The monitor does not display the entire desktop - having to move the mouse to see the corners of the screen.

Similar Questions

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• Problems with my slower... graphic AGA and external monitor does not display

  First of all, let me say that I am not computer savy.  I just bought an Alienware 17 June 1.  Got my AGA and installed a Geoforce GTX 980 inside graphics card.  First I tried as far as I know (which is not yet much about computers) to connect an external monitor to the AGM.  For some reason that the monitor does not display anything and my laptop States there is not all the other monitors it can detect.  Now, the other problem I have is that I run games using my AGA and when its connected I can really see my games download restless and slower.  I thought that the whole purpose of the AGM was pushed my graphics and do amazing things... not very frustrating.  Any suggestions on what I might hurt?

  Try the following:

  Disconnect the graph.

  Uninstall the video card drivers.

  Install the following driver (this version is not in the official Dell support website again, however, it has been tested by our engineers)

  Restart the system and connect the graphic amplifier and test it.

  Please let me know if this helps you solve the problem.

• 20wd: monitor does not display mac

  Hello

  I have a HP 20wd screen I got a while ago because I had a chance running 10 windows desktop computer.

  Now I have a Mac Book Air 11 inch running OS X 10 update.

  The problem is that the screen displays only the windows desktop, not the Mac.

  The mac CAN recognize the screen in the settings, it also the scale of the screen on the laptop to the monitor, but does not display anything.

  The output is through the thunderbolt adapter to a VGA monitor.

  I tried to change the monitor settings, althhough, it seems there is no driver for windows 10 for the monitor.

  any ideas?

  Thanks for your help!

  I used the the DVI d input and cable on the screen, and it seems to be there normally (YAY)

• No luck with CRT/LCD button - external monitor does not display

  Hello

  I have a Dell Inspiron 700 m laptop.  When I connect to the computer to my TV (a/k/a an external monitor), hold down the "Fn" key and press F8 (the "CRT/LCD" button), my laptop screen blinks and no picture on the external monitor.  One of my friends has a Dell XPS M1210 and - through the same steps - we were able to get the same establishment to work.  Maybe someone has any suggestions for what is the problem?  Would be - it simply a matter of obsolete or incorrect drivers?  Thanks in advance for the help and suggestions.

  Kind regards

  Aranas

  P.S. to the difference of the XPS M1210, my Inspiron 700 m does not display again - when I press the key "CRT/LCD" - the box with three display options: integrated screen external monitor and both screens at the same time.  The screen just flashes to black.

  
  

• Windows xp monitor does not display the background image

  My windows xp screen does not show the background image. Started when I changed the photos there twice. Now, the background image is only 1/4 of the image on the left 1/4 of the screen. The rest is white for 3/4 on the right side.

  Other images, all jpg files, are the same.

  Hi edwardo418,

  Check that your post office is set to stretch. Perform the following steps.

  1. Right-click on an empty space on the desktop.
  2. Select Properties.
  3. Select the Desktop tab
  4. Change the setting to Stretch under Position
  5. Click on apply
  6. Click OK

  Let us know if that helps.

• Monitor does not display

  I accidentally set the moitor display at 75 Mhz on my Dell PC and all of my monitors don't work at 60 Mhz, I tried to reset the default values at startup of without success. Any ideas please?

  I accidentally set the moitor display at 75 Mhz on my Dell PC and all of my monitors don't work at 60 Mhz, I tried to reset the default values at startup of without success. Any ideas please?

  I don't know if you can reset these settings in safe mode or not. I know that safe mode does not work under these parameters but, you may be able to save the settings for a normal boot. The article on the link below, there is a way to do safe mode.

  How to start in safe mode

  http://www.mydigitallife.info/how-to-change-screen-resolution-and-display-colors-quality-in-safe-mode-of-Windows/

• My lcd monitor does not display

  My lcd monitor doesn't display, the Green flasheds light 99 - 100 times then turns orange for approximately 30 to 36 seconds then blink green. When Green flashing can turn on standby, but then only Amber can not stop amber eve

  My lcd monitor doesn't display, the Green flasheds light 99 - 100 times then turns orange for approximately 30 to 36 seconds then blink green. When Green flashing can turn on standby, but then only Amber can not stop amber eve

  Tried another monitor?

  (If not - do.  If the other monitor - a larger - hopefully works, then you know that it's a hardware problem).

