"The missing config file corrupt" error message appears
When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!
It seems that I do not have this cd? That I should?
I don't want to just do a restore from the hard drive that I'll lose everything.
Please, I beg you!
Have you tried booting in safe mode?
If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.
Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.
I have a s173 1415. I had to format the hard drive, when I went to use the original CD that came with the laptop it said BAD MACHINE. So I installed Windows XP.
Now, I have all the necessary drivers and can not find one for the dvd/cdr drive, so sometimes the disc is recognized and sometimes it disappears.
I want to set the laptop to original state, but the CD won't let me.
What can I do?
It s very strange that this error message appeared.
Generally all compatible CD should be delivered with this laptop.
If you want you can order form taken CD supported and compatible, Toshiba service partner. It s not very expensive.
You will also find the page of all drivers on the Toshiba driver download:
Please install all drivers in the correct order. The chipset utility must be installed and the beginning.
When I go to start the flight sim (Fs9) program I get this error Message requested flight file corrupted or cannot be found.
OT: File corrupted
I suggest you try the steps from the following link:
Game hangs or quits unexpectedly
Note: Make sure that you reset the computer in normal mode once you perform the clean boot.
If the problem persists, then I suggest you to the post office.
When I click with the right button on the word file and select Convert to Adobe PDF, I get the missing "Files PDFMaker" error message
I'm using Windows Vista Home Premium, Service Pack 2, 32-bit operating system.
I'm using Microsoft Office Home and Student 2010
I have installed Adobe Reader X
Thanks Pat, this solved the mystery.
For someone else who has the same problem as me unfortunately its not good news. To use the help link in the post previous I understand now, is that my system is not compatible.
When I bought my laptop it came with acrobat 8, at a later stage, I changed the OS to be MS Office Home and Student 2010. This must have been the point that the PDF Maker has stopped working although I discovered this now.
According to the link above help Word 2010 is no longer compatible with Acrobat X and later. If the create a PDF to a word document function will never work now. Emptied!
Original title: icm32.dll error message of World of Warcraft
Error message appears when I try to connect to World of Warcraft. The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error. This pop-up has an "OK" button that you can click, but the message appears again and again. I am running Windows 7 Pro 64-bit and never had this problem before and I don't know how this file was damaged
System Type x 64-based PC
Processor Intel Core i5 - 2500K CPU @ 3.30 GHz, 3301 Mhz, 4 Lossnay, 4 logical processors
BIOS Version/Date American Megatrends Inc. 0805, 10/11/2011
What should I do to solve this problem. And any idea on what may have caused the problem.
1. What is the exact full error you get when you try to play the game?
2 have you made changes on the computer before this problem?
I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
I suggest you to check the question in the clean boot state.
NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.
I also suggest that you scan your computer with the Microsoft Safety Scanner. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.
If the problem persists, contact the game manufacturer for assistance.
Original title: Windows Rundll error on startup
My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll. The module specific cound not be found. I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.
What is a rundll error?
Why do you Rundll errors?
Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.
STEP 1: IDENTIFY
The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:
STEP 2: STOP THE PROCESS
Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
1. open your Start menu.
2. click on run
3. in the command screen type:services.msc
4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
5.stop the "dll" service immediately.
NOTE: sometimes the dll process can not be stopped by this method.
STEP 3: CHECK FOR AND REMOVE
You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN
This action will help you speed up the considerable load time of your applications. Here's how:
1. click on Start
2. click on run
3. type regedit
4. find this registry key:
HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN
5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
6. delete the value and reboot.
Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.
The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.
More information is a lot to explain and resolve the problem.
Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.
Because not only it solves problems, there will be new user settings and the program files needed for the user account.
Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.
Here is the link.
Run hitman pro 3.5
original title: require authorization of the SYSTEM
I decided to do a clean install of the latest Windows 7 RC yesterday and today crossed and have started to remove some programs on a separate hard drive so I could reinstall their own. However when I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file. I am using an administrator account, but I can't just simply delete the file. I tried going to and change the owner to my account or administrators, close it, change the security permissions to allow me to have full control, and then I can finally remove it. The problem is, I have to do for all the files one by one in the folder, and I wonder if there is an easier way to go about this, or if I can access the user of this SYSTEM and just delete them all from there. Thanks for the help.
Not trying to resurrect the old discussions, but I'll answer anyway because this thread came on top of the list of search results when I searched for "you need permission to the SYSTEM; I hope this will help everyone.
Note: here, "the record" as a subject refers to the folder that you want to remove.
