The HD 5450 M dedicated graphics card not recognized DM4t: SOLVED

Similar Questions

• Satellite P305-S8822 - withdrawal of the dedicated graphics card

  Dear members of the forum,

  probably due to a fault of the graphics card dedicated to my

  Toshiba Satellite P305-S8822 (PSPC4U - 02T 014)
  Processor Intel Core 2 Duo T 5550
  ATI Mobility Radeon HD 3470 graphics card
  3072 MB PC5300 DDR2 SDRAM
  200 GB Serial ATA hard drive

  I'm not able to install Windows 7 or an another Version of Windows. Because I don't have the dedicated graphics card (only the onboard integrated graphics card) and found no BIOS option to turn it off, I would like to remove it from the motherboard. Unfortunately, I wasn't able to find out whether or not the ATI graphics card is welded (which this would make very difficult). Thanks a lot for your answers and a better idea to solve the problem.

  To be honest, it won't be easy to solve your problem. Why?
  Many people who have mobile machines the same logic valid for desktop computers. Exchange upgrade or hardware components on mobile units is very limited and you can simply swap the GPU or change the BIOS settings.

  If the GPU is faulty in many cases entire motherboard must be replaced. I don't know what other people will write here, but what you can do is contact the nearest Toshiba service provider and ask for help or advice what can be done about it.

• Inspiron 3737 - pass fron integrated to the dedicated graphics card

  Hello

  I got Dell Inspiron 3737 with integrated graphics card Intel 4000 and dedicated Radeon HD8670M graphics card.

  Several weeks ago, I discovered this laptop works only with integrated IntelHD4000 (Win7 x 64). I installed the drivers of the latest GPU to dell, but it's not not to solve the problem. I installed older drivers, but also, there is no problem.

  I decided to reinstall windows.  I installed Windows 7 x 64, all the drivers from the dell site in the order which they suggest. But laptop also only use IntelHD4000. In Device Manager shows two graphics GPU Intel HD Family and AMD Radeon HD8670M. Catalyst, AIDA64 and CPU - Z will find only Intel HD 4000. Reference Dell start diagnostic tools and Dell Online Diagnostics found no no problem (all tests was passed).

  I tried to contact the technical support of Dell and got the following response "what did you want us? You are no longer under warranty and it's your problem! ».

  If I understand correctly the video driver installation and switching between integrated and dedicated graphics are global problem. Solve someone has mentioned the problem and how?

  Hi p ol,

  Thanks for posting.

  Please try these troubleshooting steps that may help solve the problem.

  First connect your wired laptop so you don't have an internet connection.

  -The first is to uninstall/reinstall the graphics driver AMD.
  -Go to Device Manager and uninstall the graphics driver.
  -Next is to check programs and features and uninstall everything related to AMD.
  -Once done, download and install the latest AMD graphics driver.
  -Here is the link: http://support.amd.com/en-us/download
  -Restart your laptop once the latest driver has been installed.
  -Test your laptop again after these steps.
  -Do the same with your wireless adapter, uninstall/reinstall it so.
  -This is where you can download the wireless card of.
  - http://www.dell.com/support/home/us/en/19/Products/?app...

  Post here and experts can help.  Thank you.

  Kind regards
  Robert

• Card dedicated Y570 GT555 graphic is not recognized

  

  So I have two left, one with windows 8.1 and the other with windows 7 but after upgrade to windows 8.1, I noticed the ability to switch the internal graphics card to the dedicated graphics card (nvidia geforce

  GT555) came with the laptop, no longer works.

  So I went into windows 7 and went only the dedicated graphics card too have stopped working.

  No idea why.

  I went to try to update the drivers, but have had no luck with the installation software driver telling me I have no graphics driver.

  Any help or comments?

  See you soon

  Go into your BIOS by pressing F2 during startup, go to the Configuration tab and check the graphics device option. If she says the UMA chart change to Switchable Graphics and try the installation again.

• Getting error while booting: "the Catalyst Control Center is not suppoerted by the version of the driver for your current graphics card.

  Original title: error message

  Whenever I turn on my computer (Windows Vista) I get the following error: "the Catalyst Control Center is not suppoerted by the version of the driver for your compatible graphics card. Please update your ATI graphics driver or enavle your ATI card using the display manager. "How can I do this? and do I do this?

  Hello

  Update the driver may solve the problem. See the following article to install/update the drivers.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also download the drivers from AMD. Choose the appropriate brand and model of the device and download the drivers.

  http://support.AMD.com/us/gpudownload/pages/index.aspx

• When I'm looking online, I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.

  Hello

  I have a fujitsu lifebook p series windows 7 and every now and then especially when I am looking online I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.  I challenged tech stores to be looked at, but they were not able to fix it. Does anyone have any suggestions? Thank you
   
  Original title: help again...

  I have moved your question to area drivers & hardware.

  If your PC uses the Intel chipset, see this: http://communities.intel.com/message/172740#172740

  Updated drivers can be made of:

  https://Downloadcenter.Intel.com/default.aspx

  Best bet may be to contact the vendor of PC.

