The installation of the factory restore

Similar Questions

• K1 "unrecoverable error bootloader (0 x 19000008) after the factory restore".

  Having some problems with my K1 for a while & finally decided to do a factory restore and start over. Fact the factory restore (exactly like I had to with my android phone a couple of weeks) & now he jumped to the top with

  «Erase Userdata...»

  Boot loader fatal error (0 x 19000008)

  He sat there for a while. I tried to hold the power button, but nothing. This tablet has been updated to the latest version, it has not rooted or anything else. Just completely factory & updated. The problems I had when I decided to restore it was running mostly just super slow. Took forever to get the apps to arrive on the screen & such things. Thought I just having too much junk previously installed on it, so I tried to restore it & start over. Bad idea! Any idea? My 2 weeks im slammed all day every day & cant slow to call assistance & wait always hold to try & fix it (assuming that they can even repair). Would be delighted to hear that its an easy fix but I'm sure used to be the case. I bought it back in November 2011, so its only 6 months old.

  Hi Javahead

  How many times have you tried to restart since this error?

  Recently, I did the same thing after that my front cam went wrong. I got the same error. But after a few reboots and maybe wait a few minutes before trying again. Finally, he went through the process and completed successfully.

• 1211 error when you try to perform the factory restore.

  Original title: I need to.

  My computer is running very slowly, I want to go back to its factory settings so I would have as its new brand, but when I go to install it I get an error 1211 or something like that. I need help with this. C:\$win_nt$.~LS\I386\system32\ntdll.dll.

  The factory restore process is created and supported by the manufacturer of the computer, not Microsoft.  So you should check with the manufacturer of your computer to know what mean error codes and how to solve them.

• Dell Inspiron 531 - summer pc try to restore factory settings and hit the F8 key after close to a dozen times. I never see the advanced options to choose the factory restore. HELP please...

  tried to restore factory settings and hit the F8 key after close to a dozen times.  I never see the advanced options to choose the factory restore.   HELP please...  I'm following indications out of Dell's web site as well.    UGH

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  If you have problems with the process of recovery of Dell, contact Dell at the link above.

  It's Dell recovery, not Microsoft software/process of.

  See you soon.

  Mick Murphy - Microsoft partner

• Is it possible to recover data after the factory restore?

  Hi, I have laptop G62-340US and I use windows 7 64-bit. I am having trouble with streaming online videos, and whenever I start my computer, it shows a kind of errors, so I thought to restore my computer to factory setting. But I have some data inportant on my computer. I've been me request so if it is possible to recover data after the factory restore or I do something that restor factory will not delete my data?

  Hello

  You will need to back up all your personal files, etc. before executing a factory reset - an option to do this is to use the facilities available in Windows 7, as described in the guide on the link below.

  http://www.howtogeek.com/HOWTO/1838/using-backup-and-restore-in-Windows-7/

  Kind regards

  DP - K

• I've been hacked and was forced to return to the factory restore.  I would like to re - download my CC from Adobe and I am not given permission, how can I download?

  my computer has been hacked and I spent all day remove these viruses without success, so I was forced to return to the factory restore.  I am up and running again, but need to re - download my adobe cc to my computer.  I did not have permission to do so apparently without having to open a new account.  does anyone else have this problem?  How did you download your adobe cc without opening another account?

  Lorimarierose for more information on how to reinstall the Adobe Creative applications included with your subscription please see CC help | Install, update, or uninstall applications.

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Unable to sign on my MOTOBLUR account after the factory restore

  After seeing that I wasn't getting updated and no could not remove all the accounts on my CLIQ, I did a factory restore and tried to sign in with my existing MOTOBLUR account. An error message pops up saying that the session has expired or the password is incorrect.

  The password cannot be wrong, because I can access my account online. The message appears whenever I'm trying to connect. I use only a wifi connection.
  What should I do?

  To sign in blur, you will need to use 3G or wifi. You said you use wifi, make sure that the wifi icon is on the notification bar. If this is not the case, press menu and you can set it here when you register in blur of installation. If you still can not sign trying to join a 3G area, and then try again. The time-out error is saying that you don't send fast enough information on the server of blur. Password error appears but is not always the problem. If you arrive at sign always used the password and then follow the instructions to reset, then try again. Make sure that you use an e-mail address that you will be able to receive mail from.

