The HP Envy 17 laptop Quad t allows the base to extend HP xb3000 (docking station)?

Similar Questions

• Compatibility issue with the Portege 7020 / display CT 7200 & docking station

  Hi guys,.

  I have some problems with 2 cell phones.

  1 is:
  I bought a 7020 used to replace the broken of 7200 screen. After having disassembled the screen, I noticed that the connectors have the same number of threads, but one of the terminal of the 7200's screen has more. 'no problem' I thought, and with patience I picked up the cable of the adapter of 7020 one put in the 7200.
  But when I turned it on I saw only the colored lines and squares: S: S
  If you want I can provide with the NP, if it would help... Even if I check the compatibility before ordering.

  2nd problem:
  Portege 7200 correctly recognize the docking station, while a few beeps before starting the 7020, and obviously it does not work with him. I checked on the toshiba site and the dock would be totally compatible!

  And for the end... Where can I find the bios updates?

  Sorry for my bad English, I hope someone could help me!

  Kind regards
  Francesco

  Hello Francesco

  You'll be really lucky if someone here can help you with these old models of laptops. I'm sure they have about 10 years.
  No manual maintenance and sufficient knowledge is not easy to help you with this replacement of the screen.

  This problem with docking station may be related to defective hardware. The two laptops are so similar, and two of them can be used with this docking station. How you can be sure that equipment is high on 7020?

  The BIOS updates are available on http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp, but as I can see for Portege 7000 there is no updated BIOS, just to 7020.

  If you wish, you can contact the nearest Toshiba service provider. they have manuals for maintenance for this old notebooks and allow you to provide accurate information on the parts you need.

• Is it possible to connect the Qosmio F60 - L10 with a docking station?

  Hello

  is it possible to connect the F60 - L10 with a docking station? I would to connect to the docking station, a monitor and a peripheral such as a printer and a LAN cable.

  Thank you.

  Hello

  You cannot connect Qosmio for docking station because Qosmio includes not all ports docking at the bottom of the unit. Have you seen one?

  But you can buy a [Dynadock | http://eu.computers.toshiba-europe.com/innovation/generic/Dynadock_EMEA_0107/cnt/GENERIC/key/Dynadock_EMEA_0107/banner_id/Q3_DYNADOCK_SM_TEG_0107] Toshiba.

  The Dynadock can be connected to computer laptop s USB port.
  Google a bit for Dynadock. There are different models on the market

  Welcome them

• the update of the 2.2 defy had a docking station as the droids MODE option?

  Hi I was wondering if upadate motorola for challenges to froyo 2.2 has added a new feature DOCK MODE as the motorola droids can't, I saw my phone in standby mode once with a dock mode on it, but when I type it it is returned to the main screen, any ideas how I can turn this option?

  Thank you!

  Nothing should be plugged into the microUSB port, there is a magnetic sensor near the port that allows to the docking station. It may have just come up through error, but this is the way to activate it.

• T500 must restart to recognize the PCIe card in an advanced docking station

  We have worked through most of the problems with the upgrade of T43 T500 (2055 model), but has this annoying issue.

  We have maps Matrox M9140 PCIe installed in the advanced dock (model 2503).

  All the drivers are installed and they work very well outside this question:

  When the T500 is turned on in the dock, it will boot to the LCD screen.

  Only after restarting the computer laptop in the dock it will boot to the attached monitors.

  After this reboot to the dock, you can restart the portable computer as often as you like and it will perform properly in the Matrox.

  As soon as disconnect you, he seems to "forget" the start the matrox.

  Every morning that dock us the computer, turn on them, when the bios password is requested press Ctrl-Alt-Del and the boots of laptop for the Matrox.  Not a failure critical, but boring to do every day.

  We tried all the display settings in the BIOS, boot to screen LCD/PCI, discrete/switchable graphics, etc.

  Any of these solve the problem.

  Of course it's a BIOS problem, because it never gets to the loading of the operating system.

  Thanks in advance for any response.

  Figures...

  I searched before posting, but just found a thread that deals with this:

  http://forums.Lenovo.com/LNV/board/message?board.ID=T400_series_ThinkPads&thread.ID=8409&view=by_dat...

  It's a shame that this defect is not addressed.

• HP ENVY 14 LAPTOP - cannot change the color of the menu of win 7

  Right now I know it is a HP support forum but I have a HP laptop and desktop and I really hope someone here can help me really...

  Good one a few months ago I bought a HP Envy 14 laptop and I must say that I really liked it. Then a few days ago, I just bought a HP desktop computer (can tell you I'm a fan of HP) and I love it also.

  Here's my problem...

  On my desk, I decided to change her look, so I installed a custom theme (dark theme) and it changes the appearance of windows 7 and changed the color of the lower menu/taskbar of windows 7 in black and I really liked it. I decided to install this theme on my laptop and everything has changed except for the background color of menu/taskbar of windows 7 botom. For some reason any will not change the color of the menu bit matter what I do.

