the internal HARD drive has been corrupted and I fails to make the back upward. need information.
I've owned an HP Pavilion dm1-LQ862PA #UUF, used to be windows 7-64 bit. the internal hard drive has been corrupted and recommended to replace another. they were asking for the backup cd and I failed to do, and I do not regret it. Well, except to lose all my files and programs that I installed, it will also include bluetooth, wi - fi and other important built in programs? I'm not a computer expert. If ever these important programs had totally disappeared, how retrieve it? my laptop in an HP authorized service center will be probably expensive and I decided to buy a new HARD drive and ask someone to put it in and install a new OS. Please help thanks
There is a support for your PC page where all the software drivers to run the hardware on your PC such as bluetooth and wireless can be reinstalled.
What I don't see is the availability of recovery disks to reinstall the operating system (windows 7 64-bit) or your PC programs (other than those listed in the link of support above).
This means that if you want to replace the hard drive, you must make your own W7 64-bit installation media and use the 7 product key of Microsoft windows on the bottom of your PC to activate the installation.
That assumes you can read all 25 characters of the product key windows 7.
If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.
Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.
Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.
Use 25 characters on the PC product key to activate the installation.
The key will activate a 32 or 64 bit installation.
Then go to the support of the PC and driver page to install the drivers you need.
Link to downloads ISO of W7 is below.
The replacement hard drive should be a 320 GB SATA II 5 400 rpm Disk If you want the same specification provided with your PC hard drive.
Please refer to Chapter 4 of the service manual on the link below for the procedures for removal and replacement of the hard disk.
Original title: recovery of original windows 8
When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.
Please help me to get my windows genuine 8 back so I could get additional updates downloaded.
Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.
If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.
See the suggestions posted by Andre Da Costa replied on March 7, 2013.
In addition to this, see:
Product key lost or misplaced (certificate of authenticity) for Windows
If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.
Hope this information was useful.
My hard drive has been corrupted and I had to format and reload windows 7. It worked OK for 6 weeks, but now says it is a counterfeit copy. I used the original product key, when I rebooted it. Ideas?To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )Once downloaded, run the tool.Click on the button continue, after a short time, continue button will change to a copy button.Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.
I have been using Adobe CS6 on my PC and my hard drive has been corrupted, so I had to reinstall everything.
I reinstalled Adobe CS6 and it does not accept my serial number now, I have no idea why. I have not installed anywhere else? Don't know what the problem is.
It was a purchase online and downloaded directly from Adobe and it shows my series on their website with the download?
You must use exactly the product that corresponds to your serial number, error: "serial number is not valid for this product". Adobe Creative Suite
My hard drive crashed (again) and the GeekSquad replaced the hard drive and reloaded the OS from a disk they had in the store. I get a message from windows activiate. I have the restore CD but did not have them when the car crashed. How can I find my activation code?
For activation look side on the box office or a cell phone, the bottom of the laptop.
How to activate Windows 7 or Vista manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
5) stay on the phone (do not select/press options) and wait for a person to help you with the activation.
How to resolve common activation problems
http://adacosta.spaces.live.com/blog/CNS! E8E5CC039D51E3DB! 67219.entry? a = 584475978
How to activate Windows Vista by phone
Microsoft Activation centers worldwide telephone numbers:
(This site is for activating Volume License, but if you call, they will help you)
The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx
Never be afraid to ask. This forum has some of the best people in the world to help.
My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows. The system is installed and running on the SSD, with my old drive system currently used for storage a
My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows. The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable. The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop. Can you tell me the best way to do it? -Thank you
If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Serial number and activation support (non - CC) chat
http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )
My internal hard drive has suddenly developed the write protection and has resisted each of my attempts to change this. I found issues related to external hard drives, but have not met a subject that bears on the disk system hard to develop this problem.
The last State of operational activities that are known:
My main hard drive read/write functions were fine the day before. The only things I did today were the usual activities like browsing the web, watching videos, etc.. The only thing I did of note has been download a Steam game, which required the U-Play from Ubisoft. I installed the game and U-Play, so the game went very well. Then I played another game of steam which does not need U-Play, then attempts to transfer files on a USB key.
Steps taken to solve the problem:
When you try to transfer files, warning "the disk is write protected" appears. I thought that it odd, as I had never met this caveat on this PC before. I discovered that all the files in the C drive have been suddenly write protected. My attempts to solve this problem include:
- Deactivation of 'Read only' file level and folder settings. The settings app doesn't seem to be a problem, but the moving folder gave the warning and she returned to "read only".
- What allows all permissions for the users and system Admins for drive C properties > Security (I found it odd that users have all permissions, when I clearly remember all the usual permissions enabled previously)
- Reboot/boot scan running for drive C to properties error checking > tools > error checking, which reported no error.
- Opened as administrator command prompt and entering 'diskpart', 'list volume', "select volume #', disk clear readonly attribute, readonly attributes volume clear." The clear drive has reported a failure, while the clear volume reported a success.
None of these steps have managed to solve the question of write protection. Might this problem be possibly related to the downloaded game, or the program U-Play from Ubisoft? Is there something that I missed? What can I do else? I have documents and files that have not been backed up, but I don't want to lose.
Thank you for reading, any help would be appreciated!
I'm really sorry for your time. The culprit is revealed to be the key USB is write-protected, not the drive internal (phew!). I guess I panicked a bit and don't think to test with another stick of memory, which transferred files very well. Problem solved, I'll just reformat the wobbly flash drive.
Thank you for sticking with it, even when I probably don't have too much sense, you have been very helpful and patient.
Hello everyone, this is my first post so I hope that I understand.
I bought a HP Pavilion s3050uk of second hand compact office, product number RY930AA.
