the installation program used HP all-in-one

my computer don't recognize me as the administrator so I'm unable to install my printer all-in-one psc 2410 HP

Hello

1. who is the operating system installed on your system?

2. What is the error message you get?

3. are you able to install other programs?

4. did you of recent changes to the system?

5 did you changes to user account settings?

Follow the steps mentioned below and check if the problem is resolved.

Method 1:

I suggest you to install the software of the printer in high mode.

(a) right click on the file of the software, click Run as administrator.

Method 2: Set up the printer.

Follow the link below and install the printer and check if that helps.

http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

Let us know if it helps.

Tags: Windows

Similar Questions

  • Cannot use the installer for Officejet 6500 all-in-one because of the resolution of the screen

    Hello

    I thought I could install my new Officejet 6500 as a printer network during the weekend, but apparently, HP had a different opinion...

    I use a netbook for my work as I travel a lot. Unfortunately, the screen resolution max available for these computers to wide screen is "limited" to 1024 x 576, which is less than the minimum required by the installation software (800 x 600), so I can't just install drivers and software. I tried to download the drivers from the HP support site, but ran into the same problem again.

    I'd appreciate any help I don't have a desktop or a laptop with a ratio of the 'normal' view and I'm stuck with a machine that is "useless"...

    Thanks a lot in advance!

    Yes. When you get to the window system requirements check, click the button cancel while now the keys Ctrl + Shift. It will bypass the sys. Req. check and continue with the installation. You may need to do this several times for the installation to continue.

  • Extra charge for the installation and use of the Creative Suite programs on the cloud?

    Sorry to ask a question apparently REAL dumbell!

    Are there extra charges over-and-above the monthly fee of $49.99 for the installation and use of the Creative Suite programs on the cloud?

    The annual subscription of $49,99 sounds too good to be true. I saw that a recent price list where each individual progeam was $49.99? -Thanks for your help, IM

    Intallation and download Support is free for creative cloud.

  • I recorded my new password to download Lightroom; the installation program then asked my password and rejected the password with that I just signed up. All of the suggestions.

    I recorded my new password to download Lightroom; the installation program then asked my password and rejected the password with that I just signed up. Any suggestions?

    Could you please try the computer administrator password here.

    Kind regards

    Hervé Khare

  • Query related to multi site VMWare esxi 5 according to the installation program.

    Hi all

    We have several distributed sites based on vSphere 5 according to the installation program which are the ESXi host 5.1, 5.1 vCenter and a storage for each site... Now, we anticipate adding distributed locations all host esx to vCenter built one of our new site.

    So, what should be the best way to achieve this.

    (1) is it advisable to add the distributed over wan to vCenter site on a different location?

    (2) can we also go with modes related? Since all our existing site already live, do we need to re - install vCenter to have bound mode installed?

    Concerning

    Varun Khatri

    Hi, as long as you have enough bandwidth between sites, you can add you remote cluster to vcenter.  I've done this before and I had no problems.  Your approach depends on the configuration of your environment.  If you have existing vCenter installed on each site, you can use the linked modes, and you don't need to reinstall to set up connected mode. vSphere Documentation Centre

  • uninstalled applications, received message: Please wait until the current program has finished uninstalling or one. After several reboots, still same message.

    Original title: 2 numbers do not know if they are related

    I have 2 questions and I don't know if they are related. Several days ago I was doing some cleaning and uninstalling programs to free up space. I don't know what I started with, but it seemed to go ok. However, after all that I've tried to uninstall gave me the message: Please wait until the current program has finished uninstalling or one. I rebooted the computer more than once during this period, but it still says that.

    Then my internet explore has stopped working just for 2 or 3 days. I've been using google chrome to access things, but it is rather slow.
    I ran repeated virus and malware scans my norton security and the microsoft Web site, and all said I am clean.

    Yes, it's windows 7 I appreciate the suggestions, but the problem was that he wouldn't LET me not uninstall anything. He gave me the waiting message please do anything, and he's not missing if I stopped and restarted. Finally, I gave up. I saved my files to my external hardrive and just do a full recovery of the computer. He solved the problem of installed programs and the internet problem explore both, although I hoped it would avoid going that drastic.

  • HP8500 A909A, the installation program recognizes printer, but cannot connect

    HP8500 A909A, the installation program recognizes printer, but cannot connect

    Ok.

    It is installed by USB on the other printer?

    Did you share the printer?

    have you set up a virtual usb port?

    Have you tried to use the diagnosis of HP printer installation utility to help Setup and configuration of your printer?

    It would have been simpler to use the LAN connector so the other PC online would not be a condition for its availability.

    (1) connect the printer with the LAN connector to your network switch or router and turn it on.

    (2) make sure that the IP address of the printer is your network subnet via the embedded Web server or printer print Panel menu.