Step 1: Go to the built-in Administrator account, you can do so by following these steps:
a. go to control panel > system and security > administrative tools
b. on the left panel, go to local users and groups > users. You should now see a list of users on your computer
c. right click on the administrator account that appears in the list and select Properties
d. uncheck "account is disabled" and confirm by pressing OK
Step 2: Connect to your newly activated administrator account
Step 3: Now, we start to configure the security settings that will allow you to remove this folder which was (perhaps) held by the SYSTEM:
I'm going to make the assumption that you want to remove a folder and all its subfolders along
a. right click on the folder
b. go to the security on the top tab
c. click on the Advanced button which is at the bottom
: Step 4 the first part to configure security settings to set the owner of the folder:
a. go to the owner on the top tab
b. click the button change located downstairs
c. There should be a list of accounts to choose to change the property, this is located under the label "of a change in ownership:'"
(d) the entry 'Administrator (YOURCOMPUTERNAME\Administrator)' should be there; If this isn't the case, then add it to the list:
-Click on the button "other users or groups...". "who's down
-Under the label "enter the object name to select (examples):', there should be a text field you can type into it;" type in "Administrator" (without the quotes of course)
-Click on the "Check names" button which is located on the right. 'Administrator (YOURCOMPUTERNAME\Administrator)' should now be there _For itself_; Well, if not, then you must remove the line that does not represent the administrator account that you are currently
-Confirm by pressing OK; It will now appear on the list of accounts, you can choose from
e. now, select 'Administrator (YOURCOMPUTERNAME\Administrator)' from this list
f. check 'Replace the owner of subcontainers and objects' to propagate our change
g. press OK to confirm. a message should now pop-up window, which says to re - open the properties. Do by pressing all the buttons OK see you
Step 5: now that we have the owner of the folder, we still not done. There is one crucial step left which is to remove permissions inheritable:
a. Repeat step 3 to learn to re - open properties and get to "Advanced security settings"
b. go to the permissions on the top tab
c. click on the button "Change permissions" which is down
d. at the bottom, there should be 2 check boxes:
-' Include the permissions that can be inherited from the parent to this object': deselect this. When you do so, you will get a warning on the parameters of parent is not not able to spread. Select 'Add '.
-' Replace all permissions of child object with permissions inheritable this object': check this
e. press OK to confirm. Windows will warn you this time; Click OK
f. reconfirm by pressing OK; now, you should get to properties again
Now, you shouldn't have all the warnings about the SYSTEM do give you permission as he attempted to perform actions on this issue.
All the boxes to change the permissions on the accounts (properties > Security > Edit) must now be enabled, and you can tinker around with it.
An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk" there is no disk in the drive. Please insert a disk into \Device\harddisk1\DR1.
I'm a bit confused with this error message, I don't know if there are viruses in my computer, or the reason why this error message whenever I start my computer,
Although I installed file encryption software.
This could be a virus? and how to prevent this error message appear on my computer.
Sounds like malware. Run msconfig.exe, and then selectively uncheck items under the Startup tab until you find the culprit.
There is an anoying sound when an error message appears in FF. I looked in preferences, but it doesn't seem to be an option to turn it off.
Parameters can change a few years under Ubuntu, but this gives an idea where to look.
Firefox itself has no such sound notifications.
maybe try to turn off the sound error in operating system Windows/preferences
not sure if FF has its position about the error of his
It's Linux and not Windows, but you're on the right track.
A small window with the error message appears whenever I want to open Firefox or if Firefox wants to open a window. I have to click the OK button and then open Firefox. It's embarrassing.
I have a "Site of McAfee Advisor" in my add or remove programs.
I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?
Does anyone else have this problem?
It often happens when the screen times out and goes to the lock screen, when I connect to my phone that the error message is re-appeared?
I have the same problem!
I tried to start my laptop and this error message appears:
hidden, system bios video BIOS with a shadow,
bus controllers USB PCI-card resource conflict mother Bus: 07, device: 06, 01 function
resource conflict-PCI mass storage controller on card mother Bus: 07, device: 06, 02 function
resource conflict-PCI PCI on the card mother Bus: 07, device: 06, 03 function
How can I solve this prob?
Looks a bit like a conflict of devices on the motherboard.
There is always a mentioned device: device: 06
Then perhaps, all error messages are related to the same device. I m not very well what 06 device could be, but I think that it s miniPCI device and, possibly, a wireless network card.
Try to remove the local NIC in the laptop and check again.
But before you do this, go into BIOS and set the BIOS to default settings. Save the changes and start the machine again.
Check if the message appears once more
I bought a turbo tax download and during the download of the process I ge an error message (1321) saying ' windows install has sufficient privileges to install or change the file. "
1. have you logged as administrator?
2 are you able to install other programs?
I suggest to follow the steps in the following article and check if it helps.
If you are always faced with the question, then I recommend you contact Turbo tax support for more help.
Hope this helps
How to fix error 0xC0002751When you try to download an Overdrive audio ebook, the 0cC0002751 error message appeared. How can I fix it?
Hello Ellen,.Please take a look at the following Microsoft article which seems to answer your specific question:You can also try to download and run this specific update for Windows XP that should solve the problem you are experiencing:
Hi all hope someone can help.
I have read the DVD I own on my Dell computer, never connected to the internet, no problem for 6 years. Then suddenly the following error message appears: error ID = 0xC00D1163, Condition ID = 0x00000000, saying: I need copyright permission to play DVDs I have burned or downloaded which, of course, I never did. How can I rid my computer of this obvious scam to take advantage again of my DVDs? Thank you in advance.
Make a read here: -.
Maybe you are looking for
Hello I installed a copy of Slackware 14.1 on my new Toshiba Satellite L50-B-166, but when I start it up, the wireless interface does not appear, even launching ifconfig - a. I installed the iwlwifi driver but without result.Can anyone help? Thank yo
Hi all [http://www.brightsideofnews.com/news/2009/10/19/toshiba-snafu-delays-windows-7-free-upgrade-to-december.aspx] Can someone confirm this deadline as a fact? If so, is it also for the Australia? See you soon Ben
Its possible for itself before and after without split-screen? Just pass before and after.
We are trying to export to Excel 2007 + in the last 126.96.36.199 OBIEE release. The browser just show an error: "there was an error in processing your download. Please check with your administrator". Export to PowerPoint 2007 + or the old Excel works wit