  I tried to go to:

  Panel-> personalization-> change the color of window glass

  and by selecting a different color but not matter what color I select windows 7 background menu/taskbar does not change it remains just the grayish color of say her since I got the laptop.

  Now, why this work on my desktop but not on my laptop?

  There must be a setting on windows 7 that prevents me to change the color of the lower menu/taskbar. Still worse firefox is horrible. I can not change the appearance of firefox, whenever I have try and install a new firefox theme does not change. On my desk, I installed a dark theme for firefox 11 (the Nasa Night Launch) theme and it worked very well but for some reason any on my laptop, nothing seems to work just...

  I really hope that someon can help me with this because it makes me crazy...

  I want to thank you all for your time and help,

  gh0st-HP

  DragonFur, I want to thank you for your time and your answers, you should know that it meant a lot to me.

  After doing a lot of work and trial and error, I finally found a solution to this problem...

  I did a lot of googling and research and what I found is that there are many people out there who are owners of laptop HP Envy 14 who have trouble changing the color of their windows 7 start menu/taskbar or with the taskbar is not not transparent.

  Here are some of the things I tried.

  1 Installing different themse (did not work)

  2. Update driver for ati radeon 5650 graphics card (did not work)

  3 tried to adjust areo ensuring transparency has been activated (did not work)

  4. tried to bios update (did not work)

  5 tried to use a program to change the color of the bar tasks (did not work)

  What I ended up doing is creating a new user to the administrator and when I created this account is a program called "stardock mypaint" come asking me if I wanted to use this program to change the original theme for windows. When I said this software to change the original theme of windows 7, it changed my taskbar to the greyish appearance, it was the same off-white color I had on my account I tried to change. So I went back to my account and I searched for the program "stardock mypaint" and I have disabled this theme and then he changed my windows operating system 7 to an original blue theme but the taskbar was transparent! Then I went into my themes and changed the theme I wanted and my taskbar has changed color and transparency! Needless to say I was so happy.

  I really hope that this post will really help someone else who is trying to solve this problem...

  HP I really hope that maybe you guys can watch this program "Stardock MyPaint" which I think may be for HP Envy 14 laptop computers and allow users to know that the use of this program can affect other issues.

  Isn't funny how the solution to the problem is always the simplest answer...

  I knew there was something in the windows that kept my taskbar to be transparent and changing colors and it turns out it was a program of HP.

  Yet once I really hope this helps someone else out there and I'm hoping that HP employees this will read so maybe they can help each other if someone falls on this problem.

  DragonFur, thanks again for your help...

  gh0st-HP

• HP 650: NZ222AA docking station is compatible with the 650 hp?

  Hi all

  My laptop is hp 650.

  Can I use NZ222AA docking station?

  Thank you in advance...

  Hello

  The NZ222AA is not for 650 HP, because is not docking connector.

  For more information consult the page 24 QuickSpecs:

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04111464

  The 650 HP allow only this expansion of solutions:

  HP USB 2.0 Port Replicator H1L07AA 2005pr (this isn't a statition to home, it is a Port Replicator)

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04155381.PDF?ver=16

  HP dual hinge Notebook Stand AW661AA
  Notebook and Display Stand AW662AA HP
  http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04164171.PDF?ver=7

  Concerning

• An adapter that enables the new ipod touch be played on an old docking station for what they do?  I'm not tech savvy... any help is appreciated!

  Is there an adapter that will allow you to listen to music using the new ipod touch on a docking station that have the card that fits the older ipods?  I'm not warned, any help would be greatly appreciated.

  See http://www.apple.com/shop/product/MD823AM/A/lightning-to-30-pin-adapter.

• The m7 HP Envy laptop: docking station connector

  I bought the computer laptop hp envy m7. It is not compatible with the connector for my docking station, HP xb3000 notebook expansion base. Is there an adapter for the expansion base to the portable Envy? Is there a docking station for the HP Envy laptop?

  Thank you

  Bryan

  Hello

  The m7 envy laptop does not therefore docking port, you will need to use USB docking port. There are many ports of USB docking around such as:

  http://www.Amazon.com/HP-Replicator-docking-H1L08AA-ABA/DP/B008KMDVME

  (HP store says there are 11 products but the site is inaccessible, you can wat to get a complete list

  http://store.HP.com/us/en/MDP/accessories

  Kind regards.

• HP ENVY 17-J020US: could not find the drivers for my HP ENVY 17-J020US Quad Edition

  Hello

  I have a HP ENVY 17-J020US Quad Edition and I'm looking for "Intel HD Graphics Driver". The Support page and House HP driver heading the wrong driver and HP support was no help. The graphics card is an Intel HD Graphics 4600. Operating system is Windows 10-64 bit updated since Windows 8.1. Any help would be greatly appreciated... Thank you

  I rolled back to Windows 8.1. It's not worth the hassle, but thank you for your suggestions. My main problem was, I couldn't open RAW files in Photoshop using the GPU. This occurred after the upgrade to Windows 10 so I decided to go back because all the drivers that you mentioned, I already had on my system. Thanks again for all your help and Merry Christmas.,.

