the hidden start v 2.1

Similar Questions

• Satellite L300 - I can recover from the hidden partition

  Hello

  The vista on my L300 will not start.

  I try to use the modem for the first time, but he could not communicate with the line. So I delete in "Device Manager".

  After the reboot, vista boot screen appears only for 3 seconds then restart the laptop. There is no way, no safe mode...

  Contact the hd as an external drive XP say 'unknown' 0 bytes, with Linux just like named 'vista' and I could open all the files.

  I have no recovery. DVD burning with the Toshiba Recovery program has failed tree times and so I give up.

  the hidden partition is ok. On my laptop from a different manufacture, I can recover from this hidden partition. Is it possible to do it on my L300?

  Thanks for the information

  Thorsten

  Hello!

  The hidden partition you want to say has nothing to do with the Toshiba recovery image.
  There are files for system restore, and it is a feature of Vista, not Toshiba. If you want more information about the restore of the system here is a good article from Wikipedia:
  http://en.Wikipedia.org/wiki/WinRE

  The HARD drive recovery folder contains the original recovery image and if you don t have access to this folder and do not burn the recovery disc, you need a new.
  You can get one from an ASP, but you can also order a disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• The hidden partition

  Hi dear,

  I'm here looking for a solution for my problem restore acer Apire E1-571.

  I bought this laptop as refurbished store Curry with 8 pre-installed windows.

  After that the first boot and windows update, I immediately created WindowsImgageBackup on external hard drive.

  For reasons couldn't start windows. Then I created a windows recovery CD a friend 8 and through the recovery options. Auto repair all, refresh and delete everything and reinstall windows are failed one after the other. Then to restore the WindowsImageBackup Windows. At the end of the process got "Windows successfully restored" to this day, that the backup was created.

  To restart windows, it has managed to pass the acer logo and got a flashing screen and never goes out of this screen.

  Then I managed to with help from someone on the net to pass through the former function of F8 and run windows Safe Mode, and it has begun to find mode safe mode with active network.

  I went to settings of computer laptop-general update or reinstall from there, but get error message says 'there are some missing files, your recovery media will provide these files'. Of course, I have no recovery media! Have one, will cost me £60 and 14 working days as I told by acer support.

  The problem is that the hard disk 16 GB hidden recovery partition created by acer. I ran the DISKPART command to CLEAR the hidden attribute to create the recovery from it, media but CLEAR command never works with this partition despite test it with other partitions and it works fine.

  Is it possible to not hidden this partition and create the installation OR acer media make it impossible to get the 60 books of clients despite the payment of pray complete product including the HIDDEN PARTITION at the time of the purchase?

  Note: All assistance should consider my laptop works ONLY in Mode safe mode with network enable and can access the internet by any download but not all facilities!

  Thanks in advance for any help.

  As if in response your other post, I suggest that you try this link to view these scores of Win8 explore using the command diskpart as administrator. You can then transfer them to a USB stick and use it for recovery.

  http://medicblog.NET/?p=906

  Jack E/NJ

• "' Just removed malware System Check, but the links lost for most of the programs in the menu start" all programs. "

  For example, I can open a drawing by clicking the .dwg file in CAD Solution Explorer, but in programs from starting, I can't open the program. When clicked on the link says "empty." Advice?

  http://www.bleepingcomputer.com/virus-removal/remove-system-check

  If you're infected with system check it is important not to delete all files in your Temp folder or use of cleaning of temp file. It is because when the infection is installed, it will remove shortcuts found in various locations and store the backups of them in the %Temp%\smtmp folder. It does what you have when trying to launch a program in your Start menu, any of your shortcuts will appear and making it so you think that your computer has a serious problem. Therefore, if you do not want to delete all files in your Temp folder to delete the backups we use later in the guide to restore your Windows Start Menu. For a list of folders that the shortcuts are deleted and the corresponding directories where they are stored, see this topic: Unhide.exe - an introduction as to what made this program.

  To still do believe that your computer is not working properly, check system will make also as well as certain folders on your computer screen without content. With the opening of these files, such as C:\Windows\System32\ or various drive letters instead of see the list of files that it goes to the contrary to view the contents of a different file or make it seems as if the folder is empty. This is done to make believe that there is corruption on your hard drive which causes your files to not be displayed. It does this by adding the + H, or hidden attribute to all of your files, which causes your files become hidden. It will then change your Windows settings so that you cannot view hidden and system files. Once the rogue process is completed, you can enable the setting display the hidden files, and be able to review your files and folders, by following the instructions in this tutorial:

  How to see hidden files in Windows

  The malware removal forum free options include:

  http://www.bleepingcomputer.com

  http://discussions.VirtualDR.com/forumdisplay.php?f=71

  http://www.dslreports.com/Forum/cleanup

  http://www.DaniWeb.com/hardware-and-software/Microsoft-Windows/viruses-spyware-and-other-nasties/64

  http://www.GeeksToGo.com/Forum/Forum/118-security/

• I get the following error message "error of compilation in the hidden module: autoexec.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Messages of ideas: error

  "error of compilation in the hidden module: autoexec.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi rsfin,

  ·        When exactly do you get this error message?

