the goal even after repair
I recently bought a refurbished rebel t5 with the kit lens 18-55mm, as well as the 10-18 mm IS and 55-250 IS lens. Everything has been fine with all my equipment except for the 18-55 mm lens. When the rotation of the lens to zoom in or out, there was a notieable rubbing or grinding noise and there were a few sticking points where the goal was not spin smoothly. I took in a Canon customer service center and they we sent for repair. I am the home goal today and everything is exactly the same thing when I sent it. Same grinding noise, even the sticking points. The service details, bak I say "your product has been examinded and it was found that the party was out of position, causing noises occur. The part of the description says "Focusing ASSY YG2-2353-000 part number".
I have also two older lenses that I had with the original Canon EOS rebel, I have a 18-55 and 75-300. So none of my other 4 lenses have this problem, but I don't know how many questions it's really. This could potentially damage the lens over time? Or is that what I should really worry? It isn't really the effect on my shot, but I don't want to be slowly causing damage every time that I have to zoom in or out. Since he was sent back to me like that after repair, should I just assume that it is not a big deal, because the repair obiously Center don't think it was if they sent back like that?
Thanks for any comments,
Matt
Matt,
I don't have this particular goal, but I've been involved with a lot of people what to do. «It is not really effect my shooting,...» ", seems to be like that. The lens can jump gear fairly easily. You can reset it by deleting and expanding the focus and zoom all the way, both ways. You can hear a few clicks. Be gentle. It's really not a good candidate for the repair, if it is under warranty.
Using it, he can't last forever or not. If not, buy the new improved version. The Canon EF - S 18-55mm f/3.5-5.6 IS lens STM or elsewhere, far, the best choice for Canon EF - S 17-55mm f/2.8 IS USM Lens.
Tags: Canon Camera
Similar Questions
-
do not proceed with the installation even after restart of firefox add-ons
Add-ons - do not proceed with the installation even after restarting firefox, I deleted the files of 3 extensions (several times) in the other suggestions and rebooted. Still don't work yet saying will be installed when you restart.
This has happened
Each time Firefox opened
== after update to 3.5 and continued to 3.6.3
Hey even once, I did a complete uninstall and reinstall Firefox and it fixed the problem for me.
-
Outlook Express keeps coming out of the emails in the Outbox even after sending emails to friendsthen continues to send emails over and over again.
This occurs even after the email was deleated from Outbox. So that the people that I send to obtain email 20 - 30 times instead of only once.
Can someone help me solve this problem? I have Microsoft XP Professional on my computer. Thank you.
A common cause of this is to have your program configured antivirus to analyze the messages, including outgoing mail. If you can completely uninstall the AV program, and then reinstall it without the analysis feature mail. If you can't do that, turn off scanning messages. You will be just as safe.
-
Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!
Hi julesmom,
Please reset the Bridge preferences and then try it.
Measures
Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.
Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.
Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS
Let us know if it works.
Kind regards
~ Mohit
-
Folio is displayed on the device even after deletion
Hello
I have something strange happening on my device. Even after you remove a folio of InDesign or the producer of Folio it still shows on my device. It happens on both an iPhone and an iPad.
I use a Mac ESES CS5.5.
Thank you
On the iPhone, you must pass the folio in the library to display the button of the Archive. This is the same technique used to remove any item downloaded as a podcast.
-
Unable to connect to the router (even after reset)
I'm really frustrated, and I hope that this community can provide an answer. After all the hype around this router, it is he who gave me the most trouble.
About a month and a half... completely randomly it seems to me, I could not connect to the router more. Not through intellectual property, routerlogin.net/com...nothing. It just says: cannot display the page. I did everything I could possibly think, tried all of the suggestions I could find here and elsewhere and still nothing would work.
I finally did a hard reset and obviously lost all my settings... and RIGHT AFTER the hard reset after upgrading the firmware, I can't connect to the router again. This could be the cause? Is there a way around it?
The router worked fine until about a month and half ago. Then I stopped being able to connect to the admin page. Several resets hard did nothing.
I ended up RMA'ing it and the new replacement works fine (for now).
-
Eusing Registry Cleaner find same invalid key each scan even after repair.
