The Golden Gate system separate from the Production Server configuration

Similar Questions

• Copy the datafiles/redo logs from the Production Server to QA Server

  I need to update the QA database on server QA with the Production database on the Production Server. I intend to copy logs files from data/recovery of the Production database to replace the QA database datafiles/recovery logs. Should I stop the Production database before you start copying? If this is not the case, what happens if a Production database data file has been copied to QA and then this Production obtained data file updated before other newspapers of data/recovery files have all been copied to QA?
  
  Thanks for any help.

  881656 wrote:
  Should I stop the Production database before you start copying? If this is not the case, what happens if a Production database data file has been copied to QA and then this Production obtained data file updated before other newspapers of data/recovery files have all been copied to QA?

  If you use this technique without closing the database, copied datafile/recovery logs will be incompatible.

  You can use the RMAN utility to take backup of the production database and restore it on server QA.

  If the database size is small (about 10-20 gb) you can use EXPDP/IMPDB.

• PL/dynamic sql to retrieve the data from the production server

  Hello
  
  I need to create a dynamic pl/sql program to retrieve all packages from the production server and store it on my local machine in another file.
  
  Thanks in advance.

  Hello

  user9963922 wrote:
  Hi Peter,.

  Thanks for the reply.
  I need make my block dynamic while in a single query, for different packages I can save it in another file with the same name as the package on my local machine.

  What is the problem with the suggestion of Peter? This is not 'dynamic' on this subject?
  To save the code in the files, use utl_file. Inside the loop, open, write, and close a file. If you need help, your zip code and a description of the specific problem.

  It is also possible to use only user_source table to accomplish the task.

  Yes, but it doesn't work for you own schema.
  If you do not use user_source, then you will not need any condition as

  and owner in ('')
  

• Local language wrong in the production server.

  I have an app with a few projects with all two locale - Faroese and English. When I run the application on the application by default server on my local machine, it works fine with the locale Faroese, but when I deploy on our production server and try to run it from there the Faroese local doesn´t works more for one of the projects.
  
  For this project the values that are bound to properties files in my viewcontroller are indicated in Faroese as it should, when the application is run from the production server, but the values that are related to the entity objects and display the properties of the objects files do not work as they should more. English values instead of the Faroe Islands so the English files property are met, but the server does not be able to understand that the Faroes properties existing files or for some reason some prefer the local English for this project so that it can figure out to see other projects in Faroese, so I guess that the error is somewhere in my model project given that the locale Faroese works for my other projects on the production server, but I can´t find out where.
  
  So now I hope that someone here has experienced something like and can tell me what I need to do to correct this.

  Hello

  I think you've hit a problem with case name of the resource bundle files (* .properties).
  Even windows file system is not case sensitive that your file names MUST be exactly like the bundle Resource Manager is seeking.
  This works also on embedded because the resource bundle files are located directly on the file system.
  When you deploy the EAR/WAR files externally as files are found by the jar/zip finder which is case-sensitive!

  for example: bundlefile_EN.properies is not the same thing as bundlefile_en.properies

  I hope this helps.

  concerning
  Peter

• Package a package on the Production Server

  I use the updated sdk docs documents.  I have a plugin very simple helloworld.  It is composed, as in the example of echo service, she passes a string to a simple java service and receives the back string to display the user interface.

  It all works very well in the environment of the SDK.

  Now, I want to spend this plugin simple helloworld to my system of true vCenter (containing no eclipse, etc.).  Using the SDK - Tutorial.html, step 3 discusses "package and save your solution.  I used eclipse, such as indicated and chose "vSphere SDK Tools-> package vSphere Client plug-ins.  I made sure to make it dependent on my java service.  I looked on all the files, he created for me, and I had to modify the package.XML - plugin to set the < bundlesOrder > to have my load java service before my flex.  I created the zip file and put it on a web server that is accessible.  Then I registered using the #3 'old Client vSphere' method described in the SDK file - Tutorial.html.  I'm on https, so I made sure to include the correct SHA1 fingerprint.

