The food is just out on my Power Mac G5 2 .3GHz so it does not start. My question is, if I pick up another opportunity G5 2 .3GHz and install the HDD of my G5 will be a new start up as usual.
The power just went out on my Power Mac G5 2 .3GHz and will no longer start up. My question is this. If I pick up another opportunity G5 2 .3GHz and install the hard drive of my computer it starts as usual? I just need to get the files on my computer.
J.
Yes, if the disk was not damaged.
Tags: Mac
Similar Questions
-
With or without the adapter is connected to the computer (well known socket), the computer will not turn on. The LED located on the left side of the computer where the socket is attached blinks 3 times (white), but does not supply power to the top. Another post I saw said "continuous" flashing would be the power adapter, but wanted to ensure that it is in fact the problem before buying a new... Any help would be great!
Hi @joshuaj21,
Welcome to the HP Forum!
It's a great place to find answers and advice! You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums: first time here? Learn how to publish and more
I understand that the computer will not turn on. However, when you connect the AC adapter of the power port light flashes 3 times. Please check that the power cord is not one of the recall. HP laptop AC Power Cord Safety retirement program and replacement announced August 26, 2014 . You use a power bar? Have you tried a different outlet? Here is a link to the HP laptops - tests and using the AC adapter which can also help.
Please let me know the results.
Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos. : catvery-happy
-
Inspiron 560 does not start after the new mobo
just relpaced mobo with nine years of old stock that it does not start in windows 7, just goes into repair options, but will not repair.
He's trying to start windows, it happens from windows, you see the glance just color logo on the screen, then it restarts.
Yes, it's the same model mobo.
TIA.
Check the operating mode SATA for disks - it must be about the same as it was before the jury was replaced (AHCI, RAID, etc.).
F2 at startup to check.
-
I just upgraded to window 7 for windows 10. 6 Lightroom does not start because it cannot open the catalog or one of my backups
Yes, once the user account is the upgrade to windows 10 have permission on the folder of photo issue, which prevents the Lightroom to create the necessary temp file when the catalog is launched.
This is the reason why I asked to copy the catalog file to another location to narrow down the reason for the problem.
Thank you
-
Hello.
I just know that the muse and I need guests alphabetical organization. The problem is that you will always get new clients. I need to know how to insert a new customer (square), and it is already in alphabetical order on the page. The site will be as in the link below, and each customer will have a window of these: http://www.connary.com/. I look back.
A hug, Murilo.
I believe you are referring to the rectangles of tile as visitors on the page? not exactly customer database?
You can add rectangle with different effects with rollover State of mouse and about adding new, you must do this manually in design mode.
Thank you
Sanjit
-
I installed the new RAM on my desktop Compaq EVO D500. Everything was working fine until 2 GB. When I tried to install no matter what the computer does not start. Specifications of the computer say maximum RAM is 3 GB. All the memory and are good because I swapped taken in all the combinations possible and memory. Any ideas. gknapp_ny
If their were any memory related settings that had to be changed I would have no idea how do. I had initially 512 MB of RAM (256-2 sticks). I added a stick of 1 GB aditional third availabel taking and all went well. Then I had two more identical 1 GB sticks and added them one at a time. With 2 GB without problem. But with the third stick of 1 GB that I couldn't start - I just beeps. I swapped one of the sticks of 1 GB for an old 256 MB and still no start just beeps. When I run 2 GB everything is fine. The BIOS recognizes the 2 GB of RAM. gknapp_ny
Sounds as if your BIOS will not identify no matter what says the spec, 3 GB.
It seems as if you may need a BIOS update in order to recognize the 3 GB of RAM - especially if it is a very old Compaq Evo D500. See the "Improvements" tab to the page linked below.
Note that the patch on the link above is for models Evo D500 "with a ROM family 686Y2." Read the "Release Notes" on this page to determine if your machine is one of those and if so, see "Instructions of Installation" to install the upgrade. If your D500 is a laptop, you should Flash the ROM ONLY (i.e., update the BIOS level) when the computer is plugged - loss of power during this process can potentially cause irreparable harm to the computer.
-
BlackBerry 8250 new smartphones does not start with the connected SIM card
I'm having a problem with my new Blackberry of Virgin Media (mobile). I just got it and when I have a connected SIM card I only get the loading screen timer and the blackberry does not start. If I have no connected SIM card the device starts in the operating system, but was told that there is just no SIM connected (obviously). Once I put the SIM card in again once it is stuck on the loading screen. As you probably already figured out that I did many resets hard with the battery pull and it has not solved the problem. A consultant because it would be greatly appreciated because the only advise I got support was remove the boot of sim and put it back and start again duh!
Carrier - Virgin Media / Vodafone
Model - 8520
Version of the OS - 4.6.1
Free space - 130679088 bytesBT device - I have the details as HDW - 22736-002 Rev 1 Ver 2 4509 (is that correct?)
Apps & free space - nothing installed new device installation is not complete.
Blackberry 4.6.1 Basic application
Basque 4.6.1
Galician 4.6.1
softwqare system BlackBerry 4.6.1
1.0.1.20 Application Center
Attachment Service 4.6.1
4.6.1 cards
Messenger 4.6.0
BrickBreaker 4.6.1
browser 4.6.1
documents to go 1.003.018
configuration of e-mail application 4.6.1
help 4.6.1
Klondike 1.4.8
4.6.1 Memopad
password keeper 4.6.1
Phone 4.6.1
Sudoku 1.0.11
4.6.1 tasks
King of hold'em Texas 2.3.0
Word Mole 4.6.11 is the news provider's SIM card?
Old to another device?
