The key of the MA is not configured properly or is corrupted in the file system and s doe does not exist in the repository of management.
I get this error and is it possible to solve this problem without re-creating the service/s once again, etc. Just curious, if you have suggestions/steps I may have missed or I'll drop and recreate new services
In any case, I have a backup of the emkey.ora and place it in the sysman/config directory, but still does not work... Please see below...
C:\Documents and Settings\abigail > emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Enter the password for the repository:
********
****
The key of the MA is not configured properly or is corrupted in the file system and the DOE
s does not exist in the repository of management. To correct the problem:
(1) (copy the emkey.ora another WHO file or backup machine OH/sysman/c
onfig directory.
(2) configure the emkey.ora file by running ' emctl config emkey - emkeyfile < emkey.
".ora file location >.
C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Enter the password for the repository:
********
****
The key of Em is already configured. To override the current configuration, run "em".
CTL emkey < options > config - force. "
C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config-force - sysman_pwd *.
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The key of the MA could not be configured. Cannot access the file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail > emctl dbconsole sysman_pwd secure *.
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://Abigail:5501 / console/em/aboutApplication
DBCONSOLE already stopped... Fact.
Officer is arrested... Fact.
Dbconsole fixing... Has begun.
Please enter repository schema password:
Dbconsole fixing... Failed.
EMKey is misconfigured.
Sorry but I have to ignore your suggestion and don't worry how I spend my time
AND OHMYGODD IT WORKSS! For later use, this is how I solved it based on my research, in fact based on a particular search:
http://franjv.blogspot.com/2013/08/eMKey-problems-in-Oracle-RAC-11gr2.html
Thank you the one who wrote this and... is it the same "Fran" who helped me last time? Coincidence?
In any case, thanks
Tags: Database
Similar Questions
-
0rignal title: Vista SP1 didn't update problem
So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update. So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything. It has a Dell inspiron 1525 and has no CD and no key for its program of Vista. I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck. When I use the Startup Repair tool there is no nothing. So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1. He had a restore point saved just before I tried to update to SP1. Whenever I chose this method, it's but the whole process then in the end it says:
"System restore was not entirely successful. File system and the setting of your computer have not changed. "
then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time. If anyone has had this problem and bring myself through it. I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.
If you need more information please let me know and evil provides everything I can
HelloFollow the steps and check if the problem persists.Step 1:I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-offhttp://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note : Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Step 2:As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.Note: Restart your machine as usual by following step 7.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?
You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.
Hope that you made the backup recommended all of your data before attempting to install Vista SP2.
-
I've seen other posts on this topic. Nothing seems to work, so I thought I would explain my situation.
The machine is new. Win7 64 bit company. The problem I see is that I try to load some versions of Visual Studio on the new machine. However, none of the discs auto-run using my local internal DVD drive. They all have a Readme file with the message "this disc contains a"UDF"file system and requires an operating system that supports the ISO-13346"UDF"file system specification."
I know that the discs are good, I used the on my old machine, and I can always use them on other machines I tested.
The real kicker here is that I can plug an external USB DVD drive... and then the local drive starts to read the installation discs! It's like making this action allows something else in the machine.
Also, I even restarted the machine mode of diagnosis (without external DVD drive attached)... and restart, the drive would read the installation discs. BUT when I do a full stop and then turn on the machine upward, the local drive gives me the same readme file. Again, it is as if something gets activated, and then reset to a complete stop.
I am at a loss of what to check then. Real head-scratcher, because I know the drive works and the machine can recognize the drive and even read installation discs.
I do not have the applications installed on the machine of DVD burning, so I don't think there is a conflict.
Any suggestions are welcome.
Thanks in advance!
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums so the problems occurring on Windows 7 Enterprise.
Hope this information helps.
-
verification of the file system and the disk check
I always thought I knew.
But I'll have more in addition to the doubts and uncertainties.When is to perform the verification of the file system?
