the left margin is shifted to the left

Hello.

I have a problem during the copying.

When I copy an original copy, the left margin will move to the left side on the copy.

In addition, the text is not correctly printed on the copy.
The image is rotated counterclockwise approximately 1 degree - the right side is higher than about 3 or 4 mm then the left side.

Is it possible to calibrate the printer so that the copy be like the original?

Thank you very much.

Best regards.

Phantolix

Thanks for the information.

I will bring it to the store where the product was purchased.
Photosmart 5510 is only 6 months old and still under warranty.

So, you can close this topic.

Tags: HP Printers

Similar Questions

  • LaserJet Pro 400 M401n: How to set the margins for binding up and left for LaserJet Pro 400 M401n

    I am connected to ePremis (medical site) that allows me to print the selected medical forms. ePremis uses the default printer to print the selected form.  The selected form should be printed on a preprinted form that I load into the tray of the printer.

    The problem is that ePremis does not provide an option to set gutter margins and print aligns correctly with my pre-printed form. The print position is a little weak and must also be shifted a little to the left. I need to reduce the high binding margin to move the position of superior print on the page and the left binding margin must also be reduced to move the print a little position to the left so that the printed data will properly align with my pre-printed form.

    Since ePremis does not offer an option to set the margins of the gutter, I need to be able to set the margins of the gutter through the printer driver, but there is also no option provided by the printer driver dialog box to set the margins of the gutter.  :-(

    Is it possible to set the printer LaserJet Pro 400 gutter margins?  I see the margins left and right options in the driver dialog box printer, but they are grayed out and cannot be changed.

    I have another printer, Kyocera laser printer, and I don't have this problem with the Kyocera because it offers the possibility to set gutter margins in the printer driver dialog.  I wonder why the LaserJet Pro 400 does not provide this option?

    I perhaps could solve this problem by sending PCL6 commands to the printer before printing?  I'm a programmer and am open to this option if it would work.

    Your help would be much appreciated.  Thanks in advance!

    Setting margins generally depends on demand - but (you say) that your application does not allow this.

    Some printers provide functionality of saving images , whereby the position of the image of the page onto a physical sheet can be adjusted to the printer, usually on a basis of by-tray.

    For example, with my Laserjet Pro MFP color 400 M475dn, the appropriate menu/menu item is described as follows:

    Note:

    • This setting applies to the bar up this that changed, so will have an impact on all the tasks using the specified status bar.
    • Not all printers support these features - I have no idea if your LaserJet M401 exercises or not.

    With regard to the '... sending the commands to the printer before printing... PCL6«» :

    • PCL6 (PCL XL) rather more autonomous than PCL5is, so I'm pretty sure that nothing you can "send" to the device to influence the outcome of the following printing.
    • Even with PCL5 print jobs, standard printer drivers are "overcome and-tail' with universal output language (UEL) escape sequences (which reset the device to the market environment (user - default)), which would be too mount sequences exhaust specific PCL5 previously sent to the device.
  • What is the wheel yellow in the left margin of the subject field of the thread pane?

    Today, some, but not all of the unread mails had a small symbol yellow like the Sun wheel in the left margin of the pane Inbox thread.
    The symbol appears in the same area where the other e-mails can have small arrows indicating that I responded to an email.

    When I click on a such mail, it goes to State reading (normal font as opposed to "BOLD"), and the wheel also goes.

    While trying to ask this question, I had to request a reset password, and after you receive that mail, the last unread message remaining which had this wheel, had more of her. I am therefore unable to make a screenshot showing the symbol. However, it consists of a circular yellow box with a large number of short black lines in the radial direction, places evenly along the perimeter inside the yellow box, forming a ring or radial lines.

    If you know the symbol, what you call it? What he's trying to say?

    In which case it is important, I use an IMAP account.

    Looks like it's the new message indicator when using threads messages.

