the Magic Mouse that came with my iMac to work but it does not recognize HP USB Wireless Mouse

Similar Questions

• my pc does not recognize my usb camera, what can I do

  my pc does not recognize my usb camera, what can I do

  my pc does not recognize my usb camera, what can I do

  Try different usb ports, see if that helps... While doing this, turn your pc into a good place so that you hear when it detects your camera...

  If all above fails try connecting your camera again to all the usb ports again, but this time... try to switch to the Panel control, and then, in the hardware section add new material see if that helps?

  Visit your website maker of uptodate version of your camera driver camera and more help!

• Uploaded image of Windows 7 Professional will not accept the product key that came with my computer.

  I have a Dell laptop, Studio, approximately 1 year, delivered with Windows 7 Professional installed - the label with the genuine product key is located at the bottom of the laptop. Shortly after I got it I deleted the recovery partition to make room for Linux installed next to Windows. I had problems with Windows system (mainly caused by me bad installation software and drivers without proper backups) so I decided to reinstall Windows. I had already deleted the recovery partition and wouldn't use it anyway because I prefer a clean system without unwanted from the manufacturer in this regard. I did not receive a Windows operating system installation DVD with my computer, so I downloaded a (64-bit Windows 7 Professional, the same as the original operating system) which already had SP1 on it (the version of Win7Pro installed Dell's not SP1). I installed Windows on this drive and attempted to activate using the product key that came with my computer, but it would not accept the key. I don't have time to try to solve this problem, but now the period of one month is up and my computer does not work correctly.
  I suspect that the problem may be due to me using the SP1 disc. If this is the case, should I reinstall Windows again? I have * NOT * GOING to buy another product key when I have already paid for a genuine version of Windows. I just want to be able to use my computer without the ridiculous slowdowns caused by pre-installed software and the way I chose.

  Thanks for any help with this problem, I really need fo fix my computer.

  original title: Activation error, Windows 7 Professional
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  Windows license Type: OEM SLP

  The key to your report is your OEM SLP key which can not be activated. This isn't the key to COA.

  but the key I tried to use is what I copied on the COA the day I got the computer of the book where I put all the information on my computers.
  
  
  Is the product key in your book is the partial key in your report?
  You must change the product key to the one on your COA.
  Check your compartment of the COA.
  The other solution is to reinstall your Dell OEM recovery disks or recovery partition. This self will activate your computer.
  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

  I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

  If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

  Lightroom Journal | Tips and advice straight from the Lightroom team.

• I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the

  I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the file at all, I tried to turn the file. Fortunately, he rotates the photo and turned it back. Why the program allow me to create layers?

  You click on Expert in pse before trying to add layers?

  Or it is possible that the image is 16-bit/channel.

  In photoshop elements go to Image > Mode and click on 8-bit/channel and see if that makes a difference.

• Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Need of this camera camera raw 8.2 or later. Cannot use this CS5 version. You will need to download the 9.1 free dng converter and convert your images to DNG version CS5 can handle.

  Using Photoshop | Digital Negative (DNG)

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc.

  I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc. I'm on OS 10.6.8

  The requirements for the SuperDrive Apple USB are:

  The system configuration required

  Compatible with the following computers:

  MacBook Pro with the Retina display

• When I hook compruter to the tv it works but it does not not to erase the s video cable

  When I hook compruter to the tv it works but it does not not to erase the s-Video cable

  Hello

  1. are you unable to connect the TV to the computer via the S-Video cable?

  2 what exactly happens when you try to connect the S-Video cable?

  3 how you have connected the TV to the computer?

  4 do you encounter issue with the clarity of the video when it is connected with the S-Video cable?

  Please provide more information on the issue so that we can better help you.

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• It indicates a problem with your pc to restart, but it does not restart.

  

  I get this screen whenever I turn on my computer. It indicates a problem with your pc to restart, but it does not restart. it restarts only by its self if I click on stop down, so instead of closing, it restarts. I don't know how to solve this problem so if someone could help me that would be great.

  Original title: C:/Windows/MEMORY. DMP

  Thank you very much!

  All attached files of the DMP are the bug check DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  -Although they are the same bug verification, we have two different drivers, the origin of the problem. I'll discuss one both for ease of reading.

