The HD upgrade and memory issues - Satellite P200D - 10 p

Similar Questions

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• Official release of the drivers XP and Vista for Satellite Pro P100 - 465 PSPAEE

  When will it be available for XP and Vista for the PSPAEE drivers? Currently there are drivers for the PSPA4E, some of whom work, others do not, no operating system. Yes the laptop is preinstalled with the Vista Upgrade and pilots work, but two of the pilot applications are blocked by Defender (NDSTRay / ConfigFree and VolControl). I couldn't get no option to allow to these (not yet classified MS so they are locked) told me to disable Defender technical support!
  I tried a clean install of my own version of Vista business and had problems of drivers with that as well.

  I would like to run XP until Vista is, shall we say, more effective I would use drivers specifically for her, so time would be very useful.

  I would also like to know why there is a where a finger scanner could go under the 0 on the keypad, and a blocked stop lower PCMCIA port (PCI-E?) when any of these are available as an upgrade option? I missed these upgrade options or is it a case of recycled from another model, they exist? If the latter then it is quite cheap for a new machine :)

  Hello

  We have all the users here can suggest only it seems that Vista and XP drivers are already available for Satellite Pro P100 PSPA4E
  So in my opinion the next drivers for the next series should follow in the near future

  I don t see it differently as to wait

  Of course, you can test different drivers from different series as Sat P100.
  Many laptop models use the same devices and therefore different unique pilots could be compatible

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• How to upgrade video memory on Satellite L40 - 17R?

  I have laptop Toshiba Satellite L40 - 17R with 2 GB RAM and I want to upgade my video memory: 256 MB Max (384MB). How can I do this?

  Unfortunately you can not upgrade you RAM physically as your video RAM is just shared memory.

  You can try to increase the amount of RAM in the BIOS because the video RAM should be a shared memory. If you can't find some options in the BIOS, that allows to increase the amount of video RAM, then you won´t be able to update...

  To learn more about shared memory, please see the following site:
  http://en.Wikipedia.org/wiki/Shared_Memory_Architecture

  I must also tell you that even if you would be able to increase the amount of graphics memory shared, it won´t affect performance not really since the system RAM is slower then a sort of RAM dedicated.

  Welcome them

• Need advice on disk HARD and memory on Satellite A100

  I am buying a Satellite A100-756 which has a 120 GB of HARD drive memory and 1 GB.

  I've seen what seems like hatches for easy access to these two areas. Is it easy to upgrade, and this will affect the warranty?

  I also try to find out if the HARD drive with the laptop's SATA? Can someone help me with how to do it?

  Hello

  I'm not 100% sure, but the latest and all the latest Toshiba laptops models have SATA hard drives. To be honest you I really understood why t HDD upgrade. A100 is a newer model with really sufficient HARD drive capacity. Compare with the other laptop models and you will see 120 GB is more than enough. Upgrade of RAM is always good.

  In any case the decision is yours and you can do what you want. Upgrade memory should not be problem because the coverage of memory is in the lower corner. Sorry, but I can't tell you where is the HARD disc, but the fact is that, probably, keyboard must be removed.

  I recommend you contact your local dealer and clarify this point with him. Upgrade memory should not be a problem but to upgrade the HARD drive, it is necessary to disassemble the camera (not all), and it definitely the warranty valid.

  Good bye

• Upgrade of memory issues

  Hello

  I have HP Compaq dx2200 system and two 512 MB DDR2 Synch DRAM PC2-5300 (667 MHz) stiks Non - ECC (1 x 512 MB).

  So, I decide to switch to 2 GB and I bought Kingston PC2-6400. Also, I bought two PC2-6400 1 GB stiks.

  Well, but after I installed the first 2 GB is the system beeps constantly.

  So I try to install two other stiks from 1 GB - the same problems!

  Y at - he of the uncompatibility?

  Any help, you will enjoy!

  Yes, a compatibility issue is exactly the problem you are experiencing. Plug-ins must match the original modules in all respects. They must be of the same manufacturer, same capacity and same type and speed. (Synch DRAM PC2-5300 (667 MHz) Non - ECC).

  Install identical memory modules only if you want to upgrade the memory successfully and without surprises. If you can't find the identical memory modules then buying two modules of 1 GB guaranteed compatible. Remove the original 512 MB modules, put the new guarantee compatible memory modules in its place and its startup in Windows.

  Source modules by searching online I did below

  http://www.memorystock.com/memory/Compaqdx2200.html

  http://www.Elive.co.nz/Kingston-1gb-KTH-XW4300-t8839.php

  http://www.Amazon.com/memory-HP-Compaq-business-desktop-DDR2-5300/DP/B00989B7NS

  http://edge.crucial.com/upgrade/HP-memory/HP+business+desktops/dx2200+series-upgrades.html

• How to set the processor affinity and memory.