The only OS on it is a trial version of Windows 7 Ultimate, little time to expire. I knew when I bought but I was just able to reinstall Vista Home Premium using the HP Recovery Kit and the number of product key from the COA on the PC sticker.
However, I think now that the HARD drive has been replaced at some point - my machine has a 200 GB (Seagate ST3200822AS ATA) and I think that these machines haven't shipped with a 250 GB? Now, I'm worried that I will pass on the recovery kit but it won't reinstall Vista because the hardware has been changed. If it is probably the case of others has experience then I may as well save my money (which is very tight at the moment, where the 2nd hand PC) and put it toward the purchase of an operating system package full.
Hope someone is able to advise me.
If you buy a defined recovery disk and perform a factory original operating system image recovery and the partition scheme will be installed on the new hard drive.
Certificate of authenticity (w\ license key) Microsoft Windows OEM is always visible on the bottom of the laptop?
HARD drive has been reformatted accidentally. I'm not interested in the stored data, I want to just go back to the factory settings. Operating system is Vista.
Thanks for any advice.
You will need the recovery media you do when you received the system - attach the flash drive or insert the first disk in the backup media, power and press F12. Start since the media and follow the prompts to reload the factory software image.
If you do not prepare a media defined in advance, you will need to contact the customer service Dell to buy a game now - they are in fact not able to provide Windows Vista at this stage.
How can I reinstall Indesign after that my hard drive has been deleted?
After obtaining a hard drive in working condition, you can reinstall the software using the discs if you bought the discs, or you can download your software as a trial version and use your original serial number to activate it.
If the software is the latest version, you can download it from the Adobe product pages.
If the software is an older version, you can download the demo version of the software using the link below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download on this site.
my wifi password has been changed and now I want to get back in touch with the new password HOW
If you are not prompted to use the new password to your Wi - Fi network when trying to connect, you may have to remove the network on your system. This can be done by the following steps.
- Open system preferences in the Apple menu
- Choose the network
- Select a Wi - Fi connection on the left
- Click Advanced... in the bottom right
- Choose your network from the list of preferred networks
- Click on the '-' at the bottom of the list
- Click OK
- Click on apply
Once removed try to connect to your Wi - Fi network normally and you will be prompted for the password.
I use Adobe first Pro CS5. I'm working on a project for a month and this morning, I realized that there is a problem with it. To make sure that I don't junk my computer upwards, I have always to leave the files I'm working with my expansion drive and I work from there. I have autosave all the time, etc, but apparently, at some recent point, my disk expansion has been disconnected, and Premiere Pro tells me that all my files are offline. My biggest problem is that I've renamed all my video files in Premiere Pro, but I not rename them on my drive for expansion. Thus, for them find would probably take me as long, if not more, of my original work. Is it possible in the world that I can record these files and the long hours that I've already spent editing this video? If you have an idea regarding what I can do, I would be eternally grateful. Note: I work with AVCHD clips.
Please, I beg you. Whatever that is would be helpful at this stage.
Make sure that Premiere Pro is closed, and reconnect the drive. Everything should be good when you reopen the project.
The exceptions are two. Bill has raised the first. The second is that if you have already saved the project with offline files. Once you do that, you're done.
hard drive went bad in my computer hp and was replaced, I can't find the disk came with it or restore disks, I'm not sure I ever had any, is a model of Tower not laptop I need to know if there is a way to download a copy for my computer on a drive of my laptop or what should I do?
There is no download available on the Net and your hard drive as failed now, you are unable to make the recovery of the disks.
And you cannot use from recovery disks of a different brand or model (laptop) to reinstall Vista on your Tower / Desktop
Contact HP and ask them to send you a set of recovery disks.
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
See you soon.
I had all my music and photos on my new hard drive, then one day they removed somehow themselves. Luckily I had backups of certain things, but not about this. When I copied stuff back it says you want to crush showing that files have been deleted actually not.
The files are not hidden files and they take place. When I select all the files it says the total is 38.8 MB, but just one of the only records was more than that. Anyone know how to recover these files.
It will be interesting to know which laptop computer Toshiba a 160 GB HARD drive.
Anyway: it's really not easy talk if someone reports on data deleted somehow themselves. In my opinion, you should ask a friend for help that has all this in front of him and can much better deal with it. On this way, we can only speculate and you won't be size just your time.
Good luck Debra!
I have a problem working with iMovie on my MacBook Air... Drive HARD internal of the MacBook is unfortunately to small for the biggest projects iMovie... Is there a way to work on external hard drives or perhaps TimeCapsule?
Thank you very much in advance!
Yes, put your iMovie library/ies on a fast (7200 RPM) external hard drive to the Apple format is a good way of working. Details of the setting up of libraries are covered in the help files to:
Note that you may need to consolidate the media in an existing library before you travel to avoid breaking links to media located in the libraries from other Apple applications. See:
I would not recommend using Time Capsule - you would need a separate partition above the used by time machine, and you could put some data on the same drive as backup. Connection speed can also be a problem.
Maybe you are looking for
Mac OS 10.11.4 (El Capitan) Mac Pro (early 2008) 8 GB of RAM 2 x 2.8 Ghz This Mac two monitors has been improved lion in El Capitan yesterday. All right, except that it's not remembering places window between start-ups. So if I drag my Safari window
in the last 10 days my battery suddenly varnishes in half a day and I use more than usual. I noticed under the battery, it says that my FB using Message18 of 325% photo watsapp 10% 8% etc... something I can do to stop this rapid energy use?Thank you
You want to ensure that I have the process down before you begin... My Acer Aspire AX1301-U1302 small form factor desktop hard drive (windows 7) has failed for a period of 5 minutes yesterday. I can't start Windows. (I assume that the disk is done -
need a product key to enter because I had to reload everything