When is to perform the disk check?t-4-2
Hello
SFC/scannow - run when you suspect that there may be a file system corruption as it will check the digital
Signatures. Of course, SFC will attempt to overwrite any file that is not signed correctly. For many errors
It should be considered a first step in the effort to repair.How to repair the operating system and how to restore the configuration of the operating system to a previous version
point in time in Windows Vista
http://support.Microsoft.com/kb/936212How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929833System File Checker
http://msdn.Microsoft.com/en-us/library/aa382541 (vs.85) .aspxSystem File Checker
http://en.Wikipedia.org/wiki/System_File_Checker==================================================
CheckDisk (chkdsk) should be run every time you think that hard drive corruption as possible which could be
1 file on the disc as it verifies the logical integrity of the disc. My preference is to run it also
SFC is executed at any time, especially if there was any found errors.This explains how Vista and Windows 7 checkdisk (chkdsk)
An explanation of CHKDSK and the new /C and /I switches
http://support.Microsoft.com/kb/187941Chkdsk
http://en.Wikipedia.org/wiki/chkdskI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Delete a file system and now Windows XP will not boot.
Original title: delete the file system
I deleted a file in system 32 hal.dll and cannot start my PCHi bibidennis,
Perform a repair of Windows XP installation to fix the problem.
For instructions, see the following article:
If you have installed Internet Explorer 7 or 8, see the following article for instructions on performing a repair of Windows XP installation:
-
12 c on the repository server management agent does not start due to a failure of the system
My environment architecture for 12 c Cloud Control (used for the purpose of personal practice) can be explained as follows:
@DBSERVER: (OEL6.5, x 86-64)
-12 c Enterprise Manager Cloud Control (EMCC)
-Database 11.2.0.4 which acts as a repository for 12 c EMCC
Monitored host is on a virtual machine (VM12) which is currently in the DBSERVER:
VM12: (OEL6.5, x 86-64)
-12 c Management Agent which monitors host and database (12.1.0.1)
The server worked fine for months until recently when the computer has restarted abruptly. Abrupt restart has occurred several times in the past, but this time, he had a problem when restarting. The DBSERVER when a startup starts the SGC and the AGENT. WHO starts perfectly, but the AGENT does not start. On trying to start the agent, it displays the following error message:
[orcl11204g@dbserver bin] $. / emctl start agent
Oracle Enterprise Manager Cloud control 12 c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Starting Agent... failed.
Manager of target failed to startup: targets.xml was rejected: loaded with a token incorrect agent
See emctl.log and emagent.nohup in: / home/u01/oemrel3/agent/agent_inst/sysman/log
[orcl11204g@dbserver bin] $
The targets.xml file contains the following information, which do not seem to be of any help:
[orcl11204g@dbserver emd] $ cat targets.xml
<? XML version = "1.0"? >
<>targets
< / objectives >
[orcl11204g@dbserver emd] $
Anyone can provide assistance in such circumstances?
The DBSERVER repository database, the auditor and the who are running, while the agent is down. VM12, listener and agent database is running. Is there another file that should be checked for more information?
--> $/ AGENT_INST/bin/emctl stop agent
If the agent does not stop is free then kill all the background process agent first grepping for agent perl and java process only
--> Move your existing target.xml file
MV target.xml target.xml.old
--> Create an empty file targets.xml under/AGENT_INST/sysman/MDTs with the below content
--> Start the agent of
$AGENT_INST/bin/emctl start agent
That starts agent but without all the targets in targets.xml
To the discovery of targets saw agent console resynchronization
Concerning
Krishnan
-
Is it due to malware? How to convert these files to their form of moose?
Hi Raffey Hassan,
· Did you do changes on the computer before the show?
· You have security software installed on your computer?
Changed file .exe file names, the reason might be that the computer is infected from virus or malware.
I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.
Let us know if that helps.
-
LDAP users in the repository Identity Manager (Administration tool)
I was connect LDAP server then I need to change the level of logging in the user
but I can't see the domain users on the identity of the directors of Bi tool Manager
Identity Manager of the Administration of BI tool - error was:
[nQSError:43113] The message returned by OBIS.
SecurityService::assertUserWithLanguage [OBI-SEC-00018]
Identity found "domain_user_name_here", but could not assert
Published by: user11957406 on June 5, 2013 13:48Try this, whatever your question
Tools-> utilities-> options-> repository and set the logging level.Thank you
http://cool-bi.com -
cluvfy returns the "/tmp/" path does not exist and cannot be created on nodes
Hello
I'm installing Oracle RAC for SAP to AIX 5 L.