• My second monitor does not display anything

  My computer worked fine and both of my monitors worked until recently when my second monitor stopped show all. My computer is always picking up as connected and on but the screen is black and no backlight, my monitor is not working is a hp w1907 and light on the upper part is the color it is on and not asleep. When I turn off my monitor and turn it back on it displays for the new school year second but then just a few no display. And before that I did my second monitor was my main monitor and it worked fine. I tried to make sure that the plugs are connected and tight and that everything was normal with the pilots and the son and everything worked. I have a Sapphire hd graphics card 7970 and plugs all work. Please help me solve this problem.

  Sincerely, McKane

  I tried the monitor in the other port and it still doesn't work so I decided that my monitor is dead and I cand do anything to fix it

  Then, almost certainly, the problem is that the monitor is dead. Especially if it used to work, it is unlikely that ther'e a driver problem.

  You might want to try the monitor to a friend's computer to verify that it is their work.

• During the insert, the program monitor does not display the adjacent images

  On page 207 of the manual, it says:

  The program monitor can help you determine where to place a clip you add to a sequence. During a change of crush it, it displays the images

  in the adjacent sequence for the new clip head and tail. During a montage of the insert, it displays the adjacent images at the insertion point.

  When I drag a clip in the project Panel in a sequence, everything works as indicated in the manual. And when I drag the same clip with the program monitor, everything works still fine - but I don't see any adjacent items displayed. How to view?

  This works when you drag the movie, not the program monitor.

• Monitor does NOT display the icons on Start Up, after the fashion 'sleep', etc.

  I recently bought my computer (last Monday) and the monitor turns on so I can see the wallpaper. However, no icons appear! If I unplug the monitor from the power supply and then plug it back it, is! the icons!

  I wanted to post here before contacting HP, because it can be a quick fix and I can't sit on the phone for who-knows-how-long.

  I have the HP p7-1234 and the monitor model number is HP2011-xi. I have Windows 7. Any help would be appreciated.

  Thank you!

  So... Guess what I learned?

  How many cables you have plugged into your monitor?  All came with a white and blue, and I connected the two.  Apparently, this causes the problem, as the two cables are designed to provide both screens.

  Disconnect the blue wire from the computer and the monitor, and then press the "Windows" key with the letter p at the same time.  Make sure 'computer only' is selected in the pop-up window, and then press ENTER.  This, according to an HP support technician, should fix the problem.

  The instructions should make that more clear that the two cables must not be connected on a single monitor, but it can also be common sense for those who have experience with two monitors.

  I've yet to leave my computer unattended to see if that solves the problem, so let's keep our fingers crossed.

• external monitor does not display full resolution-_-

  I have a 22.5 in. monitor benq screen 1920 x 1080, but my computer thinks it's a 13.9 in 800 x 600 screen.

  I can't choose a better for the display option.  No I did not choose the mirroring.

  HAAAAAAALP

  These are the windows that show for under views for sys prefs

  

  using one of these

  http://i.stack.imgur.com/zMRsU.jpg

  The dialog box display settings are two buttons: default for display and chipped. Select chipped in the external screen dialog box. This should give you the different options that are available. You can also hold down the option key while clicking on the button of the chipped to see all options, not just the most expensive.

• Tecra M5 - Second monitor does not display anything

  Hello

  I was wondering if you could help me.

  I am running windows 7 and I am trying to connect a Second display for my Tecra M5 laptop but for some reason, it detects but it won't show anything.

  What can I do?

  Can you please tell us which model of laptop do you have, what port and cable you are using and is Win7 original version of the operating system that you got with your laptop?

• Hi my website it works fine on all other browsers but on firefox it does not display correctly. I expect to send a screenshot to see if anyone had any ideas why this might occur.

  I'm almost finished my website and on all other browsers I've tried the site load properly, but some expandable boxes on my Web site do not appear on firefox.

  Anyone has any ideas on how I can fix it.
  [http://tinypic.com/r/2rwvk7n/5]
  [http://tinypic.com/r/69fbdd/5]

  It's firefox on mac.

  Upgrade your browser Firefox 8 and check

  • getfirefox.com

• Monitor does not work after windows update failed

  After the recent updates on my computer Vista installation seemed stuck to update 2. I pressed the off button and he turned his back and now my monitor does not display anything, he spends just the analog to the digital looking for a signal. I tried the computer to another monitor with different tracks and it's the same thing. Can anyone help?

  Starting in recovery system (from the Vista DVD) options and do a startup repair.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair is a recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc.

  Reference: http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  If the startup repair does not resolve the problem, try other system recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7 Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.