The Installation of VMWare tools failed. In any case to force the update/install VMWare tools?

Similar Questions

• where do the updates installed on your pc?

  where do the updates installed on your pc?  I checked the edits and click Download 5.7 update.  I can't find anywhere on my pc.

  Yes, your right.  This is the default location.  In my case, I was clicking on the button download under 'Help', ' Check for Updates ' and the 5.7 update Advisory was there.  By clicking the button "Download" did nothing.  I tried the cat for almost 2 hours with Adobe Support and they just asked me to click on the direct link that they provided rather than fix the problem that the "Download" button did nothing.

  Thank you for your answer!

• The update install fails error 81

  Update install fails with error 81; "another installer running" I have no other installer running on this computer. All the solutions to this? Thank you!

  Hello

  This error appears when there is a background running program in the machine, the best option is to shut down the machines all running processes are closed. Restart the machine, it should work.

  You can also kill all processes associated with CC in the monitor activity manager task & then start.

  #main_You_are_already_running_another_installer http://helpx.adobe.com/Creative-Suite/KB/Troubleshoot-error-messages-Bootstrapper-CS5.html_

  Kind regards

  Sheena

• Hotfix required for the update install error Code: 0x800F0100

  Hello

  Ive tried installing updated KB2562937 nine times, whenever the installation fails with the error Code 0x800F0100, can someone help me solve this problem.

  XP Pro SP3 operating system.

  Thanks in advance.

  otev

  Hi otev,.

  Before windows updates, follow these methods.

  Method 1: Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Put the computer in a clean boot State prior to update installation to see if there are any software conflict as the clean boot helps eliminate software conflicts.

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Reference: http://support.microsoft.com/kb/906602

• Blue screen of death after the update installed at startup upward.

  I have windows xp sp3 after installed updates don't know which ones, because the installed when I stop and 52 of them there I now get a blue screen of death which says:

  Stop: c000007b {bad image}

  The application or DLL? \c:\windows\system32\winsrv.dll is not a valid windows image. Please check this against your installation diskette.

  I can't go to the safe mode get the same error and same with the last known good configuration. I can't even to safe mode command prompt, system, or debug mode recovery still giving me the same error. I repaired windows 3 times already and the same thing happens each time after that some update that I don't know he messes all this. Give me advice. I have antivirus Iola system mechanic. I think just to wipe the entire disk and do a clean install if you do not have anything else to tell me I'll do it, but I don't know if that even the problem will be solved because there seems to be a problem of windows software update. I also notice from the internet explorer 7 installed it stops working a few flashes upwards on you whenever you try to open it up if it's maybe part of the problem too. I do not plan to let internet 7 install go into all this time.

  Install the updates one at a time or 5 at the time may not be a bad idea.  Then when it breaks watch you and see if one of those is eager to replace your winsrv.dll file.

  You said you DO or DO NOT have to System Mechanic configured to run at startup?  Sometimes after installation of the updates, who see the new files (and if they are obsolete), can interpret the new legitimate files to be a threat.  If you could get started and uninstall that (at least temporarily) that would eliminate this possibility of this equation of many variables.

  The Dell has a number of service tag sticker and if so what does it say?  You can search for things by service number

  You should make a bootable CD of XP (no XP media required) Recovery Console.

  You see, Microsoft support engineers won't tell you how to do this either - since there is not an article of KB Microsoft Bing and link to.

  If you have a SATA drive, which will give you another challenge because you need to maybe get into BIOS and temporarily change the disk other than SATA configuration mode so the Recovery Console will be able to see, replace the suspicious winsrv.dll file, change the SATA drive and reboot...

  First, do the XP Recovery CD of Console and if you are able to use a system of work to ensure that the CD you made at least boots (you don't have to "do" something with it), which would be a good thing.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• Applications created with the Application generator does not start. It was after that I allowed the update install patches. Now the Version is 12.0.1f3 (32 bit)

  Help! Do not know what happened... I left the patch install the updater f3.  Now, when I create an application, it appears on the task bar (Windows 7) for a few seconds, then goes.  I don't know where to begin to understand this.

  Thank you

  Rich

  It is on the same computer.  The PC has the standard COMPUTER stuff.  VIper and they handle most of the firewall settings (windows).  I have turned them all off before installing.  I think it was a matter of execution engine.  I have no time to fight with LabView, so I uninstalled all LabView!  Then I made a new installation of the DVD.  This works.  I never install a patch of NOR without a week of free time!  In others, ever!  Whenever I do it, it takes me at least a day to get my operating environment!  Thanks for your time.  It is appreciated.

  Best regards

  Rich

• at startup the updates install every time. I need help please!

  Whenever I start my computer, it goes in the updates. Then, it does not start correctly and goes through the system restore.  I disabled the update updates, but it still happens.

  I check recent log and nothing is displayed since the month of May this year.

  Can someone help me with this problem.

  Thank you

  Hello

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Emails lost after the updates installed

  After installing the updates I don't get emails from people telling me they sent me emails to my yahoo e-mail address. I would get at least 100 emails a day and now I get less than 5 per day. What happened to my mail since I installed these upgrades? I'm waiting for email confirmation very important employment opportunities part and possible food and collection of my 401k so I can pay the rent for may. I need help on this issue immediately. Help!

