The MAX properties of the device button is disabled / grayed

Similar Questions

• Why the 'Analyze' button is disabled?

  I was wondering why the 'Analysis' button is disabled in the new disk optimizer tool. I'm able to optimize partitions of hard drive of my computer as usual, but I can't check if it must be optimised beforehand.

  Is the drive a SSD or Solid State Drive?  If so, that's why.  These readers of should not or never be defragmented.  It puts much wear and tear on the device that have a shorter life expectancy.

• Event of exit/close application trap on exit/return of the device button

  I developed an application in Sib. I want to intercept the output/closing event of the request so that I can ask the user for the confirmation message.

  It may happen that the user will click the back button on the BB device accidentally. If I don't want it of happen and will show the confirmation message.

  There are a variety of ways that you can incorporate it, but I don't know of a hook that will let do it without changing your code.

  The following suggestions can help you change your code.

  (1) If your application has a home screen, i.e. that it all comes down, then override the close() method and replace with your dialogue.  If the user wants to get out, then call super.close ().

  (2) If you have several places that emit the system.exit(), replace it with a call to your own method of "release manager", that shows the same dialog and emits only the system.exit() if confirmed.

• How to program the events for the back of the device button

  Hi all, I wanted to ask, is it possible to change the action of the back button on the blackberry device? I want to program my application after the user login, the back button does not return to the screen connection but moved into the background... Thank you

  's called it the ESC key. You can override onClose, for example, which is called when you try to close a form.

  or you can crush keyChar and check for Characters.ESCAPE

• My computer or Windows Exployer do not recognize my CD/DVD equipment. I checked and the best driver currently installed, but the device is apparently disabled. Help!

  I went into the properties of the device, but could not find a solution.

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• How has disappeared or the logout button to disable wifi on Win 7?

  Hi is possible to missing or disable the disconnection from the wifi button.

  I met students cell phones they always disconnect the wifi and play the game of Chrome...

  Hello

  It depends on the General configuration of the computer.

  WIFI can be turned off or low can be hidden. Disconnect the WIFI would not play games that don't need Internet.

  If not, please explain how computers are configured.

• Anyone see the option to transfer disabled/grayed out in the latest iOS 9.3.1?

  I used handoff successfully for a long time until this week. All the settings on Mac are correct for both 9.3.1 iOS (iPhone 6 Plus) and MacOS 10.11.4 have the same credentials to iCloud. However on my iphone iOS, the transfer option (under settings > > General > > Handoff & App Suggestion) is grayed out. Have power rolled my phone once or twice without success.

  Also I was wondering, and by checking with my enterprise IT if MDM provisioning profiles limit the transfer feature? To prove otherwise, anyone else seen this problem? I did a google search and see no others have reported the same problem.

  You say that you rolled your iPhone power nothing works. Did you do a reset? Hold the sleep and wake buttons at the same time... continue pressing the two buttons until the Apple logo appears. This usually fixes most of my problems.

• Why left click the "back" button is disabled?

  For some strange reason, the back on my installation of Firefox button is no longer functioning normally. I can still right click on it to select the previous Web sites. But it's greyey at any time with no way to select with a normal left click.

  I refreshed Firefox and the problem persists.

  It turns out that there was something in conflict with mozilla in the openSUSE repo depot. I deleted the repository and is returned to the original repository in openSUSE.

• Cannot use the fx button to disable the effects.

  I can't use this button as the box is not there and I added some effects I just composed it before.

  

  I think that you will get a lot of benefit to visit this page.  With After Effects, you must start at the beginning or endure unnecessary hours (or more!) of frustration.

  To answer your question directly, you do NOT apply an effect.  There is no indication of an effect in the column of fx switches Panel, which is visible in your screenshot.

  Do yourself a favor: don't try to learn AE intuitively, or by following some tutorials designed to teach one thing of OWL.  Go through the basics.  You will regret if you do so, you should right now for AE your beginners mistake.

• input device touchscreen usb disabled and now the device disappeared

  To summarize for those who want a short version:

  Model: Sony VAIO Duo svd11225cxb

  Windows 8.1

  a. my touch screen of this device is * outside? Any way to reinstall the driver for the touch screen? Tech Sony said that the material is very good.

  b. in my efforts to solve the problem, I turned off a device in Device Manager and it now gone, no way to recover?

  Here is the full version:

  I have a Sony VAIO Duo svd11225cxb. After the recent updates, freaked out and kept touch screen back to the menu screen to start (and possibly other areas of the screen).

  We decided that so that the computer to operate, it should disable the touch screen. So we went to the Device Manager and disabled the "usb input device" under "human interface devices" which associated with the touch screen. Allow us went then back to him and found that the unit had disappeared from the Device Manager. I tried to install the next window touchscreen driver, but that did nothing. Any advice?