After performing due diligence for the installation of cluster service, it returns the following message:
"/Tmp/" path does not exist and cannot be created on nodes
This meessage happens after checking access node and the phases of user equivalence.
This is my complete log:
pr_bd01/oramedia/clusterware/Disk1/cluvfy / > stage pre - crsinst - n pr_bd01, pr_bd02./runcluvfy.sh
Conducting due diligence to install cluster services
Audit accessibility of node...
Verification of accessibility node from node 'pr_bd01 '.
Verify the equivalence of the user...
Check of user equivalence passed for user 'oracle '.
ERROR:
"/Tmp/" path does not exist and cannot be created on nodes:
pr_bd01
Audit will proceed to nodes:
pr_bd02
Check prior to the installation of cluster service failed on all nodes.
The directory/tmp is a shared file system and oracle user can write and read
User Oracle ID is the same in both nodes
The dba group ID is the same in both nodes
Oinstall GID is identical in the two nodes
The primary group for the user Oracle is oinstall
Where is my problem?
Thank you
Published by: user8114467 on 02/27/2009 07:17You can also run with - verbose flag - what is the difference between / tmp on 2 machines - define export CV_DESTLOC = /.
-
The Windows Task Manager - showing processes from all users
Is it possible to get the Windows Task Manager to view all default processes?
When the system is running very slowly it's a great nuisance to have to activate the "show processes from all users' the after you have opened the TM and waste valuable time in the process identifying guilty.
Winston
Hello
I don't know of a way well there could be a... Here are some tips of perfomance and tools that can
also be used as a troubleshooting tool.I just realized that if UAC is disabled him show all users remains active.
----------------------------------------------------------------------------------
Process Explorer can be very useful for you.
Be careful that a lot of these programs and services really need run and often remove some fact little
at the speed of the machine while making the less easy to use machine.Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
Method 1 using Windows Defender will tell you more specific information about each program.
---------------------------------------------
It's a little more complicated that you might have a few running services that you can do without.
Also some programs add services that might not really need to start automatically.
To see these compare these in Start - type in the search box-> find Services at top right click on RUN AS ADMIN as the default Vista as shown here by BlackViper. Ignore and who are disabled (which do not run) or manual (which work only on request) - for any automatic or automatic delayed start you can post them here if you need help to decide if you should run. Some of these can be assigned to the stop and
Manual if the program calling can run them as needed.BlackViper made also some improvements to default windows services but I wouldn't do those unless you
really understand the full meaning of change a default service. Then use it as a tool to compare.Windows Services - list by default.
http://www.blackviper.com/WinVista/servicecfg.htmWhatInStartup - free - disable/enable/remove of programs at Windows startup
http://www.NirSoft.NET/utils/what_run_in_startup.html-----------------------------------------------------------
Here are some tools that will help:
Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I had the virus 'file system' and ran the Microsoft Essentials who kidnapped... Then the screen turned grat and all my tyop desktop icons disappeared and my files... I tried to use the restore but it wouldn't return back or in SafeMode... also, I get a notice that the Task Manager is disabled? How can I turn back?
Hi David McGeady.
· You are able to open in safe mode Task Manager?
Follow these methods.
Method 1: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 2: It seems that the virus is still there. Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.
Method 3: Create a new user account.
How to create and configure user accounts in Windows XP
http://support.Microsoft.com/kb/279783
If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.
How to copy data from a corrupted to a new profile in Windows XP user profile
-
Need a virtual copy of Windows 95 because of the incompatibility of file system
I used to have an operating system of Windows 95 years in its hayday, and I have had several games that I liked to play on it. Unfortunately, due to the configuration of NTFS file system and the fact that my machine is 64 bit, Windows 7 Home Premium system, means that it is totally incompatible with these games. So my best option is to recreate the environment of Windows 95 (I tried compatibility mode). I don't know where my old copy of the operating system installation disc fled to (I moved twice), and I'd rather get a copy legitimate ISO (that I could easily have created with the drive) to make a virtual machine in order to play these games even once.
Now that you've read my story of misfortune, is it possible to get a legitimate copy of Windows 95 from Microsoft operating system more?