Here are the keys that are not valid:
OK so I have a problem with my registry, when I use Eusing Free Registry Cleaner software he always finds the word registry keys and another key to windows as not valid, the problem is that are the infected with a virus or something? If not, is there a way I can set the keys, because when I click Repair on the program he always appears after a new analysis? Please help me as soon as possible. Thank you!Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-1033-80-DESK\Models\1033\L1033\ # %windir%\Speech\Engines\SR\en-US\L1033
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-1033-80-DESK\Models\1033\L1033\AMs\AF031033 # %windir%\Speech\Engines\SR\en-US\af031033
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-1033-80-DESK\Models\1033\L1033\AMs\AI031033 # %windir%\Speech\Engines\SR\en-US\ai031033
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-1033-80-DESK\Models\1033\L1033\AMs\AM031033 # %windir%\Speech\Engines\SR\en-US\am031033
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-1033-80-DESK\Models\1033\L1033\LMs\Main\ # %windir%\Speech\Engines\SR\en-US\L1033
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-1033-80-DESK\Models\1033\L1033\LMs\Main\Pronunciation # %windir%\Speech\Engines\SR\en-US\p1033
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-1033-80-DESK\Models\1033\L1033\LMs\Main\Spelling # %windir%\Speech\Engines\SR\en-US\s1033
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-1033-80-DESK\Models\1033\L1033\LMs\Main\URL # %windir%\Speech\Engines\SR\en-US\u1033
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-1033-80-DESK\Models\1033\L1033\LMs\Main\HowDoI # %windir%\Speech\Engines\SR\en-US\t1033
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-2057-80-DESK\Models\2057\L2057\ # %windir%\Speech\Engines\SR\en-GB\L2057
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-2057-80-DESK\Models\2057\L2057\AMs\AF032057 # %windir%\Speech\Engines\SR\en-GB\af032057
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-2057-80-DESK\Models\2057\L2057\AMs\AI032057 # %windir%\Speech\Engines\SR\en-GB\ai032057
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-2057-80-DESK\Models\2057\L2057\AMs\AM032057 # %windir%\Speech\Engines\SR\en-GB\am032057
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-2057-80-DESK\Models\2057\L2057\LMs\Main\ # %windir%\Speech\Engines\SR\en-GB\L2057
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-2057-80-DESK\Models\2057\L2057\LMs\Main\Pronunciation # %windir%\Speech\Engines\SR\en-GB\p2057
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Speech\Recognizers\Tokens\MS-2057-80-DESK\Models\2057\L2057\LMs\Main\Spelling # %windir%\Speech\Engines\SR\en-GB\s2057
Invalid file or folder # HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\IME\China\imesc\Directories\InstallDir # %SystemRoot%\IME\IMESCthe # are here just for spaces.
Essentially if you used a registry cleaner and it has an undo feature you should use and uninstall the program. I not worry - or do whatever it is - on the registry entries found by a registry cleaner. Even if you have some additional registry entries, they will not affect how Windows XP/Vista/7 to perform a strand. MS - MVP - Elephant Boy computers - don't panic!
-
Finder keep it open the file even after I change the default folder
I have the problem with the default folder in the finder.
A few months ago, I changed the default folder from the finder to a specific folder. Now, I want to change to the new folder. I already go to finder > Preferences > General > new poster finder window and change the folder, but whenever I click on the finder on the dock for the first time, keep the change back to the old folder. What should I do with this?
Thank you for the help
HI there Alia80,
Looks like you set your Finder preferences to open a specific folder when you open a new window, but it seems to keep coming back to what it was previously set to. I would first start safe mode and if some system-level caches can be erased, and a check disk and repair is done automatically:
Try safe mode if your Mac does not end commissioning
Follow these steps to start in safe mode.
- Start or restart your Mac.
- As soon as you hear the startup tone, hold down the SHIFT key.
- Release the SHIFT key when you see the logo Apple appears on the screen.
After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.
To leave safe mode, restart your computer without pressing any keys during startup.
Once you log in safe mode, let him by making a normal restart and test the issue again.
If it persists after this test this point in a new admin on your computerand user let me know what is happening there:
OS X El Capitan: set up users on your Mac.
Thank you for using communities of Apple Support.