    List icons.
    http://KB.mozillazine.org/Icons_-_Thunderbird

  • Is it possible to move email accounts in a different order... in the left margin, when you have multiple e-mail accounts

    I have several e-mail accounts. As I added each e-mail account, Thunderbird added their order entered. I would like to change the order in the programming on the left margin. for example ".
    Joe@123
    Jim@123
    George@123 it comes to existing order, but now I want to

    Jim@123
    george123
    joe123
    I know I could delete and add in a different order, but I have thousands of emails that I don't want to lose.
    Any suggestions would be greatly appreciated,

    https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/

  • Just upgraded to 32.0.1 and drop down menus were shifted to the left. How can I fix this?

    I just upgraded to 32.0.1 for Mac, and from the drop down menus were shifted to the left. I tried to reset. I tried to reset Firefox and the problem was not resolved.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

    You can check for problems caused by plugins and all the plugins to "Ask to activate" on the page "Firefox/tools > Modules > Plugins" (plugins are not affected by the Mode of Firefox safe)

  • Web site fidelity problem - when filling out forms for 5 tables of column, the left margin print with a left margin of 3 inches, thus losing the 3 columns on the right of the printed table. d instead prtints with 3 inch r

    The url of the problem page is shown below. When the 4 additional columns will have been completed and sent to the printer, the left margin is 3 ", which does not show the 2 right hand colums in portrait mode.
    Before installing latest versions 5 and 6 of Firefos all columns have been printed.

    In my first attempt (Firefox 6), he did cut the 2 right columns, so I followed the advice of the-edmeister and changed to landscape. Then I reset my portrait layout and with "Shrink to the width of the page" checked, all 5 columns show in portrait view.

  • Shift-left-click to save the file

    Shift-click-left used to trigger "save file."
    This (re-) configuration to the old behavior?

    See: http://www.7is7.com/software/firefox/shortcuts.html

  • PSC 2510 double prints the left margin - transport stops

    Hi, my 2510 double print the left margin so as to look as if the letters are ghosts, now it started to leave a wide width of letters about an inch from the left margin. At the same time, he will start a print job only to have the transport stop about 1/4 of the way, I have manually position the carriage to the position of Park - the menu says so is printing - it is not. I unplug the AC for 10 seconds and when I reconnect the printer resets and continues its merry way, until at the latest.  Thank you Kent

    You probably have a buildup of ink on the MICR band used by the printer to tell where is the transport.  Gently clean the Strip as shown here.  Don't forget to respect the warnings, if you do not you may damage the delicate MICR band.

    Kind regards
    Bob Headrick, Microsoft MVP printing and imaging

  • Vertical line on the left margin of all pages printed (1200 HP)

    Hello:

    Everything I print, on some paper, a vertical line scraggly appears in the left margin area. In my view, it is ink that has leached out, but I don't know where or how clean it. Ink cartridge seems solid. TIA and Happy New Year.

    COS

    Take a look at your fuser unit, could be something wrong with that.  Make sure you leave cool before you go poking in there.  If this isn't the case, it might be a mark on your imaging drum.

  • OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

    Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

    HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

    HI @philg2,

    I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

    I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

    • Connectivity:

      USB: Check that the USB connection from your computer to the HP product works properly.

      Network: Verifies that the network connection between your computer and your network is working properly.

    • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

    • Driver: checks the driver missing or corrupt files.

    • Device Manager: check the problems in Device Manager that could prevent printing.

    • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

    • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

    • Port Match: check the port settings for the HP product.

    • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

    • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

    • Print settings: check and adjust the print quality settings.

    • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

    • Scan tests: check the scanning mechanism, drivers, and registry entries.

    Source:try the HP Print and Scan Doctor for Windows

    Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

    If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

    • If you see only the Green checkmarks (), the tool did not find any problem.

    • If you see green sides (), the utility identified a problem and fix it automatically.

    • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

    • If you see a red X (), follow the onscreen instructions to fix the problem.