  We have explicit recommendations of our application provider to set the processor affinity for one of our virtual machines running their product. However, this process is not quite clear to me despite the available docs. We are company ESXi 5.1 more.

  By looking at the tab "resources" for the parameters of the virtual computer you see under CPU:

  Actions (I would do that quite high so that it never goes to confront other good?)

  Booking

  Limit

  The requirement is to set aside x cores for the virtual machine while it is never claim to waiting or resource. They would also potentially implement affinity memory related to the same socket for the effectiveness of the NUMA node.

  We have a host with 2 8-core processors with 256 GB of memory. I'm not worried about the affinity of memory. This should be as simple as the control that the 'reserve any memory comments' correct?

  Is it simpler just set up a pool of resources for cela CPU and memory? The only concern I have is it if the processor uses the same memory channels. We do not want a CPU into a socket using the channel memory of another plug for this virtual machine.

  And it's too late to go back to physics for this system.

  Eeghads! Just FYI, the processor affinity is almost never what a seller really wants, even if they think they do. I can imagine there are valid use cases, but I spoke with several vendors who recommend this, and they were all wrong.

  From what I understand in your summary, the application is sensitive to the latency of the CPU. If the physical compute capacity, actions and reservations will address the latency. Latency is the only reason why they want to set the affinity, or are there others? If there is other, know what they are, because there is a good chance to those who are also invalid reasons. The processor affinity tends to exacerbate the problems you're having with loans time CPU and can often cause latency application MORE CPU than that without it. Yes, you can set up reserves of CPU to address these issues for this particular virtual machine, but you made life more difficult for the CPU scheduler. DRS involved in the loan time CPU, which means she won't necessarily move these other virtual machines on this host, even if they are jointly stop like crazy. While we're on the subject, this virtual machine would need to be excluded from automatic DRS migration, since you cannot vMotion with the processor affinity configured. It also means the virtual machine must be powered whenever his current host goes into maintenance mode.

  In any case, verification 'reserve any memory comments' will not affect memory locality. Will just leave all the pages of virtual memory with physical memory pages (another side effect interesting is that creates the virtual machine is no longer a pagefile on the boot). If you REALLY have to set the affinity to the CPU/memory, memory affinity can be set by changing the settings of the VM, the tab "resources", select Advanced Memory, and you can configure NUMBER here. In addition, if you had already seen it, the processor affinity is configured in the tab "resources", under Advanced CPU.

  I highly recommend you challenge the seller and ask if reservations CPU are sufficient. The planner of UC is already aware NUMA. VCPUs how they ask, anyway? Unless they want to more than 8, it is unlikely to split the virtual machine.

• Can I play games like the SIMS 3 and oblivion on Satellite A300D-17F?

  Hey,.

  I will soon buy the laptop Satellite A300D-17F, which has an AMD turion ultra 2.2 ghz, 4 GB RAM, ATI hd 3650, drive HARD 320 5400 rps... etc...
  I was wondering if I could play games on it, but not crysis and far cry 2. I like games like Oblivion and sims...
  I'm going to play these games without any problem and especially the sims 3 and oblivion... ??

  Thank you!!!

  Hello!

  Well for Oblivion, you need at least a processor at 3 GHz, 1 GB of RAM and a graphics card Radeon X 800 for details.
  So I think that there should be no problem to play oblivion on medium-high quality, may be high is also possible.
  Furthermore, I played The Elder Scrolls III (Morrowind), the game before and I liked it, it s a very nice RPG. :)

  I was wondering if you wrote about the SIMS 3 it of not released yet so system requirements are not known to me.
  But I think that it should also work on your laptop at least of low quality.

  Good bye

• Replace the hard drive and memory - guaranteed?

  Recently, I replaced the hard drive on the Wyvern with a 640 GB WD Scorpio Blue after finding that the Toshiba disk stock was reallocating too many sectors (readers are functionally identical), and memory has been updated there is a 2 x 4 GB G.SKILL Kit (from stock 1x4Go, 1x2GB).  My laptop now needs to be repaired for hardware problems totally unrelated to these parties (specifically, one damaged USB and Ethernet Jack).  Overall coverage is affected by these parts or these replacements continue to allow outside replaced part complete warranty coverage?  (The Service Manual indicates that both of these parts are replaceable by the user.)

  -Dragon280

  I'm not an employee of HP, I'm just here to help.
  If this post has solved your problem, click on accept as Solution so that others can find them easily. If you found this post useful, don't forget to say 'Thank you' by clicking on Bravo thumb upward.

  Watch more closely the warranty conditions and found:

  This limited warranty [...] does not extend to any product [...] that has been damaged or rendered defective [...] (g) by modification or service by a person who [...] (iii) your own installation of end-user replaceable HP or HP parts if available for your product in the country or region maintenance. [...]

  The way I read the warranty conditions, the conditions above may apply, because the parts are not 'HP or HP approved parts', but only if the defect is actually caused by the replacement of these parts.  In addition, the Federal law stipulates that the simple use of third parties do not void a warranty (15 USC §2302 (c); Please note that I am not a lawyer).