Nope. Check Craigslist, eBay or yard sales.
I have about a dozen CD supplied with the OEM systems... Some are still in plastic wrap! If you could use one of the people, are in the United States and can wait a few days for the USPS, I can send you one (toll-free). I don't know if they key is still attached or who has been attached to the computer. Let me know. You can email me at dharper * at * mstechpages.com and I'll get away from you. I don't have any best retail, AFAIK, just OEM.
-
Unable to defragment the hard drive get a message that says: incosistancies in the file system
Original title: cannot defragment the hard drive
I have windows xp. All dates are updated. Whenever I try to defragmant my c drive I get a message that says: incosistancies in the file system and told me to run chkdsk and scan disk and try to defragment again but I keep getting same message. How can I fix it?
Hi cliffordsevec,
Follow these methods.
Method 1: Follow these steps:
Step 1: Relocation of defragmentation
(a) in the disk, find the directory c:\Windows\Inf. If the system directory is not on the c: drive or not named Windows, find by clicking on "Start", then "run" and type %Windir%\Inf in the area.
(b) find the file called dfrg.inf.
(c) right click on the file and select "install".
Step 2: Repair defrag
un) Click on "Start", then "run", run this command: regsvr32 dfrgsnap.dll.
(b) click "Start", then "run" and execute this command: regsvr32 dfrgui.dll.
(c) run Defrag.
Method 2: Follow the steps in the article.
Disk Defragmenter does not work on a Windows XP-based computer
http://support.Microsoft.com/kb/922379
Method 3: Follow the steps in the article to check the drive for errors.
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265
Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.
-
Rebuild the file system of the patch in Oracle Apps 12.2.3
I worked on a test environment for applications Oracle 12.2.3, mainly in the field of the adoption. I encountered an error executing adoption phase = prepare and adopt phase = fs_clone.
I have followed this issue down to missing files in the fs2 (edition patch) file system. In fact, almost everything is missing, including the APPL_TOP directory. I think I deleted the patch directory while fixing other problems encountered when executing adoption.
Is it possible to delete the file system obsolete runtime adoption before there was a chance to populate the new file system? For example, during a session of correction your patch won't install or start-up, so you give up the file system and run adoption phase = cleanup_mode = full cleaning.
Is it possible to rebuild the fix file system by using adoption? I thought it was a possibility, but have been unable to use adoption do that because he fails to run. Running adoption phase = prepare will fail because of missing files in the stage of publishing and adoption = actualize_all patch will fail because it cannot work if it is not in a fixed cycle.
Thanks in advance!
We discovered that it was. We have several test environments on our servers, and each has its own oraInventory in oraInst.loc. A change has been made to the oraInst.loc and is no longer, he pointed to the locations needed oraInventory. This caused adoption phase = fs_clone to fail because he could not find the correct houses. You can replicate this at any time by changing the phase adoption oraInst.loc and race = phase fs_clone or adoption = prepare. Once us returned to the correct oraInventory, fs_clone worked and populated the directory correctly, automatically. There is no mention of this requirement in the documentation, so we had lot to track down the problem.
Maybe you are looking for
-
I have to make the configuration of the browser test on Firefox 14. Where can find the exe to install the same on my mahcine to windows7. I'm strictly looking for Firefox14 only. Thanks in advance for the help.
-
I am being charged $9,99... Why?
My AmEx is billed each month... I can't find the churn.
-
Apple TV is used by someone else
Why is that when I'm streaming video from my iPad to my Apple TV with AirPlay, I get a message that says "this Apple TV is currently used by someone else. It happens all the time. It stops everything I look and give me this message. I have Apple TV s
-
Portege R400 - A2DP profile does not work using BT Stack 5.10.12
Hello I try to get my Toshiba R400 connected to Logitech wireless music station. I can't find the camera, but when pairing, it says something like error when connecting with remote device, please try again. He doesn't want authentication in contrast
-
Modifier UN figure of the NumericEdit according to the cursor
Hello Plug-in currently a NumericEdit on which I could do Venet UN number according to the location of the cursor. For example if I '1000,0' in the NumericEdit, I place the cursor on the dozen or so and I do Venet the mouse wheel then I see you incre