  ·        You did it all change hardware or software on your computer before this problem?

  If you get the error message in Microsoft Word or Excel, you can follow this link.

  You receive an error message "Error in the module hidden compilation" when you start Word or Excel

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can not find the button start or the taskbar (Windows XP)

  I can't find the button start or the taskbar on my computer.   I ran antivirus program and in the process must have hidden these.  How can I post because I can't go to the start menu.  Unable to access by pressing ESC or in safe mode.

  Hello

  Here is some additional information...

  1. Right-click the Notification area, and then select "Properties".
  2. Open the tab of taskbar, uncheck the box marked "Hide inactive icons".
  3. Click 'OK' to save the changes and exit the Properties window.

  Hope this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The hidden icon arrow is not visible...

  The arrow that appears when it is rarely used icons are hidden is not visible.  All the icons are show all the time.

  "cessnaguy" wrote in the new message: * e-mail address is removed from the privacy... *

  I am referring to the taskbar on the bottom of the desktop.  On the right side of the bar tasks are what I think are the quick start icons.  When them 'icons hide rarely used' are selected in the startup options that displays an arrow that allows the user to display all the icons on the right side of the taskbar or only icons that are used most often.

  You are referring to the icons in the notification area of the taskbar.  You won't see any arrow, if there is no hidden icons.

  Right-click in an empty area of the taskbar (not the notification area).
  Select "lock the taskbar".
  Right-click in an empty area of the taskbar and select "Properties".
  In the menu that appears, check that the "Hide inactive icons".
  Click 'apply '.

  You can also customize this function according to your personal preferences.
  Click on "Customize."
  For each icon, select in ' hide when it is "Idle", "Always hide" or "show".

  When you are finished, click on apply, then OK.

  To reveal hidden at any time, click the "arrow" to the left of the notification area.

• Need help for my drive c:/directory of restoration after accidentally clicking on display the hidden files on my c: Program Files.

  Please help me to restore its original settings. I trieds a system restore which has been dated several hours before the event, but he was no help. Now it is a terrible mess, I can't find any of my files. I tried to remove a set of Origion through and the .xml file that I never found incidentally. And I thought that maybe it's a hidden file, so I decided to show the hidden files for 1 file but somehow he eventually go in the folder c: Program Files, and when he says that you want to show all hidden for this folder files I said yes. And then the team is down. I have no more recognizable files and filenames have changed not to mention there are now 1 folder with more than 10,000 files in there that I have no idea what to do with them. I can sometimes use the search engine on the start menu and locate the file I'm looking for, but if I try to go to the location of the file, it's just a mess when need me it I don't recognize anything that should be in this folder. So far it has not affected the performance of my computer just my ability to perfom tasks on my c: drive. If someone can tell me please how to restore to its correct state. I searched directory fixing programs watched through the forums watched even though windows has installed a magic button that would have but all the files in order and hide files that need to be hidden again. Help, please!

  P.S. If you need more information I'll glady it provide for anyone who is ready to help.

  Hey Bitterhouse,

  Check out this link, it should help you. If you can't make it work, please explain what was different in these steps on your system so that we can continue to help you.
  Thank you!
  Restore a previous version of the file

• Whenever I open Word 2007 I get the message 'Compileerror in the hidden module AZWizardModule.

  Original title: Microsoft Visual Basic

  Whenever I open Word 2007 I get the message 'Compileerror in the hidden module AZWizardModule.

  Can someone explain what this means please

  Hello rt00,.

  The reference to azwizardmodule season you have the Label Wizard Avery Dennison add-in for Word. Try to uninstall the add-in. If this
  solves the problem, you can try to reinstall, but if this then causes the error to return, you will need to uninstall again and get a
  update before you use it.

  Here are the the Microsoft KB articles that could help.

  KB Article ID: 328239 -' compilation in the hidden module error: hand "error message when you try to save a document in Word

  KB Article ID: 314127 -you receive an error message "Error in the module hidden compilation" in Word 2002 and Word 2000

  KB Article ID: 272066 -compile error in hidden module Tbrun97.xls in Excel

  KB Article ID: 307410 -you receive an error message "Error in the module hidden compilation" when you start Word or Excel

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Removal of the hidden Partition

  HI, I'm going to rebuild my system with Windows Vista, as it has been bundled with XP.

  In doing so, I considered the removal of the hidden partition.  If I delete it, will be I have only be removing the option to restore the default settings?  I did recovery DVD, so if this is the case, I should be fine.  I have will always have the ability to strike the thinkvantage button at start up and have some other tools that are there, such as diagnosis, or don't lose that as well.

  Thank you

  David

  I deleted my hidden also partition after recovery disks.   You can use the discs to restore everything, including the hidden partition if necessary.

  The removal of the partition information is here: http://forum.notebookreview.com/showthread.php?p=2367169#post2367169/

  An excellent guide to a clean install of Vista is here: http://forum.notebookreview.com/showthread.php?t=144783

  Good luck!