  1:

  BugCheck D1, {fffff980417c4f40, 2, 0, fffff880050324d8}

  1st argument is fffff980417c4f40 , which is the memory that has been referenced. Despite the memory be labeled as "invalid", it is really valid memory, but it is disabled on the swap file, so we cannot paginate it to 2/higher IRQL. Given we are at level 2 IRQL at time of the accident, the checked bug.

  3rd argument is 0 , which indicates a failure of the read as opposed to a write operation. In other words, that he was trying to read the memory, as opposed to write to it.

  2: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '1942faa8 fffff802' 6f4d2869: 00000000' 0000000 a fffff980 ' 417c4f40 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
  fffff880 '1942fab0 fffff802' 6f4d10e0: 00000000 00000000' fffff980 '417c4ca0 00000000 00000000' fffff880' 1942fbf0: nt! KiBugCheckDispatch + 0 x 69
  "fffff880'1942fbf0 fffff880'050324 8 d: 00000000 ' 00000000 fffff880 ' 01e7957f 00000000'00000000 00000000'00000000: nt! KiPageFault + 0 x 260 (TrapFrame @ fffff880'1942fbf0)
  fffff880'1942fd80 00000000' 00000000: fffff880 '01e7957f 00000000'00000000 00000000'00000000 fffffa80' 0a9a4230: tap0901 + 0x34d8

  ---------------------------

  2: kd > .trap fffff880'1942fbf0
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 000000000000004c rbx = 0000000000000000 rcx = 000000000000032e
  RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff880050324d8 rsp = fffff8801942fd80 rbp = fffff8801942fea0
  R8 = 0000000000000000 r9 = fffffa800a9a4230 r10 = 0000000000000002
  R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI ng nz cy
  tap0901 + 0x34d8:
  "fffff880 ' 050324 d 8 83bba002000000 cmp     dword ptr [rbx + 2A0h], ds:00000000 0 ' 000002-0 =?

  On the statement, that blame us, we doesn't have a subtraction to one operand of the other to compare if the operands are equal or not to a pointer stored in rbx. The problem driver in charge of this statement was tap0901.sys , which is the driver of OpenVPN.

  2:

  BugCheck D1, {fffffa80197fffff, 2, 1, fffff88006670927}

  1st argument is fffffa80197fffff, which is actually an invalid address.

  3rd argument this time also is 1 , which indicates a failed to write to this address.

  0: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff801'2f95b688 fffff801 308 c 6869: 00000000' 0000000 a fffffa80'197fffff 00000000'00000002 00000000'00000001: nt! KeBugCheckEx
  ' fffff801 '2f95b690 fffff801' 308c50e0: 00000000 ' 00000001 fffff801 ' 2f95ba58 fffffa80 '106fe000 fffff801' 2f95b7d0: nt! KiBugCheckDispatch + 0 x 69
  ' fffff801'2f95b7d0 fffff880'06670927: fffff801'2f95ba58 fffffa80 ' 107000 d 8 fffff801 ' 2f95bc30 00000000' 00000000: nt! KiPageFault + 0 x 260 (TrapFrame @ fffff801'2f95b7d0)
  fffff801 '2f95b960 fffff801' 2f95ba58: fffffa80 107000 d 8 fffff801 '2f95bc30 00000000' fffff801 00000000' 2f95bc30: bckd + 0 x 2927
  fffff801'2f95b968 fffffa80 107000 d 8: fffff801'2f95bc30 00000000 00000000' fffff801 '2f95bc30 fffff801' 2f95ba00: 0xfffff801'2f95ba58
  ' fffff801 '2f95b970 fffff801' 2f95bc30: 00000000 ' fffff801 00000000 '2f95bc30 fffff801' 2f95ba00 fffff801 ' 2f95ba58: 0xfffffa80 107000 d 8
  fffff801'2f95b978 00000000' 00000000: fffff801'2f95bc30 fffff801 '2f95ba00 fffff801' 2f95ba58 00000000'00000206: 0xfffff801'2f95bc30

  ---------------------------

  0: kd > .trap fffff801'2f95b7d0
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  rbx Rax = fffffa80197fffff = 0000000000000000 rcx = 7e2d6c3d0a970000
  RDX = rsi 0000000000000008 = 0000000000000000 rdi = 0000000000000000
  RIP = fffff88006670927 rsp = fffff8012f95b960 rbp = fffffa80107000d8
  R8 = 0000000000000065 r9 = 0000000000000001 r10 = fffff8012f95bc30
  R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl nz na po nc
  bckd + 0 x 2927:
  fffff880 ' 06670927 c60000 mov byte ptr [rax], 0 ds:fffffa80' 197fffff =?