2. do not place you a memory card in the camera?
New media card?
or from another device? What device?
-
I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?
Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:
I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?
I would like to point out something that you may not realize: Windows 8
has two interfaces; the modern/Metro Interface (which may be all the)
you have looked at) and the traditional desktop Interface. You can use
one or both. This traditional desktop Interface is almost
identical to the interface of Windows 7. the biggest difference is that
There is no Orb start clicking to bring up the start menu.But note that you can get the ORB start by using one of the many
third-party programs, are free or very cheap (the classic interface
http://classicshell.sourceforge.NET/ and debut8 to
http://www.stardock.com/products/start8/; my personal preference is
Debut8, but they are both very good). And goes from an interface to
the other is very easy; There are several ways, but simply by pressing
the Windows key is perhaps the easiest.Just install one of these two and using the traditional desktop computer
interface may be a better choice for you than going to Windows 7.
I use Windows 8, almost exclusively with traditional workstations
the interface and with 8 Start installed. If you were to look at and use
my computer, you may have a hard time realizing that it is not
Windows 7.
I also recommend to read "how to make Windows 8 or 8.1 watch and.
Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
I can't address the issue with your games, except to say that
whenever you move to a new version of the operating system, some of
which is used to run on the former does not work on the new. And it's
much more likely with utilities and games with companies
applications. -
Qosmio X 500 does not start and the power LED is flashing every 5 seconds
Hello
I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.
I tried to:
* Remove battery and power up with AC only
* power only to batteries
* remove the battery power button hold for 30 seconds and over power with AC, battery only athenbut it did not help.
I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.
No idea where could be the problem?
Thanks for help
FrantisekHello
The failure of RAM could be the reason for this behavior of the laptop.
Remove the RAM modules with good modules tested and check the functionality of the laptop.
In the case of RAM isn t the troublemaker, the motherboard could be affected.Good luck and share your experience with us.
-
Satellite 1800-814 does not start if the power adapter is plugged
Hello
I have a problem with my 3 year old, 1800-814.
It all started with the sudden Windows crashes. He ran sometimes smooth, sometimes he just hung up. So I decided to reinstall the laptop. My problem is when it is plugged by pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 seconds. On battery it starts every time. What can I do? A defect material or just dust somewhere?Thank you
Jens Grieger
Hello
It could also be something wrong with the electronic power supply on the motherboard.
It s is not possible for the user to fix it. In such cases, the best way is to contact Toshiba service in your country. -
Satellite Pro 460 does not start with the new drive in
I recently received a Satellite Pro 460, but he had no hard drive.
It starts great without a disc in but as soon as I put a new hard drive in it does not start.I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.
Someone has any ideas why this is and what I can do about it
I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.
What HARD drive you are trying to use on this good old classic?
-
Why Satellite Pro A300 does not start when you press the power button?
Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.
In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.What should I do to get a normal departure procedure?
When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.
When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
The same thing happen on my Satellite A300. -
Tecra M2 does not start - the power light AC blinking orange
Someone at - it a list of codes for the Tecra M2 flash.
My friend has a laptop that does not start at the top. the AC power LED flashes orange. a long, short, long, short, long, short, long, short.I checked the battery and reinstall the RAM.
Any IDE?Hello
I agree with go.
The ASP would be able to tell what means error.Usually means short and 1 long: 0
So the error must be: 1010 1010
Due to the last significant bit (LSB), to be read by behind:
So it now means: * 0101 0101 binary *-> it must be converted to hexadecimal-> * 55 Hex *.Then, you will get a hex code.
But unfortunately, I m not very well which could mean this codeSo ask ASP for help!
-
After the new HARD drive does not start installation Qosmio G15
I just got this G15 last week and one of the hard drives was bad. Put it in a new Bay 2 and it does not start. I took it back and it starts fine. I even changed the main hard drive Bay 2 HD and it starts up fine with a hard drive. It's something to do with the scores, I think. Any help appreciated.
Hello
I think that the boot order has been the bad HARD drive in the BIOS.
At the new disk you do not installed any OS, and in my opinion, this is a reason for starting problems.
Simply access the BIOS and change the boot order -
C870-19(r) satellite does not start with the new SSD
Hello
I will update the Toshiba Satellite C870 19(r) with a Pro 840 Samsung SSD, but it does not start.
He said: not found system.
Post edited by: joch333n
None found system means that there is no system installed on the SSD drive...
What you trying to do?
You start from a disk in order to install the new system?In this case, you should disable startup secure in the BIOS.
I also recommend moving from UEFI mode MSC!
Maybe you are looking for
-
Mailto works only not in version 12
Firefox will not open mailto links in a new window as he did... He just open gmail in the current tab. I recently upgraded to firefox and now whenever I click on a mailto link, it opens gmail in the current tab in a new window. How can I open e-mail
-
I have a MacBook Air 2010 with El Capitan 10.13.3 version I can't open the 'Contacts' in my HD "...". because it's in a time Machine to the top. "(How hell, then, do it out of time Machine?)
-
Equium M50 will not recognize the LAN port - error: disconnected network cable
I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller. I used to connect through a Modem/DSL switch "ADDON" and had no problems. I then replaced the ADDON with an ADSL Modem/Router "NETGEAR" DG834G
-
How we prevent double scale Microsoft graph/numbers/time
I have a XY Chart, where I draw the values against time. To declutter the X-scale, I chose to hide seconds (only the hours and minutes are displayed). Now, it seems that there are numbers duplicated on the X-scale (marked in red). I tried to adjust s
-
OfficeJet Pro 6830 e: Message 'there is a problem with the printhead"
How can I fix there is a problem with the print head.