The initialization of the swap file to virtual disk periodically (40% of the time +/-) fails to start Windows
Greetings-
For the past year or so I put my Windows 7 32-bit, 8 GB RAM system to initialize the page automatically on a virtual disk file (in order to reduce the physical disk reads/writes and to speed up the access to the page files).
Here's how I set up: I installed Dataram Ramdisk and configured to use memory beyond 4 GB (which, as everyone here knows, 32-bit Windows can not otherwise use) as the ramdisk. In setting up manually formatted the 4 GB unallocated space virtual drive as an NTFS volume and it gave the letter a: (what else!). Then I got the software save an image file of the ramdisk formatted my hard drive F:. Additional configuration of the software wants to initialize the virtual disk to start and immediately copy the image file to the virtual disk, thus creating a 4 GB NTFS formatted volume a:. (Incidentally, I also use the virtual disk to the cache of the browser and the print spooler). The theory here is flawless. But to make it work in practice, the virtual disk must be initialized and the image file copied into ramdisk (making it a formatted disk R :) front Windows initializes the pagefile.
It runs about 60% of the time, but for the remaining 40 percent Windows gives an error message indicating that Windows has created the page file in a temporary location (it's always the C: drive, the pagefile in general where default.). The only reasonable explanation I see why it fails is that, for nearly 40% of my computer boots window wants to initialize the page file before the ramdisk is ready to receive. What I don't understand is why that happens.
This happen to my main question: is it possible to control the Windows boot sequence so that the ramdisk is initialized and the filename of the image copied to him on a basis consistent before Windows wants to initialize the page file? Operationally, I guess it boils down to whether it is possible, during each startup sequence, to delay initialization of the page files or to move the virtual boot record earlier in the sequence. If so, how to do that? If not, can someone explain why the order of the respective boots usually works, but does not reach a good amount as well?
Ideas on this would be appreciated.
RAS43
Create a small paging file to 20 MB on the boot volume (the partition where the Windows files are installed) this way the session manager will be able to start the Windows session and create additional paging files without complaining. You can have more than one paging on several disks, Windows will favour the less busy the disk paging file.
John
Tags: Windows
Similar Questions
-
Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »
UM. I have no idea what that means, I never had that in my 20s I was using a computer. Please help, someone!
You can get the Chkdsk to run in the General Windows interface by following these instructions?
Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.
Your command prompt Mode works without failure or a boot?
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-modeHow to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135It works if you test with another user, you will need to create one to test with?
System Restore and the System File Checker is able to fix anything?
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
http://support.Microsoft.com/kb/936212/#appliesToHow to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
http://support.Microsoft.com/kb/928228#appliesToHave you tested malware? I see a lot of recommendations here for programs such as -
Malwarebytes' Anti-Malware
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntispyware
http://SUPERAntiSpyware.com/ -
Original title: cannot open programs
I get this message when I try to run any program on my windows vista operating system: the application failed to start because its side-by-side configuration is incorrect please view log events applications for more details. I can't open any programs or files associated with programs IE Miicrosoft Office), any help would be sufficient. Please make your suggestions VERY user-friendly. Thanks in advance.
Hi KenKenJr,
1. are you faced with questions only when you open Microsoft Office programs?
This error can occur because of a corrupted Microsoft Visual c++ installation.
Step 1:
If this error occurs only when you try to open the Office programs, you can check the following link and check if that helps:
Step 2:
To resolve this problem, you can also install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:
Download and install Microsoft visual C++ from the below mentioned link:
Package redistributable Microsoft Visual C++ 2010 (x 86)
Package redistributable Microsoft Visual C++ 2010 (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867
For more information, you can consult the following link:
Hope this information is useful.
-
Original title: side-by-side configuration is incorrect
When I opened, try opening some emails. doc or pdf, this msg appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »
I'm going to log events, but how to solve the problem by putting the RIGHT configuration to?
Thanks in advance
Hello
1. when the question is is produced?
2. you remember of any change to your computer before the problem?
3. are you using a 32-bit operating system or a 64-bit?
Please visit: What are the information in the event logs? (Event Viewer)
In the meantime, follow these steps and check if they help.
Step 1:
I suggest you install the Visual C ++ 2005 Sp1 Runtime and check if the problem persists:
Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)
Step 2:
If this does not resolve the issue, I would have you done SFC scan on your machine to check if the problem is related to missing or corrupted system files.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.] -
«WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»
This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.
I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.
I don't know what to do.
Hello
You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
Method 1:However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Method 2:You try to run the fixit given in the following link and check if it works:Method 3:You have recently updated with Microsoft Visual C++?I hope this helps! -
Hello
I get the following...
"The application failed to start correctly (0xc0000005). Click OK to close the application. "
Please help me with suggestions?
Thank you
Dimitri
Hello
Thanks for posting the question on Microsoft Community Forums. According to the description, you get an error message "', the application could not start correctly (0xc0000005)." Click OK to close the application"when you try to open Microsoft paint. We will analyze and identify the cause of the problem.
