The Gains of the PID VI Installer

Hey guys,.

I am trying to learn to use the PID VI in LabVIEW and programmed a simple VI. Here's the problem: the output of the PID VI seems only related to the Kc in the program and the other two values (Ti and Td) do not affect the output, for example ranging from 0.001 to 1000.

Is that all that I missed when programming?

Thank you very much.

Yes, of course, you can use a loop on the cRIO - you must use a loop if you want your code to be executed more than once.  Make sure you put everything that should happen several times (for example, the function and control of front that you update while the code is running in the development environment) inside the loop.  New LabVIEW users often put out of the loop and wonder then why they are only read once and never update again even if the code is still ongoing.

Tags: NI Software

Similar Questions

  • Cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.

    I'm trying to install Adobe Creative Suite 2 Premium on my MacBook Pro (OS X El Capitan).  When I click on the install icon, I get the following message: cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.  Can I do to solve this problem?

    Try to install mode without failure. Hold the SHIFT key while rebooting.

  • V14 said that my droid2global is not compatible, but the beta installs fine, how is the official download installs?

    V14 said that my droid2global is not compatible, but the beta installs fine, how is the official download installs?

    I can see and download it now from the game of Google. crocadileut can you check again?

  • Why can't save my new 6 s of a 5 on the cloud without setup assistant, phone was at the verizon store installation.

    Why can't save my new 6 s of a 5 on the cloud without setup assistant, phone was at the verizon store installation.

    This error message do you receive? is a new feature in iOS 9.3.1?

  • Satellite M60 and the display driver installation

    Help people to the display driver "installation cannot continue because the size of the specified directory path and the name of the installation folder exceeds 88 characters.
    Shorten one or both of the limit specified below and try again"! that to me?

    Hello!

    This looks like your username to long and the path of files extracted more than 88 characters.
    I think you should change your username or try with another account to update the driver, for example the admin account.

    If it doesn't work try to download the driver again.

    I hope this works, but you can give us feedback, what's going on.

    Good bye

  • Qosmio X 70-A - need help with the recovery image installation

    OK, so I recently bought a new laptop (Qosmio X 70 - A) which came with pre-installed Windows 8.1.
    First thing I did was to make a backup of the system, all good and beautiful image... installed a program for a better partition the HARD drive and the program dirty windows. It would not start (a blue screen appeared with the error 0 x 80070035).

    Searched the web for solutions and managed to repair using a recovery media, but the laptop was moving to slow down, the best thing that I thought was a restore with the system that I've done before image.

    I put the image on a blu - ray player and entered the recovery media, troubleshooting, advanced option, image system restore, choose the blu - ray and he went for one minute after this error appeared 0x8078002c and my HD is completely erased...

    Please help me
    Laptop did not come with any dvd/cd etc.
    I don't know the serial number of Windows (there is no sticker on the laptop with the sticker).

    Generally the recovery image installation should not be problematic.
    A few months ago I ve installed Win8 recovery image on friends laptop U940.
    If I m remembering well, I just choose recovery image installation (out-of-box) and the recovery image has been successfully installed.

    There was no some don't troubleshoot option.
    Start your laptop and press F12 to get into the boot menu. Put recovery media in the optical disc drive, choose the CD/DVD/BD drive in the menu and press ENTER.

    Just follow the on-screen menu and choose recovery image installation (State out-of-box).

  • The PID control

    Hello world.

    I wrote a program of temperature control in labview and used the PID Toolkit for it.

    The entrance to the PID is the measured temperature and the output is a PWM signal fed to a relay that turns heater on or off.

    The control works but I want the temperature to be stable within a range of + - 2%.

    Currently, the temperature varies more than that.

    IAM sure, this is the setting of the PID.

    Because I have not worked with regulators PID Iam not exactly how to tune my system.

    The best way I found is to zero I and D and make the system oscillate with P.

    The only problem is that the system of temperature is so slow that it takes quite a long time to reach the set point which in turn would mean a lot of hours of tests only.

    Now Iam just wondering if there is a faster way to set the PID controller?

    Thanks in advance,

    Best regards

    Michael

    I've used this method several times with slow heating appliances. It can take a long time to reach a stable temperature, but at least do not monitor constantly as he approaches this value.

    In figure 3.4, Yes, the Min value is the initial value that is stable. It is OK to start an initial PWM output of 0, which speeds up the process, if your radiator is already at a steady temperature (the temperature in the room).

    In general, the difference between the output of the first and the last values, better will be your control (you will get best results of going from 0 to more than 50% to 5%), but it will take more time to settle to a new value and of course you must ensure that you do not exceed the capabilities of your system. It's a good idea to have a separate alarm system in place that can cut power to heater if you exceed a temperature, especially if you plan to walk away from it until it stabilizes.

    To a fixed cycle, the system will not continue to heat up indefinitely unless you have a perfect insulation without heat loss - but, as I mentioned above, do not choose a value that will not cause the system to overheat.

  • How can I connect PC to the PID block when there is no block to HAVE?

    Hi, I've just started using NOR-FBUS (NI USB-8486 with Configurator OR 4.1)

    for my device configuration, there is only block AO, tuberculosis, RB and PID.

    Question 1.

    Can I manually set SP in the Configurator? If so, can you please tell me how?

    Questino 2.

    I tried to follow the tutorial in the manual, but I did not block of I... so how can I

    wire of my SP to the PID block?

    Much appreciated,

    Thank you

    Hello

    Have Weiwei VALUE should follow the change in TB after adjustment. But you couldn't change it manually.

    Here, I've prepared a PPT on how to create a PID loop.

    FOR INFO.