  Hi herschen,.

  Welcome to the community of Sony!

  Perhaps the question is just the driver. We will isolate the problem by following these steps:

  • Power cycle - turn off the laptop-> flip the unit and look for a button cell or a pin hole on the bottom of the laptop. Using a safety pin, press and hold the hole for 5 seconds.

  

  • Reset the BIOS to the
  • Go to Device Manager -> right click and Uninstall the driver/s under Human Interface Device (DO NOT REMOVE). Then restart the unit. The driver will be reinstalled.
  • Run the Windows Update and Vaio Update.

  Hope these helps.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• The button is disabled even if I well visited the link via Google

  When I search something in Google and find an interesting particular link, I see it. But when I want to go back to my list of research, it seems that the back button is disabled and it won't let me go back. It's obviously painful, I'm looking for a variety of things. The back button works perfectly sometimes but others it just doesn't work. Can someone explain this strange behavior?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons (McAfee SiteAdvisor) is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Bluetooth has disappeared from the Device Manager

  My computer does not detect bluetooth devices. I went to the bluetooth menu and unchecked and rechecked the boxes 'discovery' and so on. However, when I hit apply, the window became unresponsive and I forced to close. When I tried to repeat this, when you type apply I get a Bluetooth Service error message saying my device is disconnected (my bluetooth adapter is built-in). I went to the Device Manager and disabled the Microsoft Bluetooth Enumerator and generic adapter Microsoft to try to restart them. However, instead of just disabling, the owner made them disappear from the list (even show hidden devices will not bring them back). Now I have no bluetooth, the 'other' device any device and can not use bluetooth. I tried everything I can think and find on the net (reboot), update, etc.. Help, please!

  Vista Home premium SP1 running on an HP touchsmart iq770

  Hello

  Welcome to Windows Vista community responses.

  This problem occurs if one of the following conditions is true:

  • The Bluetooth support service has not been started.
  • The Bluetooth support service is not configured to use the local administrator account.

    Point of Bluetooth devices is not present when you open the control panel.
    http://support.Microsoft.com/kb/894035

  Click Start > right click on computer > Manage > Device Manager > USB controllers expand > right click and click on all the USB root hub and host controllers > restart if you are prompted or click check for material changes.

  Try to download bluetooth update from the manufacturer's Web site.

  Let us know if that helps.

  Concerning
  Anthony

• The NEW button disable Installation partitions - UCS - CSU.

  I have a C240 and I used the Cisco's UCS Server Configuration utility to create a RAID 1, now I am trying to create a new partition, but when I choose a free space, the NEW button remains disabled.

  I am a beginner in the world of the UCS, so if anyone can help me, I appreciate.

  Thank you.

  HI Erick,.

  What type of raid controller you have installed on this server.  If you have a controller LSI, I recommend that you try to configure the RAID using the WebBiosUility.  Here is a link to a document that you can walk through the steps of configuring this controller via this utility.

  http://www.LSI.com/downloads/public/MegaRAID%20Common%20Files/51530-00_RevF.PDF

• Why is my "sleep mode" not hightlited in the Start button?

  I can not put the mode 'sleep' in my computer windows 7 system of operating; It is not highlighted in the right button of shutdown?

  Hi, Irvin,.

  Here's a few things you can try to get this issue fixed.

  1 visit the computer manufacturer website and download the latest video drivers and then install them and check.

  2. If the problem persists, follow these steps.

  -Type Cmd.exe in start search and right-click on cmd.exe and select run as administrator.

  -Type powercfg /Hibernate on

  -Type powercfg - h

  (Print the results here coming in the command prompt window)

  It will turn on the hibernation. Restart the computer and check if the Sleep button is still gray.

  In addition, through http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions

  Hope this information is useful. If you have any questions, please let us know.

• How to activate the new button in the Workbench of invoice in Payables in 12.1.1

  Hi all
  
  In accounts payable, the new button in the workbench invoice showing off.
  I use 12.1.1 version.
  Could someone please help me how can I activate this new button.
  I am creating the invoice through workbench invoice no quick Invoice window.
  
  Thank you

  Hello

  This could be due to several reasons...

  Reason n ° 1 = you only access and not allowed to create invoices

  Survey Navigation responsibility for accounts payable = > bills > inquiry > invoices
  Entry Navigation responsibility for accounts payable = > bills > entry > invoices

  Reason 2 = explode on navigation ENTRY you always see the NEW button is disabled, this means
  accounts payable system does not allow the creation of individual bills, you must create only in batch mode.
  Check the value of the profile option ' AP: use invoice batch commands. If the value is YES, it is intentional that NEW button is disabled...

  Reason 3 = you use Navigation entry, your responsibility is not enabled for lots of bills
  The Bill create function could have been excluded from the responsibility...

  Kind regards
  Ivruksha