The file c:\Windows\MEMORY. DMP was removed, what will happen without it?

Similar Questions

• Vista 64-bit for Windows 7 32 bit. What will happen to my laptop?

  I have VISTA 64 bit OS and I want to reformat my laptop to Windows 7 but I have Windows 7 32 bit. What will happen to my laptop if I install Windows 7 32 bit? I'm afraid that my laptop will be slow or something because I install 32 bit. Please help me...

  Hello

  There is no way to upgrade from Vista 64 bit to Windows 7 32 bit.

  It must be done with a clean install. as you say.

  It should work fine.

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  Have you checked if your computer is Compatible Windows 7?

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• What will happen to the computers that are still using Windows XP?

  Original title: Windows XP?

  So, what will happen to the computers that are still using windows xp? Say, my computer is too old to support something newer than XP

  On April 8, 2014, support and updates for Windows XP will be more available. Don't let not your PC not protected. 
  http://Windows.Microsoft.com/en-AU/Windows/end-support-help

  You need to consider your options carefully. You can always run XP but be aware of the risks. It is always your decision what you decide to do.

  Cyber-threats for Windows XP and advice to small businesses and individual consumers

  http://blogs.technet.com/b/Security/Archive/2014/03/24/cyber-threats-to-Windows-XP-and-guidance-for-small-businesses-and-individual-consumers.aspx

• On this forum, what will happen after the beta period?

  I was wondering what will happen on this forum after the beta period. I think that there are a number of options:
  -the forum will be deleted or at least is more accessible for participants of the beta
  -the forum will stay for a longer period of time, perhaps unalterable, but remains limited to the participants of the beta product and management
  -the forum is open to the public, read-only or read / write
  
  What happens on the forum may be long term help people decide what and how they post here.
  
  Thank you

  Hi, Wilfred,

  Excellent question. If we continue to make great questions in the forum like this, we can (and probably) turn this into a public forum with all the threads of discussion held. We will probably remove the beta announcements and also remove/modify entries that are specific to beta, but keep the rest for future participants to take advantage.

  This is all the more reason to keep this forum for discussions, questions, exchange of ideas and comments.

  Thank you

  Joe Huang

• Import and view the files on a memory card from your USB connected printer (Windows 8)

  Hello everyone

  Have you ever wondered if there was a way to access the files on a memory card in the printer to your computer? Is there. Here's a video that shows how import or view the files on a memory card in the printer of Windows 8 if the printer is connected via USB.

  This video shows you how to import and display the files and images in Windows 8 on your computer, when you insert a memory card into your USB connected printer.

  I hope that aid video above.

  This is especially useful if you do not have a computer with a memory card reading and you need to retrieve an image from a memory card.

• The file contained a virus and was deleted

  Hello

  I get the message

  the file contained a virus and was deleted

  This occurs in Internet Explorer, chrome, and Firefox (in Firefox I fixed it by going to about: Config), it started with the virus antivirus system care, which I removed, I did tests, which does not.

  Disable the warning?

  Thank you

  I did all the steps in this entire thread and no solution (good ideas, but no solution). I believe that this error message "the file contains a virus' on all downloads came from a virus on a web page (this is what I saw in my case).  When IE downloads a file, it shows he has a virus, but it's really not analyzed.  I got this message even after I've completely removed McAfee and after I reinstalled completely IE10.  It's a redirect using the points of analysis that the virus must have created.    To resolve this problem, I went to C:\ and made a random generator DIR command  He showed c:\program files\windows defender had these reparse points.  When I looked for download the latest Windows Defender, says MSFT site is no longer used on Windows 7 64 bit so I deleted the subdirectory 'C:\program files\Windows Defender' and all of its subfolders and restarted.  Problem disappeared.  McAfee and MSFT Security Essentials scans do not have that automatically remove.  Hope that helps.

• Is it possible to get the files for windows vista, so I can reinstall my system?

  Hello

  Im a user of linux on one machine HP Pavilion dv5-1095eo leisure. IM tired to restart my machine to run a windows OS, so is possible for me to get the files for windows vista. I got the windows key attached under the computer and I don't have any windows CD when I brought the machine.

  Hello:

  You can do your own installation disc Vista too if you wish.

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• When running defrag, error "MMC cannot open the file c:\WINDOWS\system\dfrg.msc.

  When I run the defrag I get a message that says "MMC cannot open the file c:\WINDOWS\system\dfrg.msc. It is perhaps because the file does not exist, is not the MMC, or was created by a later version of MMC.

  Hello

  I tried the steps before I posted my question, but it did not work. However, I downloaded SP3 again and it seems to work now.
  Thank you

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• on my office shows... Could not load or run ' C:/Docume/user/locals/temp/csrss.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  on my office shows... Could not load or run ' C:/Docume/user/locals/temp/csrss.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  Hello

  · Were there any changes made on the computer before the show?

  I suggest you to run the audit files system analyses on the computer. You can check the link for the procedure: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  Adding to it, I suggest to run online virus scan and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Could not load or run 'pythizer.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  I get this error "could not load or run 'pythizer.exe' specified in the registry." Make sure that the file exists on your computer or remove the reference to it in the registry. Whenever I turn on my computer. I found and deleted the file, but this error keeps coming back. HELP ME PLEASE!

  The Startup tab looks like the registry.
   
  Try this utility that searches in less common places
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx?ppud=4
   
  Maybe another program trying to start pythizer.exe that is not a
  message we get from booted windows of programs.
  --
  ..
  --
  "Jonny G" wrote in message news: 2a8f4e05-44-cf-480C-8056-7e895939c845...
  > No go I'm afraid. Doesn't seem to be in the start menu. Is there a way
  > watch the "registry"?
   
   

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• I did the update of windows, and there was a lot of mistakes. I then tried to restart the system, and it is said that acro32.exe is it prevents to close?

  Original title: acro32.exe

  I did the update of windows, and there was a lot of mistakes. I then tried to restart the system, and it is said that acro32.exe is he keep awake. What is and how to fix it?

  If you really see a message about "acro32.exe" is probably malware you should scan your computer with the virus eset online scanner and then download, update and run the free version of MalwareBytes AntiMalware.

  If, as is most likely, the message concerns AcroRd32.exe, the main executable file of Adobe Reader.  Go to control panel > programs and features and uninstall Adobe Reader.  If you have problems uninstalling Adobe Reader, see--> http://labs.adobe.com/downloads/acrobatcleaner.html

  Assuming that things patches, install Foxit Reader (free) instead--> http://www.foxitsoftware.com/Secure_PDF_Reader/

  Or, if you really want Adobe Reader back, go here--> https://get.adobe.com/reader/ (remember to uncheck the box to install McAfee Security Scan or any other 'add-on free")