  Then I restarted the WebClient service on the system of vSphere vCenter.  Then I logged.  When my plugin does not appear, I went looking in the newspapers.

  I looked in C:\ProgramData\VMware\vSphere Web Client\Logs\wrapper.log and found errors.  I can paste the full error below, but it starts with this:

  INFO   | jvm 1    | 2013/08/28 11:23:18 | [2013-08-28 11:23:18.349] [INFO ] start-signalling-2            <DE0005I> Started bundle 'com.vmware.vsm.vsmui' version '5.1.0'. 
  INFO   | jvm 1    | 2013/08/28 11:25:08 | [2013-08-28 11:25:08.223] [INFO ] onnection(7)-192.168.102.155  <DE0000I> Installing bundle 'com.acme.helloWorldJava.HelloWorldJava' version '1.0.0'. 
  INFO   | jvm 1    | 2013/08/28 11:25:09 | [2013-08-28 11:25:09.564] [INFO ] onnection(7)-192.168.102.155  <DE0001I> Installed bundle 'com.acme.helloWorldJava.HelloWorldJava' version '1.0.0'. 
  INFO   | jvm 1    | 2013/08/28 11:25:09 | [2013-08-28 11:25:09.642] [INFO ] onnection(7)-192.168.102.155  <DE0004I> Starting bundle 'com.acme.helloWorldJava.HelloWorldJava' version '1.0.0'. 
  INFO   | jvm 1    | 2013/08/28 11:25:10 | [2013-08-28 11:25:10.064] [ERROR] start-signalling-2            <DE0006E> Start failed for bundle 'com.acme.helloWorldJava.HelloWorldJava' version '1.0.0'. org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'HelloWorldJava': Initialization of bean failed; nested exception is org.springframework.beans.TypeMismatchException: Failed to convert property value of type 'java.lang.String' to required type 'java.lang.Class[]' for property 'interfaces'; nested exception is java.lang.IllegalArgumentException: Error loading class [com.acme.helloWorldJava.HelloWorldJava]: problem with class file or dependent class.
  

  So, he tried to start loading my HelloWorldJava, but failed.  Note that it loads perfectly in the environment of the SDK.  I kept this very simple code.  It does not load in pots of any third party or whatever it is.  The interface has only one method: echo.  So I don't know what I'm missing;  and don't know why it works in the environment of the SDK, but not on the production server.

  I also tried to look in the Tomcat catalina logs, but I don't see anything here that stood out.  In addition, newspapers just VPXD seem to show where I'm logged in, but no additional help for error details.

  Any help is greatly appreciated.

  I have attached a snippit of the wrapper.log containing any errors in this region, if you see something that I missed.  When you get to flex errors, you will see that it fails due to the dependency (as expected) because the java part does not load correctly.

  OK, I misunderstood your original problem.

  The answer is that you can continue to use Java JDK 1.7 as long as you set the compilation option - target 1.6 to generate binary compatible Java 1.6. The Web client server still uses JRE 1.6.

• Required for the production server?

  Hi all.
  
  Another stupid question here: we are trying to develop an application that retrieves the position and transfer data from an 11 g database. On the development server where the application is written, everything is local is all hunky-dory. However, when you try to move on toward a development server where the database is not local, emerging problems.
  
  On the production server, the file Oracle.DataAccess.dll is located in the web service /bin/ directory. Is it enough to allow a web service to access a database of remote, or is the component of Oracle data access install a required on the production server?

  Hello

  Oracle.DataAccess.dll is a piece of ODP.NET - there are managed components, not managed.

  In short, you need customer Oracle and various pieces of ODP.NET for a successful deployment. The client may be either a full or instant client and the version must match the version ODP.NET. Be aware of the 32-bit vs 64-bit issues as well (i.e. develop on 32-bit and deploy it to a 64 bit with 32-bit client server will cause problems if you have not set the 'target platform' correctly when you build your application).

  For future use, the ODP.NET forum is here:

  ODP.NET

  Kind regards

  Mark

• Newspaper archive database pending apply to the production server.