• The factory restore setting once it has been formatted

  Hello

  I had my HP Probook s 4530. It reinstalled and formatted by mistake. Now, I couldn't see the HP and HP tools recovery partitions while windows, connect. But when I try to reinstall Win 7 with a bootable DVD, it shows the mentioned hidden partitions. I tried to press fn + F11 buttons in the boot process, but nothing happened.

  Question is: How can I restore to the factory using the HP Recovery and HP partitions tools setting?

  Any help would be much appreciated.

  BRGDS,

  I'm sorry, you know to be able to recovery your probook, you have 3 ways
  1. use the recovery partition "you said that it's empty now."
  2 - using recovery discs "DVD I think that you do not have it also.
  3 - using usb flash recovery "and I think that you do not have too.

  so, how can restore you without recovering files

  If you get these files from recovery to restore it

  you have 4 ways to him and get these files

  1. you can see if you have a friend or a friend of your friend, has the same probook you have
  and then, you can borrow his dvds or you can copy the recovery partition,

  2 - you can go to any store that sell the same probook you have and ask him to copy this recovery partition and give him money

  3. you can order website hp recovery discs if you are from the U.S. and pay for it

  4 - ask on the internet if someone can help you publish these files for recovery and so I think that there is any body upload 16 GB for you

  I think these are all ways that you can get your recovered files
  you all just need becomes this recovery files somehow and then it will be easy to restor it

  If you do not have to use any of these ways
  so you have the last option
  You can download the same operating system that you had when you bought your probook, then install it using the serial number that you like sticker on the back of your probook and then download all the drivers and software from the hp Web site

  That's all I know, but this is my first time to see a formatted partition is 100% free, there must be a few bytes for the system volume, try changing their letters to disk mangement right-click then choose change drive letter then add and then give each of them a letter as 'e '. ", h, I"
  and you will find appear them in your windows, but I don't know how it's going to be a 100% free

  That's all
  I'm soory for English mistakes
  Yehya

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• Failure of the factory restore?

  I tried to do a factory restore on my HP Pavilion m8247c with windows vista, so I could start over and put a new operating system on it. After that the restoration was finished he started and I got an error message saying: Configuration system error. Saying that if I fix my PC does not work, then the message ended by saying "(Code Purple)". "  Someone knows how to fix this problem, so I can use my computer again?

  Hello

  If you want to try to get Vista running, then try this:

  With error code purple on the screen, press SHIFT + f10 (the shift key and press F10 (at the top of the keyboard) at the same time) to open a small screen called command prompt. (So you get a small black screen with white text that says something about your first Windows version and ways down a bit, you will see "C:\ > '.)   It is all ready before you start typing.)
  Type the following line, just as you see here...

  Notepad C:\hp\bin\checkdmi\checkdmi.cmd

  so it will look like this

  C:\>Notepad C:\hp\bin\checkdmi\checkdmi.cmd

  Press ENTER.

  You will see the text of the file listed in a window using a simple text editor.
  Go to the beginning of the text. Press ENTER to set a space. This type...

  Goto cleanup

  Therefore, everything that comes after that, the first line looks like this...

  Goto cleanup

  Save the Notepad file and exit and restart your PC. You're good to go.

  Otherwise, install the new operating system itself, as has been pointed out by Frank.

  Jaco

• BlackBerry Q10 maintains the factory restore setting whenever it restarts. It cannot be restored with backup files too.

  Can someone help me with this problem. His cannot be restored with backup files. each time it ends with the restoration with previous backup it went back to the factory setting. its so annoying. Help me.

  http://www.BlackBerry.com/BTSC/KB36747 found this in another thread. the problem with this software.

• going, I'll be able to use the factory restore after hiding recovery drive Q?

  Hello world!!