    Thanks, I look forward to hearing back on your part.

  • How to convert the string to a full decimal point and left shift

    Hey guys I tried to convert gps string to an integer, like this

    A string that is 2467.8976 and I need to convert it to a similar integer as point of this 2467.8979 so that I can shift the decimal point to the left (24.678979) which i coudnt do it with the chain. It's just been my 2 weeks with the labview so be gentle. Thank you

    Hi Awais07,

    Once you have created an indicator that signals the output of parsing the string, right-click on this indicator > display... Format > increase the value of the digit 9

    Kind regards

    Lennard.C

  • Problems of bit shift left in the node of the formula

    Hello

    Sorry, but my English is not good.

    I am trying to run a bit left SHIFT in the node of the formula, but the left SHIFT does not work as I expected.

    uInt32 parametro[5];
    float32 valorAmostra;
    int16 indiceAmostra;
    uInt8 indiceResposta;
    int16 controle;
    int32 valor;
    int8 i;
    
    for(i=0; i<5; i++)
        parametro[i]=param[i];
    
    valor = parametro[5]<<16 | parametro[4]<<8 | parametro[3];
    controle = parametro[1]<<8 | parametro[0];
    
    indiceAmostra = (controle & 0x3FF);
    indiceResposta = (controle >> 10);
    
    valorAmostra = valor & 0x7FFFFF;
    valorAmostra = valorAmostra*(2.4/8388607);
    
       if((valor & 0x800000) == 0x800000)
          valorAmostra = valorAmostra*(-1);
    

    the input param array is uInt8 type, because I saw in other topics that does not move with uInt8,

    I copy the values in the array param to parameter , which is of type uInt32, but still does not work.

    Test the input parameter with the following values:

    [] param = {10,14,10,0,16}

    the returned valorAmostra is 0,00117188 then it should be 0,300003.

    Can someone help me please?

    Portuguese:

    OLA,

    Is um no bug no LabVIEW para esta operacao. Este bug devera ser corrigido em paid futuras. UMA Solução para esta down e use int32 ao investment of um ulnt32 um.

    Any doubt please between let em.

    Obrigado.

    English:

     

    I studied the problem you are having, and it turns out that this is a bug that has already been reported and documented. The work around is to use int32 instead of uInt32.

    Thank you.

  • Various HP LaserJet: Printer Control Language (PCL) to help to increase the left margin


    Escape sequences the PCL (GUE, printer reset, set left offset, move the horizontal slider) in the separator page will be almost certainly ignored if (as is likely) your application is the use of standard Windows printer driver to generate the print job, because orders generated:

    • Will begin with another sequence of LSE, which resets the default power values (so too riding all the separator page settings).
    • Will contain the size of the page selection and definition of margin sequences as requested by the calling application.
  • Shifted to the left of taskbar background icons

    original title: change of taskbar background

    Suddenly, all my desktop icons have shifted to the left, including the world of Windows in the lower left of the bottom task bar.  What I've done and how to move their return to the screen?

    Hello

    I suggest you to unlock the taskbar and then move the icons where you want.

    To do

    (a) right click on the empty space on the taskbar.

    (b) click on Properties

    box c) uncheck lock the taskbar

    Now try who move the icons in the bar at you desired tasks.

  • ScanJet Professional 3000 cutting the margin left only on the back side of 2 faces scan

    I have two scanners SJ 3000 Pro - work under Win7Pro.  Two a sides fine analysis, the other clips off the coast of about 1 "from the analysis of the back side.  Any ideas on how to fix?  Should not be roller/alignment as it works through the scanner only once and it scans both sides at once.  I'm puzzled.

    Solved.  Open scanner and found that there are a bunch of finger as paper tape which had been delivered with one end of it stuck to the window of scan back!  Deleted and it is stuck back where it was supposed to be and voila - it is more chops off the coast of the 1 "off the coast of the left margin.

Maybe you are looking for