  The statement, that blame us, we could not move a pointer that has been stored in the rax register. Rax has the wrong address in the 1st argument, which is fffffa80197fffff. The problem driver in charge of this statement has been the K9 web parental filter driver.

  ---------------------------

  So, what's the problem here? The problem is the way you have too much security going on and there are conflicts that occur.

  You have AVG safe Search + K9 + Norton web filter. Delete the first two and all should be well your VPN should no longer be crashing.

  If accidents continue, throw too Norton and replace it with Windows Defender for now. FWIW, I would never install Norton on my own home systems... I see it cause a lot of daily problems.

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  Kind regards

  Patrick

• Windows 7 Desktop w/printer, my desktop XP in network computer, cannot print bc I wonder for the current print driver, I got a current version, but it does not recognize it? How can I get the printer to work?

  I have a desktop computer Windows 7 connected to an HP laserjet 4050N printer, when I try to print from a computer to Office XP, via the network, I wonder for an updated printer driver.  I downloaded the latest print driver, but it does not recognize the file inf and again requests a current print driver.  How can I get the XP desktop to print on the printer connected to the Windows 7 Desktop?

  Hello

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18322&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=25475

  For your reference: How to use Windows XP to share a printer with other people on your network: http://technet.microsoft.com/en-us/library/bb457001.aspx

  http://TechNet.Microsoft.com/en-us/library/bb456988.aspx

  To connect to a printer on a network: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Hope this information is useful.

• How can I fix the "drag and drop" feature in Windows 7? It used to work, but now does not work, for no apparent reason!

  How can I fix the "drag and drop" feature in Windows 7?  It used to work, but now does not work, for no apparent reason!

  What happens when you try?  Make sure you drag the icon image and not the text of the name.

  If it still doesn't work there are some registry changes that can try to alleviate the problem.  But because the changes to the registry are tedious and dangerous, I recommend to leave the system to repair it for you.  Here's how:
  1. Type of restore in the search box of the start menu to find and open to restore system files and settings from a restore point.
  2. Click Next, choose a date before the problem started, then click Next once more.

  • This process only takes around 2 minutes and only restores your system files/settings: it will not affect any of your files, documents, photos, emails, or anything else.
  If the system restore does not resolve the problem try this to replace missing or corrupted system files.  Here's how:
  1. Type cmd into the start menu search box, and then press Ctrl-Shift-Enter to launch as administrator.
  2. At the command prompt to start the File System Check, type sfc/scannow .

• How to cancel my subscription to Adobe? I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

• Can I use the Bluetooth Dongle that came with my Kit with a different wireless keyboard HP wireless?

  Hello world! I am brand new here and although I did some research on this subject I couldn't find it - forgive me (and point me in the right direction!) If this has already been covered.

  I just bought a HP Pavilion, a touchscreen all-in-one. It came with a wireless (dongle, keyboard and mouse) keyboard kit. I don't like the keyboard at all, lol and would lke to use another keyboard wireless I have (a GE Board), BUT I do not have a bluetooth usb dongle - I have that the dongle supplied with the kit of HP wireless.

  I tried to get this dongle to talk to my new keyboard, but it does not work. I can't tell if it's user error or if she will NEVER speak to him, lol.

  Can I use it? Or do I have to buy one separately bluetooth dongle which is compatible with the computer and GE keyboard?

  Thank you for ANY idea - I'm going crazy here!

  Ali

  Hello

  Based on the following specifications, your machines don't have a Bluetooth:

  http://support.HP.com/us-en/document/c03791255

  GE keyboard is a BT device, you can use something like one of the followind dongle:

  http://www.latestbuy.com.au/Bluetooth-USB-dongle.html

  The dongle that comes with your computer may look the same, BUT it uses a different technology.

  Kind regards.

• How do I install the graphics driver that came with my Satellite A210

  Well my previous my GPU overheating problem has continued and I go back to the drivers that came with my laptop.
  Can someone guide me on how to do it?

  That's simply

  Go to the page of European driver of Toshiba and download the graphics driver from Toshiba designed for you notebook series.

  Then start the Device Manager and uninstall the graphics driver current.

  Restart the computer and then install the graphics driver downloaded on your system

  That s all ;)