The MCSTRM service failed to start due to the following error: the system cannot find the specified file

Similar Questions

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• I get an error saying "the BCM42RLY service failed to start due to the following error: the system cannot find the file specified. '.

  Log name: System
  Source: Service Control Manager
  Date: 17/07/2011-21:12:53
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: ivan-PC
  Description:
  The BCM42RLY service failed to start due to the following error:
  The system cannot find the specified file.
  The event XML:
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      203523
     
     
      System
      Ivan-PC
     
   
   
      BCM42RLY
      %%d Ko
   
  original title: can someone please help...

  Hello

  1. you are using a Dell computer?
  2. What is the model number of your computer?
  3. don't you make changes to your computer before the problem?

  BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.

  Uninstall or reinstall a device

• Error 0 x 80070003 system cannot find path specified when you try to open the music folder

  Original title: error 0 x 80070003

  Opening of office music folder and clicking new folder, a new folder window appears and indicates "error 0 x 80070003...» the system cannot find the path specified. »

  What should I do to make a new folder?

  Thank you

  Newby0

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers for a better understanding of the issue.

  1. Since when are you facing the issue?

  2 are logged as administrator?

  3. where's the music folder?  Located internal or an external storage device?

  4. do you have an anti-virus installed on the computer program?

  5. are you aware of any recent software or the hardware in the computer changes?

  You try to open the file as administrator. Right-click on the file and select run as administrator.

  You can also try to launch an online scan and check if that helps.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  You can also start the computer in safe mode and check if the problem persists. If the problem persists, you can start the computer in a clean boot state, and check if all third-party software may cause the problem. Clean boot helps eliminate software conflicts.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• Event Viewer: Windows color system service failed to start due to the following error: the service did not demand launch or control in a timely.

  Whenever I start my Windows 7/64 on a motherboard Asus X 99 installation - WS pairs of the following event log entry are added in the journal of the repetitive events (12 times on every boot):

  ----------------------------

  -

  -

  7009

  0

  2

  0

  0

  0 x 8080000000000000

  38039

  System

  *******

  -

  30000

  Windows color system

  ----------------------------

  -

  -

  7000

  0

  2

  0

  0

  0 x 8080000000000000

  38040

  System

  *******

  -

  Windows color system

  % 1053

  ----------------------------

  What may be the cause of these event log entries?

  Hello

  Please keep us updated on the issue.

  To better understand Windows Color System, I'll refer to the article below.

  Windows color system

  I hope the information is useful. Feel free to write us if you have questions related to Windows, we will be happy to answer.

• I get this error message: Service Control Manager: The Genesys Logic USB Scanner controller NT 5.0 service failed to start due to the following error: the system cannot find the specified file.

  I get this error message (consistantly about every hour or so) and the computer crashes.  I suspect that it is looking for a file, but I can't find where the USP Scanner controller NT 5.0 would be installed.  Could it be part of the HP 6500 has Officet more pilots?  Thanks for any help!

  Hello John Wirkkala,.

  How long have you had this problem?  You still have the disk that came with your HP Officejet?  If this isn't the case, I've included the link below for the drivers and installation.  You have any other devices synchronize you with your computer via USB?

  If either reinstalling the device or updating the drivers is not a workaround, see the event viewer for the error log.  Please let us know status.

  Downloads of software & driver - HP Officejet 6500 a Plus

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=4083977#N295

  Event Viewer: how view and manage events records same observer in Windows XP
  http://support.Microsoft.com/kb/308427

• Question error message: System cannot find the file specdified.

  To switch on, I get this error message:

  system does not find the file specdified.

  To switch on, I get this error message:

  system does not find the file specdified.

  You can log in to your account admin in normal mode?
  If not,
  You can log in to your account admin in Sfae Mode?
  If so, please do a system restore. Choose the date that you did NOT have this peoblem as your restore point.

  1. how to get mode without failure:

  Shut down your computer > turn back to him and immediately and repeatedly tapping the F8 key until you see a black and white screen. The top/down arrow and select Safe Mode.

  2. how System Restore:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The NVIDIA NDIS IO Control Driver service failed to start

  NVIDIA NDIS IO Control Driver service failed to start due to the following error: the system cannot find the specified file.

  It's the correct driver.

  Ooohhh, you see in the event Log?

  I looked in the NVIDIA forums and found this:

  http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_adp.php?p_faqid=262&p_created=1117061806&p_sid=qP2bKYVi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MiwyJnBfcHJvZHM9MCZwX2NhdHM9MCZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9bmRpcw**&p_li=&p_topview=1

  I have some NVIDIA cards, but not this one, so I can't recreate and test the suggestion...

  If the RemoveNvNdis.exe does not work (I think he must disable or remove completely the service), looks like he's some NVIDIA service that tries to start when you reboot, it cannot be started for some reason any.  Looks like you don't need to start.

  If you can find it in the Services of XP, you could check the properties and set the startup type to disabled, restart and see what things look like.  (Do you know how?)

  If the mere presence of the Service in your list of Services, then you mind, you can also delete the Service entirely (I want to it later, just to be ordered if it is always hanging out).

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe"on Windows 8.1

  I've updated my OS to Windows 7 64-bit edition of Windows 8.1 pro 64-bit, and when you try to reinstall the software and the driver for my printer HP Officejet J4580 all-in-one I get all sorts of errors. It worked perfectly on Windows 7.

  I get the most common error is: System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe', as well as the facility is abandoned.

  I tried a lot of solutions from the HP Web site and these forums, but my problem is still there.

