The memory resources available in the pool of resources of the parent are not enough for this operation

Similar Questions

• Why the NDP module says "you are not allowed for this operation?"

  Hello world

  I hope you can help me with this problem!

  I'm playing with the NDP module has a message saying 'you are not allowed for this operation.

  This happens when I try to create a new project and try to open the window to select a project type. It also happens when I go to the ADMIN and add new types of projects?

  Is there a role limiting me or does some other underlying problem?

  Thank you in advance.

  Hello

  I think that you might miss an active project type category.

  Go to Admin-> NDP-> categories of project types.

  You must have at least one category that is active (which is indicated by a green check mark).

  Once at least one is activated, you will need to go to the Cache and rinse the taxonomy of cache (just to be sure, I would empty Admin Data Cache Group as well).

  Then you can go to the Admin and configure your project types.

  Let me know if you have any questions,

  Dmitriy

• After installing the updates, event viewer says "Some of the updates are not applicable for this system"

  I have a laptop Toshiba Satellite L355D-57901.  I am running Windows Vista Home Premium SP2.  I have the updatedWindows updates in place so that I can revisit before installing.  After you install the updates, I noticed for some time that when I check myEvent Viewer , there are several errors indicating that "Windows Servicing identified that package (the number of update i.e. KB980436 (security update) is not applicable to this system .).   Can you please tell me why?  Thank you very much.

  Hi Simply4real,

  Check out the link below to a thread with similar problem and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c6883a0c-FF12-4bcd-86e0-4af3006eb7ce/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• my friend downloaded and installed the sp1 for vista, but since then, he gets a (error797) error message when it tries to connect to the internet, are there patches for this?, thanks

  It uses a dongle mobile broadband with 3 for the internet, it is telling him that there is no network available, have tried to delete the connection and reinstalling the software, with no results, control of Device Manager, I noticed there is a yellow triangle against the network adapter?, opened the properties for him and he said he did not work properly because the drivers were not installed, but when I tried to search for them in windows coudnt find?, any help appreciated, thanks.

  Hi thanks for the info, but he wasn't after all, network card when sp1 was installed, it has changed or blocked software for the mobile b/band, for someone who has the same problem, here is what you need to do.

  1, got to control panel,

  2, select programs and features.

  3, uninstall ALL! entries to do with the mobile b/band, even the software for the dongle itself,

  4, restart pc or laptop, plug in dongle and reinstall the software as if it were the first installation.

  This information came from an agent of technical support 3 and worked a treat, no problems,

  This procedure should work for all providers of mobile b/band

  hope this helps :))

• Dialog box appears and says that the application is not installed for this user, and rerun Setup.

  I checked the properties of Microsoft Office 7 Ultimate and it seems to me that the single play button is enabled. My permissions of the user are writing & and I'm supposed to have administrator rights.
  I don't know if I should try to reinstall or what.  I'm typing this on my XP Pro with Windows 2003 machine, which is networked with my other computer where Office 7 Ultimate does not work, even if it was this morning.  Updates from Microsoft and I was online with Office Online right before you have the problem.
  I just want to know if anyone has had this problem.
  Thank you.

  Hello

  Try a system restore:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------

  You can also check with the experts of the Office here:

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• the products are not download for me.

  Adobe products are not properly download for me.

  Help!

  Hi OriginalRokstargal

  Please refer to the document according to help on "Creative Cloud AAM lists the applications 'to date' is not installed."

  http://helpx.Adobe.com/creative-cloud/KB/AAM-lists-removed-apps-date.html

  I hope this helps.

  Please let me know if still face you the problem.

  Kind regards

  Sumit Singh

• The sliders are not preparing for the right place

  Hello

  I'm the Agilent MSO7000 series oscilloscope waveform capture. I created waveformdata for one oscilloscope channel and trying to place cursors using the node property of waveform data slider and I see that he is preparing in the wrong position, as shown in the pictures below. I would like to know what is the reason behind all this.