1. are you aware of changes to the computer before the show?
2. is it limited problem specifically with Microsoft Paint?
I suggest you perform the steps:
Method 1:
Put the computer to boot and search for the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, follow step 3 in the article by putting your computer to normal startup.
Method 2:
Perform a SFC scan on your computer. Consult the following link:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Hope this information helps. Please respond with more information about the issue so that we can help you.
-
It worked initially, but now it does not work
now every time I try to go on the youcam, a box appers and said
"the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. »
I need help to solve this problem
Hello
You did changes to the computer before the show?
Method 1: I suggest that you run the SFC scan and check if this solves the problem for you:
http://support.Microsoft.com/kb/929833
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
Method 2: Perform a disk check, follow the steps below:
1. open the computer by clicking the Start button, click computer.
2. click on the drive you want to check, and then click Properties.
3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.
To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
Method 3: Update of the .net Framework.
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22
Method 4: You can also try the steps from the link that addresses a similar issue:
Check the Event Viewer for related the question paper.
-
Original title: the application failed to start because its side-by-side configuration is incorrect
I use Quicken 2010 for a couple of years, and suddenly it stopped working with the error in the subject line. I uninstalled the program completely,
re-installed and got the same error. (I am running Windows 7 64 bit and help Quicken was not particularly cooperative.) So, at the suggestion of someone, I ran a SxSTrace and got the following report, which I find incomprehensible. If it points me to a solution, maybe someone could help me with it:=================
Launch the activation context generation.
Input parameter:
Flags = 0
ProcessorArchitecture = Wow32
CultureFallBacks = en-US; en
ManifestPath = C:\Program Files (x86)\Quicken\qw.exe
AssemblyDirectory = C:\Program Files (x 86) \Quicken\
Application configuration file =
-----------------
INFO: Parsing manifest file C:\Program Files (x86)\Quicken\qw.exe.
INFO: Manifest definition identity is (null).
INFO: Reference: Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8"
INFO: Reference: Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8"
INFO: Resolving reference Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8".
INFO: Resolving reference for ProcessorArchitecture WOW64.
INFO: Resolving reference for the neutral culture.
INFO: Application binding policy.
INFO: No found publisher policy.
INFO: No redirect political connection is found.
INFO: Start the detection of assembly.
INFO: Can't find the assembly in WinSxS.
NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT\9.0.21022.8__1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.DLL.
INFO: Found no manifesto for the neutral culture.
INFO: End detection of assembly.
INFO: Resolving reference for ProcessorArchitecture x 86.
INFO: Resolving reference for the neutral culture.
INFO: Application binding policy.
NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_f480bfaef65491a5.manifest
NEWS: Policy redirected assembly version Editor.
INFO: The Post policy assembly identity it is Microsoft.VC90.CRT, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.6161".
INFO: Start the detection of assembly.
NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57.manifest.
INFO: Manifest found at C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57.manifest.
INFO: End detection of assembly.
INFO: Resolving reference Microsoft.VC90.CRT.mui, language = "*", processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.6161".
INFO: Resolving reference for ProcessorArchitecture WOW64.
INFO: Resolving reference for the en-US culture.
INFO: Application binding policy.
INFO: No found publisher policy.
INFO: No redirect political connection is found.
INFO: Start the detection of assembly.
INFO: Can't find the assembly in WinSxS.
NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en-US_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
INFO: Found no manifesto for the en-US culture.
INFO: End detection of assembly.
INFO: Resolving reference for culture.
INFO: Application binding policy.
INFO: No found publisher policy.
INFO: No redirect political connection is found.
INFO: Start the detection of assembly.
INFO: Can't find the assembly in WinSxS.
NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
INFO: Did not manifest for culture.
INFO: End detection of assembly.
INFO: Resolving reference for ProcessorArchitecture x 86.
INFO: Resolving reference for the en-US culture.
INFO: Application binding policy.
INFO: No found publisher policy.
INFO: No redirect political connection is found.
INFO: Start the detection of assembly.
INFO: Can't find the assembly in WinSxS.
NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en-US_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
INFO: Found no manifesto for the en-US culture.
INFO: End detection of assembly.
INFO: Resolving reference for culture.
INFO: Application binding policy.
INFO: No found publisher policy.
INFO: No redirect political connection is found.
INFO: Start the detection of assembly.
INFO: Can't find the assembly in WinSxS.
NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
INFO: Did not manifest for culture.
INFO: End detection of assembly.
INFO: Resolving reference Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8".
INFO: Resolving reference for ProcessorArchitecture WOW64.
INFO: Resolving reference for the neutral culture.
INFO: Application binding policy.
INFO: No found publisher policy.
INFO: No redirect political connection is found.
INFO: Start the detection of assembly.
INFO: Can't find the assembly in WinSxS.
NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.MFC\9.0.21022.8__1fc8b3b9a1e18e3b\Microsoft.VC90.MFC.DLL.
