Similar Questions

• The getBuiltInScopes method was not found.

  I have an application that worked for a while. I made no changes to the code since the last time that I used it. Basically, the code creates a zip file with an entry for a causal relationship. I used it in March this year it worked fine. I have been assured by the Govt. DBAs and system administrators that nothing has changed, but I still get the error attached. Any ideas?    I just learned from a friend who knows CF, it might be a problem of version.  I am running 8 and I think it runs 10.   If it is a question, is the solution somewhere on this site?   I do a minimum CF and am at a loss.   The function that throws the error is when a button is clicked, a javascript routine is run that combines all requirements files to the zip file.   Yesterday, another application started up the error.  I haven't lived the code again, but it is another button that is clicked, and I am sure, another javascript error.

  getBultInScopes() is a procedure of ColdFusion 8... getCFScopes() is the current call.   My problem was, there was a special debugging module that got the call and I couldn't find anywhere else.  Finally updated my Production Application.cfc and found a call to getBuiltInScopes(), it was not in the module, I had.   Did observe that article and the error disappeared.  Thank you all for your help.

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• Error code 0 x 80070035 that the network path was not found.

  OT: error code 0 x 80070035
  My wife and I have 3 computers all running Win 7 64 bit. Two jobs and the third is a laptop. My desktop or laptop computer I can access any folder of each machine. However, when I try to click on my wife under 'Network' computer I get the message "Windows cannot access\\wife_desktop." When I click 'See details' it displays "error code 0 x 80070035. The network path was not found. "I'm running out of things to try.  I tried to use my desktop computer and notebook to help me check the installation on my wife's computer. I have updated owner and security settings in both car and system, as well as temporarily disable the firewall. Any suggestions would be greatly appreciated.

  Hello

  Method 1: Run the network troubleshooter and check out what he has to say.

  See the links below:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters
  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Make sure network discovery is enabled on the laptop computer, by default the State network discovery is disabled. If network discovery is off, please take the following steps to turn on.

  (a) click Start.
  (b) click on Control Panel.
  (c) click on network and sharing Center.
  (d) click on the arrow to drop down next to the network discovery.
  (e) click on the option, turn on network discovery.
  (f) click on apply.
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Method 2: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off 
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  See the following link: http://social.technet.microsoft.com/Forums/nb-NO/w7itpronetworking/thread/028a3d13-f571-49e0-abe7-1ca61fb92082

• DDL required for the complete installation was not found. Error 1603. What should do?

  DDL required for the complete installation was not found. Error 1603. What should do? A link where to download the required DLL? Kindly help please.

  I tried everything, but received the same message. Attached to the screenshot.

  

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• When I try to install the program on uniblue power I get an error message that the mia.lib was not found.

  When I try to install any programs, I receive the error message that the mia.lib was not found. What should I do to correct this?

  Hello
  Yes, it seems that this program is not running Windows XP. If the requirements for this program is Windows Vista or Windows 7, then the upgrade may solve your problem.

  I hope this helps. Just reply to the results.

• Error code: 0 x 80070035 the network path was not found.

  Hi all

  I have 2 systems. In one system, I installed Windows XP Pro SP2 and in another machine I installed Windows Vista Home Basic Edition. The two systems are networked. I am able to access and view the shared folder in Vista the XP system. But when I am trying to access folders in XP since Vista I get the below error:
  Windows cannot access \\hyd02
  Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.
  Error code: 0 x 80070035 the network path was not found.
  
  
  I did the settings below:
  (1) file and printer sharing are enabled in both systems.
  (2) firewall is disabled in the systems.
  (3) in the center of security and network, the network is private.
  and network discovery is enabled, file sharing is enabled, public folder sharing is turned on, printer sharing are enabled and protected by password sharing is
  Off, media sharing turned OFF.
  (4) the name of the task force in both the system is the same.
  Can someone help me solve this error...
  Thank you
  Sylvie G

  Hi Sylvie G

  Thanks for posting on Microsoft Answers.

  Are the same username and password on both systems?
  What is the share name you are trying to do on the XP machine?
  Let's say that the share name is music, you would get to it by typing \\hyd02\music

  Can you do a Test PING since the Vista PC on the XP PC?
  Go to a command prompt and type ping followed by the IP address of the computer XP

  Please post back the results... Thank you Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• network error 0 x 80070035 that the network path was not found.

  I have problem of network with Win7 pro. When I click on my network folder links to my LAN I geterror 0 x 80070035 the network path was not found.

  The network has been set up for 4 months, it includes 3 PC, so far the only problems have been minor, such that the network links, which restart a system endangered has been necessary to update the network and worked.

  The 2 other PC can see and access each other and see and access PC Win7 Pro troubled, but troubled PC Win7 Pro can even happen to its own network without theerror records 0 x 80070035 the network path is not found, arise.

  After hours of checking, I have found no resolution, but as I restored it the PC several times, sometimes service reappearing for a while.
  In my search for possible causes, I opened the Device Manager with the selected hidden devices, under network adapters and found189 instances of card Microsoft 6to4.
  I don't have 3 PC's networked! Anyone know if it is a normal number for Win7 or I found part of an anomaly.

  Any suggestions?

  c.Maresca

  Thank you for your comments.

  In the search for a solution to my problem of network Win7 Pro, that I've been on all the settings you mentioned before that I posted my question and no problem, everything is as it is necessary to have a comprehensive network and the network was very good except the occasional missing links, which I described in my original post. The only addition to the configuration of PC from the network has been initially implemented has been automatic updates to update from Ms.

  The good news is that, as I studied it to the maximum, I found 2 messages in the network forum Win7 which combined provided the solution for my problem with the network.

  As I did research on it, I noticed that a lot of people have similar problems of network. I know that there are many reasons of connectivity issues, as well as the solutions are specific problems, but if other users of the network are affected by the problem of multiple card Microsoft 6to4 and local network error 0 x 80070035 that the network path is not found, the solution I found worked for me.

  If you want to see more respond to this stream.

  c.Maresca

• When you try to access an external drive shared by MAC from Windows, I get an error Code: 0 x 80070035 - the network path was not found

  Original title:

  I'm unable to access an external drive that I have connected to a mac on my home network.  I can access all the files on the mac itself, but when I try to connect to the external drive, windows 7 gives the error Code: 0 x 80070035 - the network path was not found.  The external drive is set to share on the Mac, but Windows 7 always gives me error.

  Hi Comicsancturn,

  Follow the troubleshooting steps in this thread to solve the error 0 x 80070035.

  Let us know if that helps.

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• An error occored while reconnecting to Z: at \\BRENLEEBOLIN\Public. Microsoft Windows network: the network path was not found. This connection has not been restored,

  A can not access my respect (z), on my Microsoft Windows network, the network path is not found, the connection has not been restored.

  The PC called BrenLeeBolin is actually shot?  It is physically on the network?  Can you go to the BrenLeeBolin PC and see if the Z:\ drive is actually still there and readable / write?

• error message saying "error loading wingsw32.rom the specific module was not found" whenever I boot my system

  wingsw32. ROM

  I get an error saying "error loading wingsw32.rom the specific module is not found" whenever I boot my system.

  Can someone help me in this.

  Thanks in advance!

  ·                                You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner