The input microphone and WEBCAM microphone don't work

Similar Questions

• Bank of Scotland pages have lost the scroll bar and Page Down don't work either. they say it's a problem with Mozilla! So, how to navigate to the bottom of

  The Bank said it isn't a problem with their Web site, but with the browser. There is no way to access the bottom of the page, so you can not pay the invoice online because you cannot access the button pay.

  You may have switched to the keyboard navigation.

  • http://KB.mozillazine.org/accessibility.browsewithcaret

  You can activate or switch by pressing F7 keyboard navigation (Mac: fn + F7).

  • Tools > Options > advanced > general > accessibility: [] "always use the cursor keys to navigate through the pages."

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Hi, I have vista Home Premeium, 32 bit, I got the flash player and now I don't have,

  Hi I have vista Home Premeium, 32 bit, I got the flash player and now I don't have, I installed the uninstall program and ran and reinstalled flash player, I've done this about flash player 6 times and SO I closed all the sercuity, but nothing helps. Help, please...

  Hello CalvinJones,

  Look at the post on the Adobe forums to see if the suggestion he help.
  http://forums.Adobe.com/message/3558717?TSTART=0

  Thank you

  Marilyn

• I disabled the magnifying glass, and I still don't see the entire image or a page on the site

  I turned off the magnifying glass, and again, I don't see any page or photo that I need to see. Example;... I play Farmville on Facebook and I see all the options or boxes, on the page of game.

  I turned off the magnifying glass, and again, I don't see any page or photo that I need to see. Example;... I play Farmville on Facebook and I see all the options or boxes, on the page of game.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  For example, 640 × 480 is a lower screen resolution, and 1600 × 1200 is higher. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768. LCD monitors can better support the higher resolutions. If you can increase your screen resolution depends on the size and capability of your monitor and the type of video card you have.

  Text and images are sharper and smaller at high screen resolutions
  Text is larger and easier to read at low screen resolutions, but images are rasterized and number of items adapted to the screen

  1. Open display settings by clicking on the button start , by clicking on Control Panel, appearance and personalization, clickingPersonalization and then clicking display settings.

  2. Under resolution, move the slider to the desired resolution, then clickApply.

  

  Notes

  • When you change the screen resolution, it affects all users who log on the computer.

  • When you set your monitor to a screen resolution that it will not support, the screen will go black for a few seconds while the monitor returns to the original resolution

  See you soon.

  Mick Murphy - Microsoft partner

• When I installed for the first time the creative cloud I did not fit into the second computer and now I don't know how to do this. Can someone help me?

  When I installed creative cloud for the first time I was not installed in the second computer and now I don't know how to do this. Can someone help me?

  Hello

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

  Moving to the cloud creative download & install

• I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  Suggestions?

  I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  What is the best solution?

  Thank you for your message.  I'm finally hung up with Adobe cat and after about 2 hours, the problem has been resolved.  Part of the problem was a corrupted Microsoft files.

  Ed

• Satellite L750 - to change the input Mic and Line In

  Hi, I have a Toshiba Satellite L750 running Window 7. I have a small studio in which I have a mixer connected to a drum kit.

  On my old Toshiba Satellite C660, when I plugged it to the output of the mixer to the microphone, a pop box port up appeared asking me what I had just plugged.
  I chose Line In and everything was fine

  With the L750, I get no such box and the computer just treats it as a microphone, as it compresses everything from the port.

  I tried the Smart Audio installed in the control panel and it does nothing. Is there anywhere that I can choose the socket is treated as Line In, no microphone.

  Getting boring now!

  Thank you

  > On my old Toshiba Satellite C660, when I plugged it to the output of the mixer to the microphone, a pop box port up appeared asking me what I had just plugged.

  Yes, but the Satellite C660 was equipped with a microphone / lin in the port.
  Are you sure that your L750 supports a combi jack mic / lin in?

  You can find the description in the user manual.

• Shift + Ctrl + T doesn't work anymore. I tried uninstalling and reinstalling and it still don't work. I can't find the other answers.

  Today, I noticed that open a closed tab previously not working anymore. This feature is crucial for my work. I tried to uninstall Firefox and reinstall and it did not help. Under history, recently closed recently closed tabs, windows and are grey. I have my story to remember settings.

  I don't know what the problem is and I need to my Shift + Ctrl + T return.

  Your list of details of the system shows that you have defined two preferences that control the restoration of closed tabs and windows are set to 0:

  • Browser.sessionstore.max_tabs_undo: 0
  • Browser.sessionstore.max_windows_undo: 0

  You can reset all browser.sessionstore. * prefs that appear "BOLD" (user set) to the default via the context menu.

  You can check if you have a user.js file in the Firefox profile folder that sets the prefs as pref browser.sessionstore.resume_session_once true.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  Note that your list of details of the system shows that you have a user.js file in the profile folder to initialize some preferences at each start of Firefox.

  The user.js file appears only if you or another software created, therefore, normally, he wouldn't be here.
  You can check its contents with a text editor if you do not create this file yourself.

  The user.js file is read whenever you launch Firefox and initializes the preferences to the value specified in this file, so set of preferences via user.js can be changed temporarily for the current session.

  • http://KB.mozillazine.org/Preferences_not_saved

• What is the relationship of synchronization between the input MUX and the clock to convert DAQmx

  My application requires both long settling for the analog input.  I can slow down the clock to convert in order to increase the interval without but I would like to learn more about the internal synchronization and synchronization between the switching of input MUX and the clock to convert.  Data acquisition is USB-6225.

