the instruction at 0x00458b83 referenced memeory to 0x00000000. The memory could not be read.

Similar Questions

• ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read".

  Message MSVidCtl broadcast system receiver: ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read". This error will not go away and I can not disable or delete the file. How can I stop it?

  Hi SteveGHowe,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try to disable and re-enable the Media Center service and check:
   
  a. Click Start. Click run.
  b. type: services.msc and press ENTER.
  c. find Service Media Center Receiver.
  d. right-click on the service and click on stop.
  e. restart the computer and follow the same steps of 'a' by 'c '.
  f. now right-click on the service and click Start.
   
  Also, try the steps listed in the following link:
   
  Troubleshooting steps I use for Media Center component registration failure error

• Error - the instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read". Computer Windows XP freezes when online.

  Original title: svchost.exe - Application error.

  When I'm online I get the error message appear as follows:

  Svchost.exe - Application error

  The instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read".

  Then my computer freezes

  Don't know what triggered it on my machine, I do not use 'messenger' , but I discovered that it was something to do with Windows. I have a Toshiba laptop, I finally ran the process of "adding value to products" using their 'product recovery disk '.  It took hours to reload everything and download the updates after the hard drive has been re-configured, but it seems to have solved the problems that I had with.  Radical solution, I know, but I'm not a "geek" so was becoming more frustrated with the constant "freezes" and poor performance.  I can only assume that my Windows XP system had somehow been corrupted.  It's all working fine now, fingers crossed!

• The instruction at 0x73238e6f referenced memory at 0x00000000. The memory could not be read.

  "The instruction at 0x73238e6f referenced memory at 0x00000000. The memory could not be read. Click on OK to terminate the program. »
  Computer turns on but before he can get to the login screen I get this error. The screen remains black, with the exception of the error window.
  It had also decided to perform a disk check before it happened.

  Hello

  1 did you changes to the computer before the show?

  2. When you receive the error message?

  Try the steps below and check if the problem persists.

  Step 1:

  Safe mode

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  See the link below to start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  Clean boot

  I recommend you perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

• The instruction at 0x01764b69 referenced memory at 0x00000000. The memory could not be read. Click on OK to terminate the program.

  An error message "the instruction at 0x01764b69 referenced memory at 0x00000000. The memory could not be read. Click OK to terminate the program"appears when I turn off my computer. Could you please tell what is happening with my computer and how to fix it? Thank you.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Run the fix it and check.
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance/en-us

  Method 2:
  Perform a clean boot and check if a third-party software is causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  You can diagnose disorders of memory on the computer
  by following the steps in the link.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Method 4:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 5:
  If the above steps doesn't help you can run chkdsk from WinRE (Windows Recovery Environment) mode and look for the question.

  See the following link for more information about system recovery options.

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  See the section: to open the Options menu on your computer system recovery System Recovery Options

  Select the command line option. At the command prompt, type the following command and press ENTER:

  chkdsk drive: / r
  CHKDSK drive: / f

  CHKDSK warning:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Previous post: the results.

  Reference links:
  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Previous post: the results.

• The instruction at "0x7c9105f8" referenced memory at "0x08c60010". The memory could not be 'read'.___Click on OK to terminate the program.

  My problem is that whenever I try to open a game, I get the error message that

  "The instruction at"0x7c9105f8"referenced memory at"0x08c60010". The memory could not be "read".

  Click on OK to terminate the program. »

  and I have to close the program.

  Hi Dani,

  1. who is the edition of Windows that is installed on the computer?
  2. what game you try to play?

  Try these steps and check the result.
  Step 1: Run the memory diagnostic tool
  a. see diagnosis of problems of memory on your computer
  b. Once you correct the errors, check if the problem persists.

  Step 2: Check the game sellers website to see if there are updates or patches for the game and install it.

  Step 3: If the problem persists, uninstall and reinstall the game and then check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support

• "The instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. "when I go to create a new pdf of the file after the installation of updates

  Original title: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  I worked on a design project for a few days I made several pdf files from. During the night, Windows ran and installed the updates on my computer. (My design file was open at the time). Now, when I go to create a new pdf of the file, I get the following error code: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  HELP - I can't find a solution.

  Thank you!!

  Hello

  1. what program you use for your design project?

  2. did you run the repair of this program?

  Perform System Restore on the computer and check if that helps.

• Error message: "the instruction at oxo656edab referenced memory at oxo6d20e8. The memory could not be read', play Pogo games.

  Original title: Pogo games

  I'm playing a game on pogo and when I try to activate a games, this warning comes up and won't let me play a game.  The warning States the following, "the instruction at oxo656edab referenced memory at oxo6d20e8.  The memory could not be read.   Help!  What should I do

  Hello Barb,

  1. you are trying to play games online?

  2 are you facing this problem when you play Pogo games?