INFO: Found no manifesto for the neutral culture.
INFO: End detection of assembly.
INFO: Resolving reference for ProcessorArchitecture x 86.
INFO: Resolving reference for the neutral culture.
INFO: Application binding policy.
NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.1_none_7dd1e0ebd6590e0b.manifest
INFO: Start the detection of assembly.
INFO: End detection of assembly.
ERROR: Activation context generation failed.
End activation context generation.Good news! After removing and reinstalling the software appropriate to Visual C++.
Quicken is again functional and, even better, after all uninstalls and installs the last days, my connection to my Bank to download transactions is still in place.
Thank you -
Original title: WINDOWS 8 - ask suddenly won't open at all.
I have installed on my VAIO, MediaGo and I use it quite frequently, but last week, he refused to open, display the error:
"The application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. »
I have, since the application stopped working, used guest to detect and remove the corrupted my computer files using the sfc/scannow command and the dism / /restorehealth/cleanup-image online, but the problem persists.
I tried to watch the event log AND gave the sxstrace.exe tool a shot, but it is useless, I have no idea what to do. I googled nothing helps...
I would really like to get the matter sorted quickly, and any help would be welcome!
Hi Sandra,.
You can download the latest version of Visual C++ from the following link:
http://support.Microsoft.com/kb/2019667/en-us
http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679
Please let us know the status of this issue.
-
I have no pointing device or the keyboard when I start Windows XP.
Original title: no pointing device or the keyboard when I start windows XP How can I fix this or restore my computer to an hour early when it was working properly
I have somehow deleted my system usb hub. I am running windows xp with a microsoft intellitype pro5.0 & intellipoint 5.0 but when I boot I have no mouse or keeybord how can I fix this or dine at an early hour when everything worked correctly? Can someone help me please your? I would be grateful and appreciate your help ending my thanks in advance.
Hello
Try the methods provided below and see if they help to resolve the issue.
Method 1:
You can follow the steps of troubleshooting provided in the link below to solve the problems with USB devices in Windows XP.
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575
Method 2:
You can try the steps in the link below to restore the Windows XP computer to a previous state.
How to restore Windows XP to a previous state
-
I can connect with the Administrators account without starting windows in safe mode and if yes, how?
If I ca not, how can I load the graphics in safe mode drivers as all graphical interfaces are not displayed correctly.
Thank you, Andre
If XP Pro using the Welcome screen, press CTRL + ALT + DELETE to bring up the classic login box. In the connection box, type the administrator user name and password. Boulder computer Maven
Most Microsoft Valuable Professional -
"The application failed to start because its side-by-side configuration is incorrect."
original title: Please answer me
Hello, I just downloaded yahoo Messenger 11. I have windows vista, and the installation went well. Now, whenever I try to start it, I have a Kaspersky Anti-virus program. As you approach the end of the installation of the program, a warning box appears, through a program of protection and on the inside, there are three options, I already tried all that, and then I get this error: the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. Any help is appreciated. Thank you, raed - zyd
You might also have a look at the following thread replied:
-
I just tred of age epires onlin facility but he know "the application failed to start because its side-by-side configuration is incorrect. Please check the event log... »
Hello
See this link:Let us know if it helps.
-
live Messenger window do not pronounce it says: the application failed to start because its side - side configuration is incorrect
Hello
they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums
-
How can I reset the time and date on Windows Vista?
How can I reset the time and date on Windows Vista
http://www.ehow.com/how_2056384_change-date-time-Windows-Vista.html
http://www.Vistax64.com/tutorials/114989-date-time-change.html
Read the information in one of the links above.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Download firmware ios through itunes.
If I want to download ios on my device using itunes and then I want to disconnect my device from itunes, the download process stops or it will continue?
-
HP Pavilion Dm3 Notebook PC: hard disk Check Fail
Hello Currently I have problems with my PC. When I start at least 95% of the disk is used. I run a disk check test on which startup fails to provide me the code error 9C0FL4-50886J-XD7Q21-618303. Also when I am invited, through the support site, to r
-
Install SP3 blocks Pavilion dv2100 with CPU intel.
Just unpack, pilot are inventoried, but almost immediately after execution of the treated pre-installation Blue computer screens. Enter the file svcpacvk.log, the last executed process was fixccs.exe.The coomputer also has the symptom of comes not f
-
How to overcome error * stop: 0X0000007b (0xf78d2524, 0xc0000034, 0x00000000, 0x00000000)
Hello.. I'm editing O. S XP for my laptop of Lenovo ideapad Z560 after reformulating BIOS and copy the files over and before the program installation the following error will come (it has no virus in my laptop). the error is: * stop: 0X0000007b (0xf7
-
printer indicates paper jam carriage, how to fix?
I have a Photosmart C4795, printing, scanning, copying machine and has print a map of wishes and the first page printed correctly. the second page does not have the print window and printer showed transport jam. I took on the back and can see nothi