Services and try to start I get an error 2, "the file is not found."  I look in the programs and the file seems to be there.  I believe that the services were stopped due to Game Booster (which has stopped some services when you are playing a game).  I had turned on Game Booster, then I shut down the system without return - turn off Game Booster I believe that some of my services won.

  Uninstall mcafee in any case, his despair. Or uninstall it then reinstall it

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• Age of Empire 3. error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the CAB file ' Disk3C ~ 1.cab '.

  I recently bought Age of Empires 3 and tried to install it.  I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed.  I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode.  Any suggestions?

  Hi void 1337,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also follow the link and check if it solves the problem:

   

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  You can also view the article mentioned below to learn more:

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:

  http://Forum.AgeCommunity.com/

   

  Let us know if that helps.