  Anyone else agree or disagree with that?

  -Dragon280

  Edit: Because no one else answered, I will accept this position as being the solution.

• can I use an external hard drive to increase the disk space and memory on xp?

  I am considering an external hard drive of 1 TB to trasmet all files on the computer. There is little hard drive space and memory left. Can I use the external hard drive free space and can it will be installed via USB and use my operating system?

  You can use the external hard drive to transfer your data from your internal hard drive.  Cannot move system files (such as Program Files, Windows and swap files) well.  Looks like your use of the word 'memory' made reference to disk space - it normally refers to which an external drive would not affect RAM.  If you mean disk space, however, you can certainly free SPAC drive this way.

  I hope this helps.  Good luck.

• Help..! I got the blue screen and other issues, do not know what to do...

  Signature of the problem:
  Problem event name: BlueScreen
  Please help me, I got the blue screen and this message today while I was trying to solve a problem with the backup of my pc...
  Don't know what to put here, if you need more make me know... Thank you

  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 8086
  BCP1: 00000000
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini030513-01.dmp
  C:\Users\Andy\AppData\Local\Temp\WER-59483-0.SysData.XML
  C:\Users\Andy\AppData\Local\Temp\WERF871.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Thanks for posting the question in the Microsoft Community!

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you check out the site:

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Note: When you format a disk, all data that it would disappear.

  It would be useful for us to identify the problem, if you could upload the dump file.

  You can use the Sky-drive to download the dump file. See the link for the steps on how to download Sky-Drive.

  Download pictures and files:

  http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

  The location of the dump file is C:\Windows\Minidump\.

  If the problem persists, or in the future if you face problems of Windows let us know and we would be happy to help you.

• Need of advice, the GPU upgrade and power

  Since this is my first post here I would start by saying hello to everyone. I recently bought an HP Elite M9400t Core 2 Duo Quad 2.5 GHz. It came with 4 GB of ram and an its Soundblaster wireless Xtreme pci-e card but unfortunately only came with an Nvidia 9300 GE, which is more or less a rebadged Nvidia 8400. I would like to know what are my options for the upgrade. I would like to upgrade a 680 to 700 watt power supply food to accommodate the new GPU and I've had my eye on the Geforce GTX 260, but the thing is 10.5 inches long. I measured and it would be a tight fit, but the PSU cables would be in the way, unless I went the way of a modular power supply. HP came with a 350 watt PSU. Tell me a 350 Watt power supply would be sufficient to run say a Nvidia 9600 gt or say a solution simple 9800 gt slot. They all have two minimum system requirements of 400 watts... But.  And. will be a more recent judgment out of the PSU shelves fit in my case? And there at - it no real advantage to using the modular power supply she calls space-saving? Thank you for your help in advance.

  This 9600 GSO is easily from 550 to 700 MHz overclock with ATI tool or equivalent, to put it in with the 9800 GTX.

• Problems with the Express upgrade and an upgrade key

  Before I've had my laptop, I have purcahsed a Windows 7 Ultimate upgrade disks and Windows 7 Professional. I used the ultimate update on my desk and I try to use the Professional on my laptop (which came with home premium).

  The problem is that I now have a "non-genuine" copy of Windows 7 because every time the upgrade does not accept my upgrade key. I understand that they are updated slightly different, but anyway that I actually purchased is more expensive than the anytime upgrade. How to make this work?

  Laptop has Windows 7 Home Premium. I used the Express upgrade to upgrade Windows Professional. Now activate Windows asks me to activate Win7 professional and will not accept the key that came with my Windows 7 Professional upgrade disks. The Activation Assistant says that I don't have the OS to use this key. The online troubleshooting guide says that such an error would occur if I am trying to use the upgraded edition to do a clean install (for example).

  I don't understand, how were you able to upgrade to Windows 7 Professional in the first place through Windows Anytime Upgrade? You have been invited to enter your key first. Windows 7 Home Premium license that you upgraded was activated before the upgrade to Windows 7 Professional through Windows Anytime Upgrade?

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link to change your product key

  Enter your product key and use the phone Activation to activate your license. Be sure to explain your situation to the Appeals Officer.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Question about the CPU load and memory...

  Hello. I'm a South Korea network engineer.

  I am facing a problem with the DMP 4400.

  I made a web page to publish the DMP 4400, but she loading has been so slow.

  I don't know why it slows down, but it may be because of the memory or cpu.

  So, I need to check the CPU and the memory usage...

  is there anyone know control order CPU and memory?

  I searched documents and web site include Cisco, but I couldn't know.

  Jinsung salvation,

  This should give you the amount of memory on the device:

  https://:@:7777/get_param?p=sinfo.memory
  

  It should I think give you the CPU:

  https://:@:7777/get_param?p=sinfo.load
  

  Kind regards

  Nicolas