    (3) set it up as a network on all PCs compuuter to make it available for use

  • The installation program will stop Message during the installation of CS3

    I get 'the installation program stops running Message' after disc 1 ends and ask disc 2 when I try to install CS3 Master Collection.  This is new Dell Vostro 270 s PC with Windows 7 Professional, which replaces a HP Windows 7 Home Edition. CS3 ran OK on the HP.  Suggestions?

    So please try to download a new copy of the installation files.  What to ask a second disc indicates he has difficulties to locate the required installation files.  With the download, you will have all the files installation in one place and it will be not necessary to insert the CD.

  • LaserJet pro m127 fn: impossible to analyze by using HP all-in - One Printer Remote android app.

    Hello

    I use Hp all-in-One Printer Remote android app, Print function works fine but scanning works nor on my phone (4.4 KitKat) or Tablet (jelly bean 4.1).

    analysis function works by using my laptop (Windows 7)

    Help, please.

    Hi @EslamHassan

    Welcome to the Forums of HP's Support. I think that you have a question about the HP all-in-One Printer Remote app.

    The LaserJet M127fw printer is not a printer supported for the HP AiO application. I have included the HP printers and Mobile Printing Solutions support document for reference.

  • Where is the USB port on the printer 4500 hp envy all-in-one

    Where is the USB port on the printer 4500 hp envy all-in-one

    So the question for your answer:

    Compatible products for:
    HP bt500 Bluetooth USB 2.0 Wireless Adapter (Q6273A)
     

    Color Multifunction and all-in-one
    HP Officejet Pro 8500 all-in - One Printer series - A909
    HP Officejet Pro L7500 all-in - One Printer series
    Mobile inkjet printers
    HP Officejet H470 Mobile Printer series
    Specialty Inkjet Photo
    HP Photosmart A520 printer range
    Printer HP Photosmart A620
    Printer HP Photosmart A630
    Series of HP Photosmart A820 Home Photo Center
    Printer HP Photosmart B8550

    And now, if you want to get help with your problem, you are cordially invited to use the assistance offered, otherwise I wish you all luck since your iPhone printing...

    For questions print via Bluetooth, you can connect with Apple, maybe you will be better as their response

    All the best...

  • Error 0 x 80040201 event could not rely on any of the subscribers. The installation program will end now

    I get this error when you try to uninstall Creative Sound Blaster Audigy 2 ZS. Uninstall stops around 60%, then the error message (see post title), then Setup ends.

    I have now all sound and cannot take place.

    I looked online and there were a few messages mentioning reg fixes of corruption that had solved the problem. Recently, I installed a couple of mounting aps, so I thought that this feeling a bit made of new video. So I downloaded ccleaner v 3.05.1409 CNET, done a reg scan and set ONLY the entries that had to do with Creative, rebooted, but I still get the error if I try to modify, repair, or uninstall the Creative suite. (I don't have ccleaner difficulty all other entries) So the clean reg did not no diff.

    Now I can't install or uninstall.

    I am running XP SP3 all updates. Other than the sound, my system works perfectly.

    Help!

    Thank you!

    Mark

    Hello

    To resolve the above error message, follow the procedures below.

    a. close all open windows and programs.

    b. Click Start and then click Run. The Run dialog box is displayed.

    (c) as shown in this illustration, type MSCONFIG and click OK.

    d. the System Configuration utility appears. Click BOOT. INI, check the "/ SAFEBOOT" option, and then click OK.

    e. When you are prompted to restart the computer. Click on restart.

    f. the computer restarts in safe mode. (This may take several minutes, and its display will appear different from normal).

    g. mode safe mode, click Start, Control Panel, then add/remove programs. Select the programs you wish to uninstall, for example, Sound Blaster Audigy 2. Must uninstall successfully without error "the installer cannot invoke any of the subscribers.

    h. once the uninstall is complete, close the control panel and open windows explore.

    i. in Windows Explorer, click on TOOLS, then Folder Options. In Folder Options, click the view tab and choose the option view the hidden files and folders, under Advanced Options. Also, uncheck Hide extensions of the file types that you want to know. Click on apply, then OK.

    j. in Windows Explorer, navigate to the folder C:\Program Creative , while C: is the drive where the software is installed and remove subfolders associated with the software you are trying to uninstall. If you have a single creative hardware, you can remove the creative brief.

    j. in Windows Explorer, look for C:\Program InstallShield Installation Information------folder. In this folder, you will see strange named directories that contain information about the installation of the application and the material / uninstall information.

    To find which directories contain information on Creative products. Open a directory at a time and watch the installation. INI file. This file should open in Notepad.