  -Paul

• Program runs in the hidden administrator account, but not the administrator account

  I have been using Altium Designer for about 5 months. One day, I tried Eun and got the error "dxp.exe has stopped working.  So, after trying a re-boot.  I have reinstalled the software.  At the end of installation, I get the message "the system administrator has set policies that prevent this facility." The installation then said that the installation has been completed successfully. I tried: unlock all files in the installation directory, run the installation as an administrator, the installation running on the hidden administrator account. Turn off UAC.

  The installation leaves me with a program which runs in hidden administrator but not nromal administrator.  Even if the install ation was made as normal anministrator.

  I am running Windows 7 Home premium, so the control of local security is not available.

  Thank you for your help ITKnowledge24.  Your post helped me to find parts of the program that I would never know that existed.

  It turns out that my problem was in two parts.  First what killed the software is primarily a print unrelated dirver.  (go figure)  Installation errors were caused because I downloaded the version recient most of the manufacturer's Web site.  When I reinstalled using the old version, the installation was without error.  The software starts to run correctly when the printer driver has been removed.  It seems that windows security was only a Kipper.

• Odd popup/after-setup windows named 'Hidden Start v2.1' as soon as windows loaded without a single click or action - hacked already?

  As soon as Windows loaded without further action or simple click, 3 popup/after-setup windows (all the same) named 'Hidden Start v2.1' (with some unknown ads) appeared. And they observed above all other applications.

  In any case, I was able to move to the sides and finally closed the.

  Although nothing (so far), is that my computer has been hacked already?

  Hello LeafPomelo,

  You can do a search in the registry for Hstart and see if you can find and remove from the registry.
  Go to the search box start. Type Regedit.

  If you get a guest user account control, click Ok.
  Click on edit in the menu bar.
  Select search.
  In the look for box, type Hstart, and then click the next button.
  It will show you the research register.
  If it finds all entries, you can delete the key.
  The executable file is hstart.exe.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

  NTWindows is the manufacturer of the software and have forums you can ask questions about Hidden Start.

  http://www.NTWind.com/software/hstart.html

  http://www.NTWind.com/Forum/

  I hope this helps.

  Marilyn

• On the start menu, the "Getting Started" application has no arrow to his right, his party!

  I'm using Windows 7 Home Basic 64 bit pre installed on my Sony VAIO. Whenever I go into the menu to start, the earlier application is still "Getting Started" and there always an arrow to its right. When I move the mouse on the "Getting Started", a submenu appears on the side still with applications like to experience Windows 7, customize Windows etc. After about 20 days (from the 1st day, I opened my new VAIO), the arrow is automatically spent.

  Can you please tell me why does this happen? All other applications as Word 2010 has its right arrow that shows me recently opened documents, but where is the arrow of "Getting Started" went? The last thing I do on my computer is the main application of Office Starter 2010 to open and install it.

  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, if your files are hidden, check out the following article on how to display the:

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• my "see the arrow of the hidden icon disappeared from my system tray. How can I get that back?

  I was trying to see the button 'remove hardware safely '. I tried a number of things on the option "see the hidden icon", like the keyboard on the touch screen. I would like to try something, apply, and cancel it. So, I tried the last option, the arrow "show the hidden icon" disappeared and I couldn't get it back.

  How can I get that back?

  for windows 8.1

  (1) open the control panel (right click on the windows icon [start] in the lower left corner of the screen and select "Control Panel" from the pop up menu)

  (2) type "notification" in the search box at the top right of the Control Panel window

  3) click "Notification area icons" in the the come up search results

  (4) at the bottom of the window that appears, uncheck the box that is always called "show all icons and notifications on the taskbar.

  Your "up arrow" ("see the hidden icons arrow) with the system status bar icons should reappear and filled with icons, giving you more space on the taskbar and a more pleasant and uncluttered appearance.

• Value of the hidden element escaped

  APEX 4.2
  
  Part of the hidden, page unprotected. Point of security settings: none listed, no session state protection, not encrypted, all characters allowed.
  
  On the design page load sets the value to a date (jj/mm/aaaa)
  
  What is the value of the element is used in a JavaScript apex.confirm message using and ARTICLE. the notation, the slashes in the value are escaped to & #x2F;
  
  Why is this? How can I get APEX to leave the only value?
  
  Thank you
  
  Did I mention that all these security settings few are starting to really annoy me? :-(

  Hi Vikas,

  they are intended to help you to create better applications, but I know what you mean. In this particular case, probably set you the application security attribute 'HTML escaping Mode' 'Extended '. This allows to escape more stringent than plain old htf.escape_sc. It is also the default value for new applications.

  Please do not use substitution in Javascript variables. They are more than exhaust HTML and cross-site scripting could be possible. Instead of

  alert('Value is &P1_ITEM.');
  

  You can also write

  alert('Value is '+$v('P1_ITEM'));
  

  Who are a little more character, but they are worth of typing.

  Kind regards
  Christian

  Published by: Christian Neumueller on November 28, 2012 09:15 (additional sentence on exhaust HTML Mode)