  Dear all,
  
  How to apply for standby database archive log apply to the production server.
  
  Please help me.
  
  Thank you
  Manas

  Follow the steps of permutation.

  http://taliphakanozturken.WordPress.com/2011/10/28/physical-standby-database-switchover-failover-operations/

  Talip Hakan Öztürk
  http://taliphakanozturken.WordPress.com/

• CFFORM - form validation does not AT ALL during the test on the production server

  So I did all my tests on my local test of Coldfusion server. All form input boxes are validated correctly, with a dialog box popping up when it has not been completed

  When I upload it on the production server, also running ColdFusion 8, it not there no event at all - no dialog boxes, cfform validation etc...

  I use the same client computer to test locally as I test it on the web, and yet I get two different results! Any ideas?

  THE FIRST THING to check in this case, it is that you can connect properly to the/cfide/scripts/folder via the web site on the production server.  This scripts folder is where ColdFusion retains all its javascript, CSS and other client files used in computing, the and other client UI features.  If your browser cannot access these files, these features will not work.

  Rapid tests is just to put the /cfide/scripts/wddx.js in your browser on the production server and see if you get the right javascript file.  If this isn't the case, you must make sure that there is a CFIDE virtual directory configured in your web site and that this directory is readable by users.

• To the production Oracle Configuration Management support

  Hi all
  Currently I'm going to Oracle DBA in the production support team. I get call from the Configuration Management team that come to this team. I don't have much knowledge about the CM. Now my question is
  
  1. What is the average of the Configuration management? What is the process generally goes into CM? It has no connection with oracle dba support?
  2. If I'm going to and Configuration management work, again I can come to field support for s/n?
  3. the CM is good for the growth of the carrer...?
  
  Pls clarify me. Thanks in advance.

  Salvation;

  Also check:

  Documentation
  Available at: http://download.oracle.com/docs/cd/E18041_01/index.htm

  Oracle Configuration Manager prerequisites
  Version 10.3.4 - part number E18274-01

  Manager Configuration Oracle Installation and Administration Guide
  Version 10.3.4 - part number E18035-01

  Oracle Configuration Manager Security Overview
  Version 10.3.0 - part number E12881-01

  Distribution Oracle Configuration Manager companion guide
  Version 10.0.1 - part number E14501-02
  Topic: Mass deployment

  Source:
  Index of Master for the Installation of the Manager (OCM) Oracle Configuration, installation and Configuration [1304794.1 ID]

  Respect of
  HELIOS

• CFTree not visible on the production server

  This code works on my local machine, but is not visiable on a production server... can't understand why:
  Any help would be appreciated.
  TIA
  Mark Holm
  
  < cfform format = "Flash" skin = "HALOBLUE" name = "t2" >
  < cfformgroup type = "horizontal" >
  < name cftree = 'menu3' style = ' borderStyle:solid ff0000 3px; " Indentation: 0; "width ="160">
  < cftreeItem display = "MENU1" value = "MENU1" expand = "No" >
  < cftreeItem display = "MENU1 sub 1 ' value = '1' parent ="MENU1">
  < cftreeItem display = "MENU1 sub 2 ' value = '2' parent ="MENU1">
  < cftreeItem display = "MENU2" value = "MENU2" expand = "No" >
  < cftreeItem display = "MENU2 sub 1 ' value = '3' parent ="MENU2">
  < / cftree >
  < cfformgroup type = "TABNAVIGATOR" id = "myTab" style = "tabHeight:0; tabWidth:0; borderStyle: none; marginTop:0; ">
  < cfformgroup type = "PAGE" label = "Default" >
  < cfformItem type = "text" > default page < / cfformitem >
  < / cfformgroup >
  < cfformgroup type = "PAGE" label = "MENU1 sub 1 ' >
  < cfformItem type = "text" > MENU1 sub 1 < / cfformitem >
  < / cfformgroup >
  < cfformgroup type = "PAGE" label = "MENU1 sub 2" >
  < cfformItem type = "text" > MENU1 sub 2 < / cfformitem >
  < / cfformgroup >
  < cfformgroup type = "PAGE" label = "MENU2 sub 1 ' >
  < cfformItem type = "text" > MENU2 sub 1 < / cfformitem >
  < / cfformgroup >
  < / cfformgroup >
  < / cfformgroup >
  < / cfform >

  Review of the files from the server, found some missing files in CFIDE dir... so I copied the files from another installation of cfmx7, CF restarted and it solved the problem

• A process called "svctimesag.exe" consumes high CPU on the Production Server.