• ENVY 15-j059nr Quad Edition No.: hard drive DST short test failed

  My laptop HP ENVY 15 - j059nr Quad Edition PC notebook does not start. I ran diagnostics test quick HP UEFI using ESC + f2 to restart, the hard drive failed the short DST test with failure code 64NC9H-6TA85K-MFGJWK - ST 60, 03. What does this code mean.

  Hello

  Yes you can.

  Kind regards

  DP - K

• HP ENVY - computer laptop 17 t: HP ENVY - 17 t portable hard drive

  I ordered the HP ENVY - computer laptop 17 t with 4 TB 5400 RPM hard drive double, it is understood that the hard drive must be 4 TB? I understand? So why is my computer can see the C drive and 2 TB to 15 GB drive, where an another 2 TB?

  H397724166 my order number

  Hello

  Yes takes 2 TB + 2 TB (actually 1.81 TB and 1.81 GB). On my machine ready Envy 17 t, I got SSD 256 GB for C: and D: 1 to. Please contact point of sale, this forum is fo you and me, we can not help more. But before that, see File Explorer to see how many records

  

  Kind regards.

• HP Envy 17 laptop pc Screencolors are washed out

  Product name: HP ENVY 17-j027cl notebook PC
  
  Product number: E0K96UA
  
  8.1, update 1, 64-bit Windows
  
  Control Panel > display > calibrate color > n Option is no longer available
  
  Control Panel > display > change display settings > Resolution 1600 x 900 (recommended)
  
  Control Panel > display > avancΘs > monitor generic PnP and Intel(r) HD Graphics 4000
  -Graphics adapter Type 4000 HD
  -Monitor > generic PnP monitor
  -Color management >
  -Set the monitor at its Native resolution (cannot change beyond 1600 x 900)
  -To adjust brightness and contrast
  
  Intel HD Graphics Control Panel > hue: the color slider is set up to the left (0)
  Intel HD Graphics Control Panel > Saturation: Slider is midscale clockwise (-16)
  
  http://www.Intel.com/support/go/GFX/DL.htm

  Found and tried to apply the Win64_153318.exe on the Web site for my Intel 4000 Graphics Intel Graphics hardware. It could not install, with the error message is not for my system (it has been clearly stated Intel 64-bit, Intel(r) HD Graphics 4000.

  Found drivers HP Envy, SP63750.exe, Version 10.18.10.3304, dated November 8, 2013. Do no noticeable change.

  In some cases, I could get color acceptable to a mode (file JPG look at one), but unacceptable for display on the screen.  I tried the mode high contrast, but yuckk, made the screen really hard to keep up with all these text boxes, like watching a brick wall.

  If I look at the same files with my Netbook (Win 7 update) mini 1101, the graphics are really normal colors and contrasts. (Maybe the drivers I screwed up when I had sent for repair to the HDD/MoBo). I have not tried a total reset, and yet, it's always such a pain to do a reset to see that it of a hardware fault or not. Yechh

  Any help for a reboot to get my colors and contrast back to normal?

  Bearly

  First of all, the only Solution that is available (on the present four), Option 3. None of the other options had these functions), in this Envy 17 laptop.

  Although I had found another Option (which maybe you can integrate in Option 5), but remained elusive to me because part of my exploratory solution, the taskbar had large icons and the taskbar hid the 'Next', 'Cancel' buttons on the pages of process,

  The simple shortcut to my solution is: Control Panel > display > calibrate color: see 'Welcome to display color calibration.   I went through the correct colors calibrate the color Process andgotmy back.

  By default, option 3, transforming the 'sensor Monitor Service' is an employment status empty (early release) illustrated. This option seems to be a 'do nothing option. In my case, I can't thank you for trying, butnone of Options seems to work for me.

• Envy 15 laptop: picture library on start display

  My screen start done scroll only 4 pictures although there are many more pictures in my library.

  How can I increase the number on the screen?

  Any help please?

  Thanks Douglas

  Hi @connelsey ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Envy 15 laptop and issues with the slideshow of the start screen. Here's a link using Microsoft with Photos.

  Open the app Photos Swipe in the right edge of the screen, and then tap Settings.
  Tap or click Options.

  Set Shuffle on Photos of tile photos to it.

  Make sure that all the pictures are saved in the same place as those that are read.

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.

  Thank you.

• HP ENVY - computer laptop 17 t: HP ENVY - it laptop

  I guess that my HP ENVY - computer laptop 17 t is not the capacity of DVDs to create Lightscribe labels. Can someone cnfirm this?

  Hi @bakerla,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP Envy 17 laptop t and problems or questions about the Lightscribe working with your laptop. Thank you for your interest in LightScribe disc labeling technology. It is no longer available since November 26, 2013. My apologies.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.