-
Qosmio G10 134: the screen freezes after repair
Hello
Earlier my Qosmio G10 had to be repaired because of the vertical-bars-in-screen-and-broke-down-videocard-problem. They gave me a new motherboard and Nvidia Go 6600 and the problem was solved. I hoped... Because then I couldn't not to use the graphics card for more than 5 minutes.
When I start playing a game, or so it takes 5, maybe 10 minutes in mind for my screen to freeze. Then precious is unresponsive to anything, even to the Microsoft-Magic-Combination-Ctrl-Alt-Del. very annoying to say the least... Does this sound familiar to anyone?
Thanks in advance,
Dave
The NetherlandsHello
I agree with the agramer. It is possible to s that you got different but better graphics card. On this page, I read that some users who repaired the laptop got a different card because the original of the delivered graphics card was off live.
In this case, you should check your device for details of the map Manager and if necessary, you must install the right graphics card driver.
-
Impossible to activate the widows xp after repair with another original drive is lost
have a laptop a toshiba tecra a3x for about 8 to 7, has lost the original disc, had to do a repair with another drive, now it says mDiagnostic report (1.9.0019.0):
-----------------------------------------
Given WGA-->
Validation status: invalid product key
Validation code: 8Code of Validation caching: n/a
Windows product key: *-* - BK84X - BP43D-VWWR3
The Windows Product Key hash: ktt7V6c0R/4KZ3vpSFWLdyO3tP4 =
Windows product ID: 76487-011-5308291-22820
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 5.1.2600.2.00010100.3.0.pro
ID: {290F85A5-6AA8-4114-AE1D-8E1B0E68FEDB} (3)
Admin: Yes
TestCab: 0x0
WGA version: registered, 1.9.42.0
Signed by: Microsoft
Product name: n/a
Architecture: n/a
Build lab: N/A
TTS error: n/a
Validation Diagnostic: 025D1FF3-230-1
Resolution state: n/aWgaER data-->
ThreatID (s): n/a
Version: n/aWGA Notifications data-->
Cached result: 8
File: Yes
Version: 1.9.40.0
WgaTray.exe signed by: Microsoft
WgaLogon.dll signed by: MicrosoftOGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 100 authentic
Microsoft Office Enterprise 2007 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-230-1_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\IEXPLORE.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{290F85A5-6AA8-4114-AE1D-8E1B0E68FEDB} 1.9.0019.0 5.1.2600.2.00010100.3.0.pro x 32 *-*-*-*-VWWR3 76487-011-5308291-22820 5 S-1-5-21-527237240-2052111302-1177238915 TOSHIBA TECRA A3X TOSHIBA Version 1.30 20060221000000.000000 + 0005E0E3407018400F2 0409 0409 Eastern Standard Time(GMT-05:00) 0 3 100 100 Microsoft Office Enterprise 2007 12 7480B9502DF0D86 oYWOW5ayFE3pZ + jvTpuXYsY64JE = 14 89388-707-8722531-65687 License data-->
N/AWindows Activation Technologies-->
N/A--> HWID data
N/AActivation 1.0 data OEM-->
BIOS string matches: Yes
Marker of the BIOS string: 5A2A:Semp Toshiba Informatica Ltda. 5A2A:TOSHIBA CORPORATION
Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005Activation 2.0 data OEM-->
N/Amy copy is not original, and was old xp cd I use xp 3 cd for repair service it help me please. my original xp key I on the laptop, I run the validation applications, the result is pasted below
Hello
1. you receive an error message?
2. using the same product key that came with your computer from the manufacturer?
I suggest to run the Windows product key update tool in the following article and follow the instructions.
Update your Windows product key
http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key
After updating your product key, you will be required to Activate Windows XP.
-
WRT160N v2 site blocking to the router even after reset and upgrade firmware
For some reason any my WRT160N v2 router blocks access to the following Web site: www.cngoons.com
I can connect on the site if I connect to the modem directly, or using the connection to the internet of someone else. However computers that connect through the router is unable to access the site via a web browser (IE, FF or Chrome), cannot ping the site, and a tracert also fails.
I have reset the router by default, but the site is still blocked. I've upgraded to the latest firmware (WRT160Nv2_v2.0.03.009_US_code.bin) and the problem persists.
Any ideas on what's going on?