  -steve

• Pavilion 15 e008-sc: dedicated graphics card update

  Hi one just want to ask if possible to modify and update a dedicated graphics card?

  AMD Radeon HD m 8670 is dedicated to my laptop inside. I want to update this to little graphics card more powerful. I don't want to buy a new machine. It is possible on this type of material.
  
  If so, that will be good? I can put here nvidia or amd graphics chip, it must be?

  CPU: Intel i5 - 3rd generation 3230 m 2, 6 ghz

  RAM: 8 GB

  I think that the processor and RAM are kind a good but the power of the graphics card is somehow a hollow. Thanks for the reply

  Hello

  Unfortunately, the Radeon HD m 8670 is integrated with the system board and is not an evolutionary element - this is the case for virtually all mobile phones as a consumer.

  Kind regards

  DP - K

• Acer Aspire E1-571 dedicated graphics card

  Hiya anyone know if taking the Acer Aspire E1-571 who joined the graphic HD4000, a dedicated graphics card?  Thanks in advance

  Hello

  This model does not come with dedicated VGA (Nvidia or ATI), there only inbuild Intel HD graphics. If any model acer contain end letter 'G' the name of the model (Eg: E1-572G)  he dedicated VGA.

  Thank you

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• CQ5110y - new graphics card not detected

  I have a cq5110y that I am trying to upgrade the graphics on.

  I just installed a bigger power supply and is working on the installation of a Sapphire Radeon R7 240, but when I turn on my computer it does not detect the new hardware.  Am I missing a step?  Or is the card DOA?

  The steps to install the new card were quite simple--plug it into the PCI-e slot and connect the monitor.  There was a note to disable any integrated first graphic, so I put the display to PCI-e in the BIOS.  Is that all I had to do to disable the integrated graphics card?  I think that this could be my problem?

  Your Compaq Presario CQ5110Y desktop uses a chipset NVIDIA GeForce 6150SE nForce 430 seems limited to the PCI Express 1.0 version.  PCIe v1.0 is compatible front of PCIe v2.0.  PCIe v2.1 and above is not backwards comptible with your motherboard. Your Sapphire Radeon R7 240 seems to use a PCIe v3.0 card and is therefore not compatible with your computer. Please return the card for a graphic card PCIe v2.0 solve your problem.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• dedicated graphics card problem

  Hi all!

  I have a HP probook 4530 s and after 2 years of using the dedicated graphics card (ATI Radeon 7470) seems to have a problem. I was playing my game, which is a flash game based on chrome and suddenly the screen frozened. I use by default the ATI graphics card because the system supports switchable graphics. So, after this screen frozen, I turned off my laptop and after I turned once again he doesn't want to go through the screen of windows welcome. I went into safe mode, disabeled ati graphics card and after I restarted again, I could get properly into windows. A funny thing is that after that, I reinstalled windows and the first thing is to install the graphics driver. After clicking on restart my laptop frozened again in the Welcome to windows screen.

  Can anyone help me please with this problem?

  Thank you in advance.

  Try from the BIOS, there is something that you can uncheck it from the BIOS and it will work exclusively on the second card, of the processor.

  The thing is that I found the problem and it is verry annoing. I disassembled my laptop to renew the theat conductor paste and I saw that the old spent was melted by the heat by the graphics card and drained on certain components close to, and I know that this dough is a conductor of electricity now so bye bye dedicated graphics card.

• Error on startup: "control Catalyst Centeris ignored supported by the version of your current graphics card driver.

  I downloaded this update - ATI Technologies Inc. - Display - ATI Radeon HD 3200 graphics. After the installation, I get this dialog at startup "the Catalyst Control Centeris not taken in charge by the version of the driver for your compatible graphics card. Please update the ATI graphics driver or enable your ATI card using the display manager. "I looked for the display manager but can't find it. What should I do?

  In the devices you can try to select your ATI device, properties, back the driver.

  If it does not, see my post above for information on where to get the driver

  Configure MSUpdate for Important / critical updates only and ignore the optional updates

• SD card not recognized in A07

  Dear

  I have upgraded my device (A1-07) to 4 android but the Sd Card not recognized by Tablet what should I do. I can not install any program.

  Please help me

  Kind regards

  M.S.Homayouni

  Hi M.S.Homayouni,

  Your question may be similar to this topic. You can try the solution that has been published to see if that solves your problem?

  Hope this helps

• Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device

  Hello

  I have a Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device. I uninstalled and installed Arcsoft Webcam Suite, which has drivers, but nothing new.
  It seems that the built-in webcam is not connected.
  Thank you

  See Sony support site or their forum, this is a Sony webcam

  And no this isn't a feature of device, or something that should appear in the devices & Printers

• I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Ligh.

  I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Lightroom."  How can I import it please?

  I find the program file for Lightroom 5 and make an icon of office for him. And I would get rid of Lightroom 3. If you open Lightroom 3 and you see images in the old catalog, not the updated one.