  I recently bought E420 and I have restored factory settings once. Since then, the drive of Lenovo_recovery (Q) become visible in my exploring. Given that others also use this system, which anyone can mess with the recovery disk. I like to retrieve from the hard drive as its fast and easy so. I really never wanted to lose that drive. I tried to hide it

  I found this article on the Lenovo support site http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-71742 (see). I followed the steps. There were LenovoQDrivie.exe such file in my recovery disk so I download the Lenovo_hide_Drive_Q.exe and run that. After that my drive is not viisble in my exploring. I checked it the diskmanagement (make a right click my computer-gale-diskmanagement) here I can see the drive letter has been removed from this disk and see the car now, 100% free space... How can happen? is it just hidden? or I deleted the recovery because the article is for vista and other series of thinkpad? Please answer.

  I'm not currently check my system by running the factory as my system restore works very well and I have installed various related work in software.

  To check I pressed on enter at the beginning and after that I pressed F11 as flashed on screen and I could see display (Lenovo recovery screen after putting a password) which gives various restoration system - as option, command, prompt recovery of start and end of factory default restore. I don't want to take the risk I have no restore selected at the start of the factory and restarted. Defragment in window as I see this player with fragmentation of 3%.

  I just want to ask wheather my Lenovo_Drive is safe and I'll be able to use it to restore my system to factory default in the future? I don't want to try it now that the system is working fine and I don't want to take any chances.  In diskpart also I have lenovo dirve as partition 3 that is hidden. As I said could reach the screen giving 'restore defaults' opition, go, I'll be able to use this option in the future?

  Called the hotline, that they were not able to answer...

  I will be grateful if someone can help me...

  Thank you

  
  

  Hi Alexander,.

  Windows 7 recovery would erase the disk and put 7 on the entire disc.  So, you don't want that.  I didn't know you already burned disks.  It's good that you did.

  If you really want to test it, you could make a backup of the current system on external media, (such as a hard drive), and then run the recovery and restoration of the backup.  If it works, then you know recovery is correct.  If it isn't, then you could boot from the recovery discs you've done and restore it from your current backup.

  If you do not want to take the chance to test it, then at least you know that with restore disks and backup to external media that you can restore the system to its current state, no matter what happens.

  Dave

• BOOTMGR is Missing After the factory restore

  Hello

  I have a netbook with Windows XP as its OS S10e, I decided to restore it to the factory setting by pressing F11, after completing, it restarts and automatically install something and rebooted again, then this message appeared: BOOTMGR is Missing, press Ctrl + Alt + Delete to restart.

  Again, restoration, but the result was the same.
  My netbook has not had any CD backup

  What can I do?

  Thank you all,

  Unfortunately, all the proposed solutions did not work, I cannot restore my netbook and installed the new OS!

  Good bye

• Equium L350D - 11 d connecting to a network wireless after the factory restore

  Hello

  Recently, I've restored my Equium to factory following a virus. I am running Windows Vista Home Premium and it is out of warranty.

  When I try to connect to a network, it is said the computer does not have an installed and configured wireless network adapter. I recommend to install wireless networking equipment and checking that the correct drivers are loaded.

  How can I do this?

  In the PC Diagnostic tool under network, he said: "Realtek RTL8102E Family PCI - E Fast Ethernet NIC (NDIS 6.0) version = 6.2"

  However, in Device Manager, I also have a yellow exclamation beside an unknown device in the section "other devices." It's the only thing that has been highlighted with an exclamation point.

  In the system information section, I found that the vendor for this product ID is 08DA and the device ID is 8197 (usb\vid_08da & pid_8197\00e04c000001). I don't know what it refers to, or why it prevents my find all networks.

  Can you recommend what measures I can take, or divers you think I need to install to correct the problem. I guess I should save the drivers on an external hard drive?

  Thanks for your help.

  Ashley
  [email protected]

  It is really strange this unknown device is listed after recovery image installation. In General, recovery image contains all the necessary drivers, so something like this should not happen.

  Open if please check and if Device Manager card Realtek WLAN is listed under network adapters.
  According to specification for laptop, your laptop has wireless 802.11 network card g (RTL8187B) Realtek driver for this card, you can find and download from Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Please send comments.