  Hello

  Your question does contain all the required information necessary for us to help you. Please provide us with the following information.

  1. do you use any e-mail like Outlook client, to access your emails?

  2. access your email via Webmail?

  3 you get any error message all send or receive e-mails?

  4. what updates you install, where they update Windows or Office updates?

  You can try to do a system restore to a date before you install the updates and see if that solves the problem. Please refer to the below link for additional information on system restore mentioned:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-AU/Windows-Vista/system-restore-frequently-asked-questions

• Office Ko missing update in the updates installed, but Windows 7 says it is installed.

  One of my users knew a bug in Microsoft Office 2010, so I installed the good Office Update KB3085604.  Unfortunately, the user still knows the problem of Microsoft Office so I decided to check to see if the update was successfully installed.  When I go to "View installed updates", the KB3085604 of office does not appear. I tried to type in the Installed Updates research and he said: "no items match your search.

  What is strange, is that if I try to re - install the update, it says it's already installed and if you check the update history, it says that it has been installed. But even once, it does not appear in the installed updates.

  I tried to uninstall the update through command prompt using the wusa uninstall and it said that there is no such thing as the update. The computer running Windows 7 32 bit SP 1 and we use Sophos Endpoint Security. Maybe Sophos has played a role but other users of Sophos have been able to install this update without any problem. Any ideas what is causing this error?

  Trying to repair Microsoft Office 2010.

  Select Start, Control Panel, programs and features. Place the cursor on Microsoft Office 2010, right-click, and select Edit. Click on fix and continue. When it is finished, restart your computer.

• where is the location of the updates installed in Windows XP

  Looking for the path of updates installed on windows XP, Windows 7. I mean the location in the drive and the folder

  Looking for the path of updates installed on windows XP, Windows 7. I mean the location in the drive and the folder

  Not quite sure what you mean but, in Windows XP, updates are stored on the root drive (the drive where Windows is installed in) in
  WINDOWS\SoftwareDistribution\Download
  The uninstall files are stored in subfolders hidden from the Windows directory and are named $NtUninstallKBxxxxxx$.

  Windows 7 puts the updates in the same location as XP, but they are not reusable, because their content is stored in the BONES (in Volume Shadow service and component based) as are their uninstall information.

  MowGreen Services update - consumer safety

• After the updates installed for xp edition family, computer does not start even in safe mode (or in any other mode)

  computer does not restart after installing updates for xp home edition - does not restart in any mode (including safe mode)

  HiRonKlip,

  If you have the Windows XP installation disk, you can perform a manual system restore by following this link.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Interface Web links do not always work properly (check the updates, install app)

  OS 6.4.1, RN10200.

  I have 2 servers ReadyNAS (2 x RN10200). On one, when I click on for example, "check for updates", a pop-up window opens and he tells me that my OS is up to date. When I click on the link even on the other, the arrow device turns into a turning circle for a while and then comes back to arrow down, and that's all - it is not whether or not the operating system is up-to-date, or offer to upgrade. In order to upgrade the OS, I have to manually do it.

  Another example: I can not install the application on the NAS that is not fully functional. I click on 'Applications', get the list, click on install (from any application) and receive an app error message failed (2nd pop-up, one says that she prepares packages). Then, my browser window restarts the connection to the admin page and I'm on the System tab.

  The other NAS doesn't have this problem. The problems started when a system hung during the upgrade of the OS to 6.4.1. I had to do a factory reset (in fact, I tried to do a reload of the OS from flash which then ended in a complete reinstallation I can tell) and then manually install the operating system.

  Any help would be appreciated.

  Thank you

  Piet Stevens

  You are absolutely right. Thank you very much as I had no idea what it was. But your support made immediately in the right place. Very much appreciated.

• Windows 7 does not open after the updates installed

  Help, please. Computer my son makes the automatic updates today and now it does not start. It takes me to the blue Windows screen then appears a box that says "System Recovery Options". It has two options

  Recovery tools 1-use by choosing an operating system (no present in the box). I tried this one and it did not work.

  2. restore your computer using a system image, which does not either even though I know he created images of system. Please any information would be greatly appreciated.

  Once I try these options from the dialog box get, with startup repair, System Restore, system image recovery, Windows memory Diagnostic and invites but not these wil do anything either.

  What can I do so that he could start over again what can I remove updates?

  Hello

  Disable automatic restart your computer and check if there are errors displayed when the computer does not start. To disable automatic reboot follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Difficulty in getting the updates installed on Windows 7

  Updates are always available for Windows 7?  I am not able to download or install the ones I have now received and are listed as available for installation.  I would like any suggestions or comments.  I have AVG PC Tuneup and AVG Internet Security installed on my Dell Inspiron computer.

  Windows 7 update problems? First read this.

  :)

• Just updated Firefox updated itself. Does not connect to the web sites when the mouse does not move. This all started after the update installed. PS there are more slow too

  nones

  Yes it's true. You just need to download the .exe file top of page (Firefox Setup 25.0.1.exe).

  Save it to your computer, double click and you should get a wizard to guide you through the installation.