And after a search even more, I found this old thread dealing with the same question:
http://homecommunity.Cisco.com/T5/wireless-routers/Linksys-router-blocked-website/TD-p/12917
A solution is given at the end to change the MAC address of the router (I cloned MAC address of my PC), and then restart the cable modem. It worked for me!
-
Windows 8 Pro shows Test Mode Build 9200 above the clock even after activation
Hello
After the release of Windows 8, I upgraded my Windows 7 Ultimate for Windows 8 Pro by purchasing a key online from Microsoft. I activated my copy of Windows 8, but on the desktop at the bottom on the right (above the clock), it says "Test Mode Windows 8 Pro Build 9200. Is there a way to solve this? Or I use a test version of Windows 8, even if I purchased an upgrade license?
Thank you!
Hello
In addition to the post of ikrstic, I tested orders bcdedit and if TESTSIGNING turned on I saw the Test Mode notification as well right. Using the bcdedit command turn off should solve the problem. Make sure that you run this as Administrator:
Go to your desktop and right click in the lower left corner
Click prompt (Admin)
Flashing cursor type: bcdedit - set off the TESTSIGNING
Press enter
To restart, press Windows key + C to get to the bar of charms
Click settings
Click Power
Click on restart
Thank you!
-
I wonder what are the sites my daughter runs after sitting in a corner with the laptop for hours, when asked a simple answer is not available and it's the end of the conversation. I have no doubt about it, I want to know if she is simply wasting time or seriously work and to be cool, although the question is here because the story is always empty...
Hello
I won't say anything to try to 'spy' on your activities of girls on his device.
If you're worried about what pages it visits and navigate too, it is easier to set up the network to run after devices in the household.
If you chase the laptop to see the navigation history, she finds, it will change just by phone (if it has) instead and lock with pin codes and so on.
It can also easily just be set to private Mode and avoid any local history for you to check.To configure the network, and the web pages that are available, you will find what your router and as an option, you may be able to use https://www.opendns.com/home-internet-security/parental-controls/
But a better way is to focus and guide internet works and what to stay away from and so on. If it is a matter of concern.
-
Mac does not accept the password - even after changing
My friend uses a macbook air, I'm pretty sure OSX Yosemite running.
Suddenly her pimp would not accept his password more.
We tried to reset the password via his apple ID, but even with the new password it told us that the password is not correct.
Any ideas how we can solve this problem?
Thank you!
Hello
Try to 'Reset' the admin password > change or reset the password of a user account from OS X - Apple support
-
Cannot stay connected to the network, even after replacing my old router.
I have a laptop Toshiba Satellite L655 is one year old and its operating system is Windows 7 home Premium I have Comcast internet service and use a NetGear wireless router.
Recently, about 2 months ago I got this router in Comcast, in replacement of my old 1. Why I asked that a new router was the former 1 had problems to stay connected to the internet. The problem persisted even with the new router so I look at it is not not a problem with Comcast or the router. I tried resetting the connection, the son, restart the router, diagnostics running on my laptop and are not yet able to resolve the problem. I run disc optimization, defragment the hard drive, run many virus / spyware scans and tried to disable startup programs as much as possible. This problem has frustrated me for months and I want to get it resolved. It sucks paying all that money for equipment and service and there not work directly without having to spend more money, which I have unfortunately not yet. Any help is very appreciated.Hello
You can check this link:Windows wireless and wired network connection problems
Maybe you are looking for
-
It's already happened and I closed the browser to get rid of him. I'm worried about security
-
After installation of service pack 3 I try to restart the computer, but I am sent to the screen that allows only "SAFE mode", safe mode with network, etc... Start up. Windows does not start normally. Also during the instalation it won't save the ba
-
I get this error message every time I boot the laptop: This application has failed to start because sqlite3.dll is not found. Reinstalling the application may fix this problem. I get this message as soon as I start the computer. I still don't know wh
-
Dual-boot-2 - MBR and GPT disks
I built a PC with a dual-boot, with the disc has been formatted using MBR and the two OS is Vista and 7. A table is written to the MBR with pointers in the two BONES, with this visible table before the start, allowing me to choose one or the other. W
-
A hacker took over my computer, I have no right to administor, I get the error messages "Acess denyed administor of the need to fix, I can't uninstall unwanted programs pretty much everything I try I get no permission - I want to just my admin. right