  OT: svctimesag.

  Hi team,

  In one of our Production Server is a process called "svctimesag.exe" using high CPU. This problem has been detected the day before.

  For immediate solution, we killed the process, but it did not help, then you need to restart our server.

  In the past 24 hours this process has shoot to the top of the CPU twice and you need to restart the server with force.

  Also searched the Internet but found no information. The location of the file on the server is C:\Program Files (x86)\Products\svctimesag\svctimesag.exe

  We organize engine on the server management application. We also opened the case with them to know the process.

  If any user face any problem with that part of process please your valuable troubleshooting strike.

  Thanks in advance.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• stackd deletion of snapshot to 99% on the production server

  Hello

  On ESXi 4.1 (thick Prov.) I only have a single host with 4 snapshot. He had 20 GB of free space on esxi host. I started the deletion with 1st snapshot (40 GB) process, but it stacks up to 99% for 2 hours. I used the vSphere client.

  I ran the following command in the command line

  # ls - lute | grep-e ' delta | dish. "

  output:

  03:30(Current_Time) Server-000002 - delta.vmdk

  00:07(Start_Time) Server - flat hard

  00:07(Start_Time) Server-000004 - delta.vmdk

  (a few year ago) Server-000001 - delta.vmdk

  (a few year ago) Server-000003 - delta.vmdk

  Help, please. It is a production server.

  Thanks in advance

  With the timestamp of the file flat.vmdk always updated, I think that it just be patient.

  What kind of local controller do you use and there cache writing? This makes a huge difference in the performance of the disk.

  André

• MSM760 welcome page on the external server configuration

  Hi all

  Please help us to understand and configure the following:

  1. our MSM760 controller work with e-MSM430 APs in L3;
  2. we configuration and monitoring of the various local networks for different clients.
  3. in case of we need to provide some VSC welcome page is possible do not bring and put all the traffic in the controller? The problem is that if we do this the most. Speed DL/UL for the end user is less than 5 Mbps and w/o controller of more than 15 Mbps homepage.

  How to re-route traffic outside MSM760?

  Thank you

  Nikolai.

  Nikolai,

  You are in the forum of finished consumer products.  You want to ask your question on to the Enterprise Business Community.

  Click on the plus sign (+) next to the Forums of Discussion fall all server options, networking and any other problem of professional equipment.

  http://h30499.www3.HP.com/

  Good luck.

• The Web server configuration

  I have Labview 2011 SP1 running under windows XP. We have Microsoft Silverlight 4.1.10329.0 installed by our COMPUTER organization. In the Labview Project Explorer, under Tools-> Options-> Web server application server server Web is grayed out.

  Is there something special I need to update or purchase to activate the Web application server.

  Hi Joseph_Loo

  Have you tried to repair or reinstall LabVIEW?

  Kind regards

• The ACE can be configured for recording the syslog server configuration changes?

  Hello

  On all our routers, switches and firewalls, we have configured syslog so we get headlines when configuration changes occur.

  Is it possible on the ACE too?

  Kind regards

  Sebastian

  Hi Sebastian,.

  Yes it is possible but depends on the upong the logging level, you have defined. So record trap 5 should be able to get configuration changes or command execution logs.

  November 1, 2013 11:20:33: ACE-5-111008%: "admin" user running the command "logging buffered 6'.

  November 1, 2013 11:20:48: ACE-5-111008%: "admin" user running the command "no book testlog.

  So, you should see these newspapers of level 5 on syslog if siphon 5 logging is configured.

  Let me know if you have any questions.

  Kind regards

  Kanwal