    Good luck.

  • Why the labwindows/cvi Installer runs whenever I try to start labview 7.1, after I installed N!-series?

    Why the labwindows/cvi Installer runs whenever I try to start labview 7.1, after I installed N!-series?  The installation program runs 3 times now and asks me to restart every time.  Then I reboot and it happens all over again when I try to start labview 7.1, unless I select Cancel 3 times in a row then labview starts.

    Thank you once again.  I am running.

    Barry-AIC

  • ProBook G1 430: Encrypted hard drive and the corrupt Windows Installation

    My laptop has an encrypted disc using HP drive encryption.  Recently, the Windows installation has become corrupted and I could not repair the installation using floppy disks to install Windows because they cannot access the encrypted drive, nor can they be accessed by other facilities of Windows if I plug in the external drive.  The two methods see the Windows partition as a RAW format.  I guess it's only because the partition is encrypted and has no way to determine the actual format type.

    I searched around to find clues as to how I could get past the encryption, but without success.  The computer is no longer under warranty, so I'm looking for options that will allow me to have access to the data.  The methods I've read all required the computer under warranty.

    I can still go through the encryption after the computer starts, but Windows Setup gives an error and tells me that I must use an installation disk to fix.  I have attached a picture of the screen of the error.

    I'd appreciate any help anyone could provide to solve this problem.

    After much patience and time on the phone with HP, I finally able to return the encrypted Windows installation.  They gave me a copy of the WinPE environment was a software that allows you to decrypt a partition which was encrypted with their software and execute commands Windows on it.  I then ran the repair bootbcd order and I was able to get Windows to start.  To obtain this software, my case should be escalated to tier 2 support.

  • Reset the PID.vi only once on the State transition

    Hello

    I'm controlling a fatigue gear using LabVIEW test bed and I use the PID.vi to control the hydraulic circuit. During the transition from the start as a test State, I need once the PID (the integrated error) values to be reset during the transition. The current configuration constantly resets the PID causing the hydraulic output voltage to be lower than the set value. I can't understand how to be set to Boolean false to pass true during the transition from the State and then back to false to prevent resets of the other by default. I have attached the current revision of my code.

    Thank you very much for your help!

    Trace

    It's a good idea, but it is not necessary to select blocks with the true and false as inputs, just equality by different and use the output directly to reset.

    Also, I see that you have PID blocks in two separate cases. Note that those will act independently from each other - if you reset into a State, then move to another State, it will not be reset. Maybe it's what you want, and maybe it isn't, but be sure to put multiple instances of the PID block that control the same in different cases. You can also see weird integral questions when you place in case, if a long time share when you run the same instance.

  • For the PID variable time interval

    Hello world

    I measure the ph and control the flow of co2, so I decided to use the useful PID screw like I do for my temperature control.

    the difference and so my question is, I have not want (/ power) to run the PID in a timed loop, in fact my intervals of measurement (eg. every 30 seconds ~ or ~ 60) may vary in the second range, because of the way I acquire data and how I put the valve in co2.

    so my question is: is this a without problem?

    I'm not sure weather the internal timer or providing the dt will explicitly be responsible for this?

    (and I can't test it on atm equipment)

    thx for your time

    Shouldn't be a problem. Don't wire dt, let the PID to use its internal clock. Could make it more difficult to tune the PID, since you will have to account for the worst cases (longer delays between updates).

  • Cannot find the script of Installation of NOR-KAL check

    Hello

    I'm prompts to install the driver of Base of NIDAQmx. I got the following error: could not find the script of Installation of NOR-KAL check. Abandoned facility.

    Could you please help me with this.

    Thank you.

    ---

    C

    Hello Temp_Var,

    What version of DAQmx Base you trying to install? What operating system (including version number) you are trying to install DAQmx Base in?

    You can try to install NOR-KAL separately, following the instructions in the Readme of NOR-KAL. The latest version of NOR-KAL can be found here.

  • An unexpected error occurred during the generation of the Volume License Installer

    I'm building a Volume of NI Developer Suite 2016 DS1 License Installer.  I created the master suite and the installer from the DVD device drivers successfully.

    However, when I try to create tools Xilinx DVD separated issued with the Game Developer on I get the error "an unexpected error occurred during the generation of the Volume License Installer '.

    There is no other information.

    Nobody knows what is this 'unexpected error' and how to work around.

    Just worked it out.  The DVD contains 2 sets of tools; 14.7 & 2014.4.  You must come down with each of them separately, you can't just select the top-level of the DVD folder as you do with all the other discs in the package.  Would be useful if the error to a little more explicit.

  • Find RT module in the list of installation for LV2009

    8.6.1 to LabVIEW 2009, release August update.  LabVIEW 9.0 and most modules installed well.  I can't find cRIO RT module in the list of installation.  MAX indicates that I have NEITHER-RIO 3.0.0 w/SE support installed on the target, but the option of time real LV 9.0 is missing LV 1.0.0.3, VxW 6.0 RT, RT LV, LV RT VxW 9.0 9.0 and Base System 9.0.  When I take the LV RT Deployment Option, it does not install.

    Yes, but just to be clear, that the RT module don't settle, while I was looking for a separate RTW for the cRIO module, because the installation instructions are referring to one under an integrated case.

    The real problem solved now, is that the RT module don't settle not until I manually uninstalled the serial number OR old and then installed the new using LabVIEW 2009.  During the first attempt to install LabVIEW 2009, the package wizard detected the old NI Serial and told me that he was unable to install the new NI Serial until I uninstalled the old, but it gave me the opportunity to defer this step, I did.

    Thank you for your help.

Maybe you are looking for