  You can see that the cursor is after the position where it should be.

   

  Thank you

  Kind regards

  Sailesh

  Looks like the x axis offset is not applied correctly. If you explicitly set x 0, things look better. I'll study a little more...

  Here's a quick rewrite with the same functionality, but including the x 0 problem.

• Error message - cartridge in the slot on the left is not intended for this printer

  HP Photosmart C5280 All-in-one has been arrested and brought to the college for the summer.  Now, the error message above is displayed.  The 75 cartridge is correct and a real HP that worked previously.  Removed and reinstalled the cartridge, turned off and restarted the printer, removed, cleaned and reinstalled the cartridge without success.

  What is a printer or cartridge problem?

  The only thing that worked (finally) is the semi full Reset.  Thank you!!!

• "The memory resources available in the pool of resources of the parent are insufficient for the operations." ... Really?

  Hello

  We have three virtual machines on a host computer. They need to be pinned to this host and with reserved memory: 1 GB, 4 GB, 8 GB.

  We are talking about 13 GB of RAM on a physical server that has 16 GB of physical RAM.

  When I Power On last VM, I get the following error:

  "The memory resources available in the pool of resources of the parent are not enough for the operation."

  I have a second host with the same size of memory and use reach 14GB of memory.

  I know that each virtual machine wants more memory than what we have configured, but I would like to know if it's a "bug" or

  something we can fix via vCenter configuration, or we really need more physical memory.

  Please find attached the config of memory for the virtual machine and the host State.

  Thanks in advance for your help.

  Host needs some memory as well for things like vmkernel, drivers and other components and you will not be able to touch this area with reserves of VM. It is not a bug, more like a fuse. You will not be allowed to book all of the physical RAM to VMs and / or resource pools.

  In your case, you should either decrease the reserves (why are you booking 100% memory for your virtual machines? What you're trying to achieve with this setting? Is it an obligation of the seller to App?) or increase the amount of physical RAM on the host.

  Of course this depends on your specific requirements and management policies of the resources, but in most cases I've seen, reservations are only affected when there is a heavy statement memory and using actions alone is not enough. Even so, reservations are usually configured only for very high priority / criticality VMs and not 100%, but rather a little before "stable / persistent peak memory Active" value. F.x. If a particular virtual machine has more mem use regularly on Wednesday 1-3 PM and memory active value for this period is 3 GB, a reservation is usually set to something like 4GB.

  I hope this helps.

• Why the out put of the queries are not compatible?

  Why the out put of the queries are not compatible for the same object?
  -----------------------------------------------------------------------------
  
  SQL > select table_name, blocks from user_tables where table_name = 'ENTRANTS ';
  
  TABLE_NAME BLOCKS
  ------------------------------ ----------
  ENTRANTS * 0 *.
  
  ---------------------------------------------------------------------------
  
  SQL > select count (*) in incoming.
  
  COUNT (*)
  ----------
  * 200000 *.

  Beacause after insertion of 200000 enties, table user_table not but I have statistics and statistical data not updated before you query the user_table. Use analyze, command to get new statistics for this table.

• Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot

  Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot

  The message is usually due to the Admission HA and reservations control configuration memory set on one or more virtual machines. With the default configuration HA calculates the sizes of slot based on the memory and CPU. Any reserve on a virtual machine could increase the size of the slot and lead to fewer available seats. What you can do is either to reduce (or eliminate) reservations about the VM (s) or set admission control to a percentage rather than the host failures tolerated.

  André

• Why the NFC are not available in android 4.0 update?

  Why the NFC are not available in android 4.0 update?

  Bobbles, can link you to me?

  Some galaxies (s2) have NFC chips and some not... but now they have released the galaxy S3 and who is capable of NFC

  Its really not possible to do a NFC capable of upgrading software device

  Device needs to have the NFC chip