  Thank you

  Neville

  wet'nwild,

  You have reason in the observation that hold all the impulses of the event happening 180ns after convert rising edge clock, regardless of the period of the clock to convert.

  This is the process:

  1. the clock Convert generates an impulse to start the ADC conversion.

  2. a period of time (in your case, 180ns) after the clock pulse to convert, the complete signal hold impulses. This indicates that the data are "required" by the Active Directory Connector. It is now OK for the MUX switch to the next channel. It is important to note that the ADC conversion is not complete when the pulse hold full occurs.

  3. at this stage, the MUX will pass and the device will wait for the next clock pulse to convert for the start of the next conversion.

  In summary, this means that when you change the period to convert clock signal, the complete signal hold flashed always the same fixed amount of time after the edge of signal clock convert. The complete signal Hold'em is not a good indicator of break-in; the width of the period to convert clock must be waiting time indicator (which looks you determined you're previous posts). A good application for the signal keep complete would be for an application where there is an external multiplexer and the multiplexer needs a signal indicating that it is OK to switch the inputs.

  I hope that helps clear up any uncertainty that you have about how it works!

  Kind regards

  Aaron

• Use fault strategies to get the input variable and call a new service.

  Hello

  I have 2 composites that are the answer to the request. If none of these composite gives an error I want to have policies to correct this fault. Is possible to obtain the input of the first variable composite and call a new service with this variable to handle the error?

  Thank you

  Daniel

  I found the solution here:

  With the help of mismanagement in a BPEL process

  Using the method getVariableData to get the variable I want.

  Kind regards

  Daniel

• is there a way to make the game with the input field and interact with the answer (createjs)?

  Hello

  createjs is great, but I think it's a bit limited by a full game as to put your name and lunch the game or the question precise response, then you can trigger an animation

  I searched the web for this behavior in easeljs but no luck

  the question is is it possible if yes can you provide an example

  Thank you

  It's my favorite workflow and I guess that's idiosyncratic.

  I prefer the javascript/jquery code in sublime text and not the flash because of the set color id shaped sublime text and because I like or need to have both the js a html files open at the same time to edit both.

  I'm usually all code of easeljs and graphics in the flash ide and when it's over, I work directly with html and js files in a sublime text to manage things that you can't do in flash.

  I don't see a big advantage for that in this situation so I understand the quibbles, but in some situations (for example, right left text), it is much easier (for me at least) to edit, debug and test outside the flash id.

• After updating, my forward and back arrows don't work, as well as web addresses are not displayed on the address bar

  I am on Windows 7 eternity / I've updated to Firefox 6, since then I couldn't use the front and rear, that it is not not a page Web address appears on the bar, these two problems are on the navigation bar, and both worked fine before the update. I've since updated to Firefox 6.0.2, but problems remain. It's very frustrating, I tried to find an answer to this, but nothing helped. I tried uninstalling and reinstalling, but no change, I tried to go back to an earlier version, but no change, right now with Firefox 6.0.2 but no change. I also have a computer with Windows XP, with the same version of Firefox, but it works OK

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• my computer has a virus. I took it to get the virus removed and now I don't have my family vista premium there Home Basic

  my computer has a bad virus and I had cleaned it but now my family vista premium is not on that but Home Basic is. I tried to activate with the numbers on the side of my computer, but he says that's not good. His NY will not come on either. I went to the trouble and he told me to plug my speakers that have been connected

  Hello

  Take it back to the one who fixed it and demand that they fix it correctly by reinstalling correct Vista edition. namely Vista Home Premium;

  _____________________________________________________

  We cannot help you help to activate the version of vista evil with your home premium product key

  It will not work

  _______________________________________________________

  If you have no luck with the one who fixed it, you need to reinstall vista Home premium yourself or contact a computer technician known to do

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and has already done.

  I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

  You cannot uninstall a running operating system.  The best you can do is wipe the hard drive and start over, but which will also remove all programs and documents.

  "malayboy" wrote in the new message: * e-mail address is removed from the privacy... *

  I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

• AND and NAND gate don't work well when used with 74LS193N

  When I use AND or NAND to work with 74LS193N, that it has not produced the result that I expected. Please see my download folder. I use AND and NAND gate to switch my FF JK when my 74LS193N give a 1001 signal but my FF JK switch before that when my 74LS193N produce a 1000 signal then it then it switches again when the 47LS193N product 1001. According to my observation he just to produce the signal in a very short time, this signal is able to pass through the NAND and AND farm at triggle my JK FF. I know this sholdn can't be happen. I thought that the signal that I spend when both inputs are high, I tried and NAND with any other logic gates so far its fine, so I don't have this problem hope someone can help me. For this reason all my work unable to design, it bothers me a lot...  Help!

  I guess I'm confused as to why you would use a generic part instead of parts 74LS00/08.  What you see are the differences in sync settings.   If you double-click on the door AND generic and press to edit the template, you will see the rise and fall of delay is 1nS.  If you place a 74LS08D and do the same thing, the delay of climb is 15nS and fall time is 20nS.   More likely, there is a setting of high spice for the counter where the QD line passes for a very small amount of time while the QA, QB, and lines QC transition from high to low.  The real AND doors NAND can't see this transition delays inherent in the real part spread (rise and fall).  If you change the values of the generic parts to that of the actual element values, the circuit should work.