    In the file, locate the AppName =, for example, the AppName =Creative MediaSource. If the installation program. INI contains information on the creative product you are trying to remove, remove the directory as the Setup program. INI has been found. Continue to go through all the directories and remove the most creative in the InstallShield Installation informationfolder n.

    k. after the creation of directories are deleted. Restart the computer in Normal mode. To do this, repeat steps 1 to 5, but in step 4, uncheck "/ SAFEBOOT"

    a. restart the computer and reinstall the application.

    Refer to this article for help:
    http://support.creative.com/kb/showarticle.aspx?url=http://Ask.Creative.com:80/SRVS/cgi-bin/WEBCGI.exe/,/?St=425,E=0000000001318352054,K=3345,SXI=5,Answer51608=obj(51608):obj(51637)

  • I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?

    I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?

    You try to install through the Explorer windows, not good... Try to install

    XP CD, reboot the pc. At this point, the value of the BIOS pc boot xp cd (cdrom), defined as 1

    boot device, set the hd as the second, boot to a cd. On the menu of the xp cd, select "Install xp", remove

    the partition, create one, let xp format & install auto. It is a clean installation, also, once she

    housing starts, do not touch any keys or mouce until xp asks for the product key #...

    You can read about it here. http://TechNet.Microsoft.com/en-us/library/bb457062.aspx

  • shortcut for deskjet 8600 pro has disappeared. Re-run the installation program does not help. How can I get that back?

    When I bought and installed my Pro Deskjet 8600 in last July, a wonderful control program has been installed. However, the shortcut on the desktop for this program has disappeared, and I can't. Re-run the installation program does not help. How can I get that back. All I have now is an older version of the HP Solution Center, which does not have the features that I got into the habit of.

    Hello

    Uninstall the software by following programs > HP > HP Officejet Pro 8600 > Uninstall.

    Then download and install the latest version of the software below, it is a more recent software and should solve the problem you are experiencing:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4131&product=4323659&sw_lang=

    Shlomi

  • Install the printer driver HP LaserJet 3100 for Wind.XP worms. 1.1 the installation program does not start.

    An older version of Jet Suite Pro for HP Laser Jet 3100 for Win 2000 /NT 4.0 had run under XP (with an error during systemstart).

    After an update of Windows XP or this SW Jet Suite Pro to clean record no longer works.

    A new t CD - ROM HP with HP LaserJet 3100 Printer Driver Version 1.1 for Windows XP SW starts and stops after some time.

    The installation program does not run.

    At the stop "WOW. EXE does not react "."  "Waiting times for 16-bit system subtask ends." Part.System if necessary. instability.    End with OK Win16 system.

    HP after reclamation / question without help until today.

    Dieter Jansen

    Hello

    I suggest to Uninstall all the HP Laserjet Printer drivers and then try to install.

    For the second question, you need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  • Failed to initialize the installation program. Error 110. On Windows XP.

    Whenever I try to install LV6.1 or LV6.1 DSC Run-Time system, on my Windows XP machine, I always get the following error message:

    Failed to initialize the installation program. Error 110.

    I think it has something to do with the MSI or "Windows Installer". I tried to uninstall all of THE products of National Instruments, but it did not help. Any ideas?

    Hello. Thank you. I tried, but in fact, it did not help. However, after doing a little research on our, I found a solution by following these steps:

    1. reboot Windows XP in Safe Mode
    2. double-click on the Setup program to start the installation process
    3 cancel the installation process after it starts
    4. restart windows in normal mode

    Now, all my applications of MSI with setup.exe work correctly! Quite strange. Just for the record: this problem was not due to a Virus protection program (as all assumed first that many people) and it kept me from running applications (MSI?) of ANY installer from a CD.

Maybe you are looking for

  • Why music plays now when I open the browser?

    I tried the published corrections. always play music.

  • Boot directly from Toshiba external drive px1267e - 1 g 32

    Hello I have a laptop Toshiba Satellite A100-906. My BIOS supports the usb-memory boot. If I install an OS in drive toshiba usb px1267e - 1 g 32, it will boot directly in the operating system. In general, it is possible for a start of the px1267e - 1

  • Upgrade graphics card on laptop T400?

    Hello I wonder if it is possible to update the graphics card on my laptop T400. I opened the Device Manager, went to graphics cards, and it's a pretty weak (so I hear) Mobile Intel (r) 4 Series Express Chipset Family. I want to upgrade, because of di

  • Not motor control steps (very basic)

    Hello! I want to build a Labview/application software that will directly control the motor step-by-step to a cnc one axis (right now). first of all regarding the software my requirements are: (1) I have read a CAD or any vectorial image. (2) so I wan

  • BlackBerry Smartphones Blackberry Torch 9800 battery problems

    I noticed that my battery drains easily. I bought my light less than a week. I did a lot of stuffs to save my battery power, but it seems unnecessary. The Lightningbolt was lost while im loading. I tried ti charge it while its corn again, it was usel