  I already tried the long solution presented here:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/install-error-quot-the-system-cannot-f...

  and

  http://support.HP.com/us-en/document/c04206080

  I even found the directory where installation has been decompressed and copied to the desktop, but the error persists.

  I need the complete software because I need to use my printer Officejet scanner, so I can't just simply print drivers.

  I need desperate help on getting this new work.

  Specifications of the computer:

  CPU: Intel Core i7 - 4820 K Quad-Core 3.70 GHz 10 MB Intel Smart Cache LGA2011

  : DDR3 memory / 1866 MHz Quad Channel 16GB (4GBx4)

  Printer: HP Officejet J4580 all-in-one; connected via USB

  OS: 8.1 Pro 64 bit Windows

  GPU: AMD Radeon R9 200 series

  I finally solved it by myself after many hours of pain.

  I clean any installation of HP from my computer using the HP Officejet software and driver removal utility:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110151-1&cc=us&DLC=en&LC=en&OS=4158&product=3645100&sw_lang=

  After the computer restarts, I moved on the desktop, the installation directory unpacked that HP printer install wizard for Windows had previously downloaded and launched.

  I deleted all files in the directory %Temp%.

  I disabled McAfee antivirus real time and Windows Deffender analysis.

  I ran the setup.exe in the installation directory in my office.

  The installation is smoothly and completed. I have already tested the printer and all features function normally.

  I hope these steps help someone with similar problems to get the software installed.

• After the installation of 6 of Lightroom, it fails to start due to the fault of libcef.dll

  Had to reinstall Windows 7 (64-bit). After the installation of 6 of Lightroom, it will fail to start due to an error in libcef.dll.  Three event log entries are created, as indicated under my signature.  Can someone help me please?

  Thank you

  Jeff

  Name of the failing application: lightroom.exe, version: 6.0.0.10, time stamp: 0x5523190c

  The failed module name: libcef.dll, version: 3.1750.1805.0, time stamp: 0x53eb9d68

  Exception code: 0xc000001d

  Offset: 0x00000000020f5fa3

  ID of the process failed: 0 x 1280

  Start time of application vulnerabilities: 0x01d0cb85de3cf6e8

  The failing application path: C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Lightroom\libcef.dll

  Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

  --------------------

  Windows cannot access the file for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the program Adobe Photoshop Lightroom because of this error.

  Program: Adobe Photoshop Lightroom

  File:

  The error value is listed in the additional data section.

  User action

  1. open the file again. This could be a temporary problem that can be corrected when the program runs again.

  2. If the file is still not accessible and

  -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.

  -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.

  3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.

  4. If the problem persists, restore the file from a backup copy.

  5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

  Additional data

  Error value: 00000000

  Disc type: 0

  --------------

  Fault of type 166477209, bucket 20

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: lightroom.exe

  P2: 6.0.0.10

  P3: 5523190c

  P4: libcef.dll

  P5: 3.1750.1805.0

  P6: 53eb9d68

  P7: c000001d

  P8: 00000000020f5fa3

  P9:

  P10:

  Attached files:

  C:\Users\Jeff\AppData\Local\Temp\WER7B95.tmp.WERInternalMetadata.XML

  These files are available here:

  C:\Users\Jeff\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lightroom.exe_29c 7eed9d3cf76b21ad83d1fc4d12620f679d41d_13bebd46

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

  State: 0

  Hi Jeffrey,.

  Please refer: " Lightroom 6 crashes when I try and open it."  Signing off CC does not help :-(

  I hope this helps.

  Concerning

  Megha Rawat

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• Error 244: The DataFinder cannot start due to an internal error.

  I have LabVIEW 2010 and, during Windows startup, this error message appears:

  "The DataFinder cannot start due to an internal error.

  (244): Please wait until the National Instruments PSP Service is running and try to start the DataFinder or restart your computer. »

  I got this pop error during the past year it's a recurring thing. He began to show a few months after installing the LabVIEW program on my computer, so I'm not sure on what caused this message still appears. I find that it causes also a delay in the start of my computer - my other startup applications starting to show only when I close the error window. Help, please! Thank you.

  Hi xcontradictorx,

  Looks like National Instruments PSP server locator cannot be started. Could go you to the control panel > administrator tools > Services and locate the server National Instruments PSP Locator? Double-click it and make sure that the service is started. If this is the case, stop and start again (just by pressing the stop and start buttons). If this is not the case, run it, and then go in the Recovery tab and choose restart the Service as long as the action of first, second and more about chess.

  If after changing the settings for the PSP the issue to continue service I think that for some reason any PSP service will just be started late for some reason any. Could you do a quick real test: disable the DataFinder in msconfig, reboot, then run the C:\Program NIUninstaller Instruments\Shared\DataFinderDesktop\bin DataFinder.exe. This should place the MyDataFinder app in your taskbar (that looks like a yellow gear).

  If this is successful, then we will have to change the order of startup services such as the DataFinder begins just after the service of the PSP.

  Try the following:

  (1) locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
  (2) remove the entry DataFinder
  (3) add a shortcut to DataFinder.exe in C:\Documents and Settings\All Users\Menu Menu\Programs\Startup
  (4) restart

  This should make all the standard Windows startup (as from services, etc.) and then launch the DataFinder.

  One question: do you use the DataFinder at all? Either with DIAdem or database search tool? If this isn't the case, you can try to remove it from the startup items. Simply go to start > run... and type "msconfig". Click the Startup tab, look for DataFinder and deselect. Click on apply. That will probably get rid of the error message.

• VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)

  Vista Ultimate - trying to COMPLETE the backup of a computer

  Hi people,

  I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

  "The file or directory is corrupted and unreadable 0 x 80070570.

  I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

  I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

  After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.