  3. what web browser do you use?

  If you use Internet Explorer, then try the work around described in the following article:

  You may receive an error "memory could not be read" message when you click certain Web site links in Internet Explorer 6

  You can also read the following article and check if it helps.

  Internet Explorer is slow? 5 things to try

• instruction 0x6ab4ca75 referenced memory at 0xa623da7d. The memory could not be read-

  What does this error message, and what I can do about it?

   instruction 0x6ab4ca75 referenced memory at 0xa623da7d. The memory could not be read .

  Hello

  ·         When you encounter this error message and what is the exact error message?

  ·         Are you able to boot to the desktop normally?

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

  Please provide details so that we can help you in a better way.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• BTStackServer.exe - Application error, the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read

  Sometimes my computer will display a "BTStackServer.exe - Application error' window that reads:"the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read. When this error POPs, within seconds the computer just turned off completely and I have to turn it back on. As a first step, it rarely happened, but now it will be pop up and stop a little less than 5 minutes to restart the computer. I have a Lenovo x 201 running Windows 7 PRO, and two sticks of 4 G of ram. I tried reversing the two RAM sticks from one location to the other, but that has no effect. Would it still a problem with the RAM sticks? I have the latest version of Norton Security and it shows no virus. If anyone has any ideas, what could be the cause of this it would be appreciated.

  Hello Kevin,

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your time.

  Before reinstalling Windows, I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Please keep us updated.

  Thank you

• The instruction at 0x76a10cb3 referenced memory at 0x00000008. The memory could not be read. Help, please

  I get a meassage on my phone that says: the instruction at 0x76a10cb3 referenced memory at 0x00000008. The memory could not be read.

  He completely disable any use in my computer. I haven't added any new software, it is just appeared while I was with my computer. No one knows what may cause this problem.

  When you run an application that was built by using Microsoft .NET Framework 1.1 and the application is under a heavy load and uses a lot of memory, you may receive the following error message:

  The instruction at '79259769 'referenced memory at "0x00000008" x 0. The memory could not be "read".

  http://support.Microsoft.com/kb/830724/en-us

  Try to download the latest version and check

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=17718

  Or

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=40779

• Get a pop-up 'the instruction at 0x4000ed70 referenced memory at 0 x 00000018. The memory could not be read. »

  Apologies if this is the wrong place to put this.

  Earlier I turned on my computer. A pop-up appeared and said "the instruction at 0x4000ed70 referenced memory at 0 x 00000018. The memory could not be read. »

  Since there was only one option, click on OK to terminate the program, I did. Nothing seems to be different; computer does not restart, seems to work very well and everything. But I'm just curious, what on earth does that mean?

  I don't know if I need to further details, but my computer is running Windows 7 Home Premium.

  Probably just a glych with an auto from problem and you only have to investigate if the problem persists, if so http://support.microsoft.com/kb/929135

• When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I'm running on Windows using Intel (R) Graphics 4600 8.1

  When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I run on Windows using Intel (R) Graphics 4600 8.1. Can someone help me with this?

  Hi Tanuj,

  Thanks for your reply. The problem seems to be a damaged printer driver. I tried to print from my laptop computer rather than my PC and that worked OK. I downloaded the latest driver for the Epson 3880 but then find that the print spooler has become invalid. When I restarted the print spooler, everything worked again and I'm able to print as usual.

  Concerning

  Gordon

  Gordon Gentles

  [email protected]

• Can not start my computer hp envy and notification, I get the instruction at 0x6dcf61a0 referenced memory at 0xe19fa418. The memory could not be read

  Original title: the pc startup problem

  I can't start my computer hp envy and the notification I receive

  Theinstruction at 0x6dcf61a0 referenced memory at 0xe19fa418. The memory could not be read

  After I ok this threat my laptop screen will begin to Flash and no action more than I can do except power off.

  Hello

  Thanks for all, but am confused after a lot of links sent u and also the main problem is that I can't connect to my laptop that I told u im unable to take any action.

  The first thing that I advised you to do did not connect.

  I suggest you read the advice of HP

  Run HP diagnostics:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html?JumpID=va_r602_us/en/any/PPS/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/DT

• error on google chrome: "the internet in memory of 0x635835f referenced by 0 x 00000029. the memory could not be read. »

  Original title:

  error on google chrome

  I get a box that says: "the internet in memory of 0x635835f referenced by 0 x 00000029. the memory could not be read. "what should I do

  Hello

  1. when exactly you get the error message? When you play the game online using Google chrome?

  2. are you having similar problem when using Internet Explorer?

  If the problem is with Google chrome then I suggest that you contact Google chrome support.

  http://www.Google.com/support/chrome/bin/request.py?contact_type=contact _

  Provide us with more information about the issue so that we can better help you.

  Let us know if it helps!