the most effective way to browse the MTS files

I have been using mts for about 2 years now.

When I get out of my car my camera sd I usually dump and go first.

However, it becomes quite old and it takes a hell of a lot of time to go through 5-10 this way sd cards.

Y at - it an application that I can use to view the mts files, as if it was a qt movie?

with .mov can I just plug the card into my sd drive and browse in the finder. do not have to import or open a nle.

I know that .mov is native in osx but y at - it a way to get a card that would allow my mac to treat the multilateral trading system the same?

I think you need to CS6 for her to work.

Tags: Premiere

Similar Questions

  • The most effective way to browse the similar named fields?

    Hello

    I have a 5-page document on every page that contains appx. 50 similarly named fields.    For example Viol1Num, Viol2Num, Vio3Num...  Viol50Num.

    I'm looking for an effective way to program a loop to watch each field in Javascript, I can do some manipulations in these areas on what the user has entered.

    In FormCalc, I've used the 'foreach' function similar to:

    foreach (Field1, Field2, Field3 Field50)

    "BLAH".

    ENDFOR

    However, who gets really long especially when it comes to the following pages, where I have to start adding "topmostSubform.Page2." in front of each domain name so that I can access it from the first page, all fields on the following pages.  Also, I need to do it in Javascript, no FormCalc.

    For example, in JS, I use this loop to mark all fields read-only:

    
    
    
        
    for (var nPageCount = 0; nPageCount < xfa.host.numPages; nPageCount++) {
    
    
       
    
     var oFields = xfa.layout.pageContent(nPageCount, "field");
    
    
       
    
     var nNodesLength = oFields.length;
    
    
       
    
     for (var nNodeCount = 0; nNodeCount < nNodesLength; nNodeCount++) {
    
    
       
    
    
     oFields.item(nNodeCount).access = "readOnly";
    
    
       
    
     }
    
    
       
     }
    
    
    
    

    How could I do something similar to that for I can browse each field and perform actions on it without having to list every single domain name?

    I tried to change to watch the fields instead of field properties, but I couldn't run.

    Thank you.

    I solved my problem.   It took a few fighting in javascript using xfa.resolveNode.

    I have 5 pages, each consisting of a series of 60 fields named Viol1Num, Viol2Num, Viol3Num... Viol60Num.

    If when the javascript is executed, it detects an empty field, then insert a '3' in it.

    Here it is the javascript code that runs to the second page of this document.

       While (LoopCounter< 61)="" {="">
       If ((LoopCounter! = 21) & (LoopCounter! = 22)) {}
       If ((xfa.resolveNode("topmostSubform.Page2.Viol"_+_LoopCounter_+_"Num").rawValue == null) |) ((xfa.resolveNode("topmostSubform.Page2.Viol"_+_LoopCounter_+_"Num").rawValue == "")) {
       xfa.resolveNode("topmostSubform.Page2.Viol"_+_LoopCounter_+_"Num").rawValue = 3;
       }
       }
       LoopCounter = LoopCounter + 1
       }
  • The most effective way to log data and read simultaneously (DAQmx, PDM) high data rates

    Hello
     
    I want to acquire the data of several Modules cDAQ using several chassis to
    high data rates (100 k samples per second if possible). Let's say the measurement time is 10 minutes and we got a large number of channels (40 for example). The measured data is written to a PDM file. I guess, the memory or the HARD disk speed is the limits. For the user, there must be a possibility to view the selection of channels in a graph during the measurement.

    My question: what is the best and most effective way to save and read data at the same time?

    First of all, I use an architecture of producer-consumer and I don't want to write and display the data in the same loop. I expect two possibilities:

    [1] to use the 'DAQmx configure logging.vi' with the operation 'journal and read' to write the data to a PDM file. To display the data in a second loop, I would create a DVR samples documented and 'sent' the DVR for the second loop, where the data will be displayed in a graph (data value reference). This method has the disadvantage that the data of all channels is copied into memory. Correct me if I'm wrong.

    [2] use 'DAQmx configure logging.vi', but only with the "journal" operation to write the data to a PDM file. To view the selected data, I had read a number of samples of the TDMS file in the second loop (I'm currently writing the TDMS file). In this case, I have only one copy data from the selected channels (not), but there will be more HARD drive accesses necessary.

    What is the most effective and efficient solution in this case?

    Are there ways to connect and read data with high frequencies of sampling?

    Thank you for your help.

    You say that the measurement time is 10 minutes. If you have 40 channels and you enjoy all CHs at 100 kHz, it is quite a number of values.

    In this case, I always try to approach under the conditions of use. If a measure is only 10 minutes, I just connect all PDM data and create a graphic module that could be in the same loop of consumers where connect you the data. You can always work on the raw data files big offline afterwards, the extraction of all the information you need (have a look at the product called NI DIAdem: http://www.ni.com/diadem/)

    The main issue is that the user needs to see in the graph (or perhaps a chart can be useful too). Lets say that the graph is 1024 pixels wide. It makes no sense to show multiple data to 1024 points, Yes? Every second will produce you 100 data points k per channel. What is the useful information, which should see your username? It depends on the application. In similar cases, I usually use some kind of data reduction method: I use a moving average (Point by point Mean.VI for example) with a size of the interval of 100. This way you get 100 data points of 1000 per channel every second. If you feed your graph every second with these average values, it will be able to data points in 1024 of the store (as a default) by channel (curve), which is a little more than 10 minutes, so that the user will see the entire measurement.

    So it depends on the frequency at which you send data to the consumer. For example, collect you values 1024 by iteration of the producer and send it to the consumer. Here you can make a normal means calc or a bearing (according to your needs) and he draw a graphic. This way your chart will display only the values of the last 10 seconds...

    Once I programmed some kind of module where I use a chart and not a graph, and the user can specify the interval of the absolute timestamp that is traced. If the data size is larger than the size of the chart in pixels, the module performs an average calculation in order to reduce the number of data points. Of course, if you need to see the raw data, you can specify an interval that is small. It all depends on how you program zoom functions, etc... In my case I hade a rate of 1 Hz, so I just kept all data in RAM limiting the berries to keep 24 hours of data, so that technicians could monitor the system. In your case, given the enormous amount of data, only a file read/write approach can work, if you really need access to all of the RAW data on the fly. But I hope that the values of working capital means will be enough?

  • The most effective way to retrieve a number of virtual machines in an org?

    Hi all, what is the most effective way to retrieve a MV of County in an org. I am currently recovering all CDV in an org, then all the vApps, then all of the virtual machines and pushing them into a table, then do a vms.length on the table filled by all virtual machines.

    It takes a horrible time, and there MUST be a better way.

    Open to any suggestion. Thank you

    Good, as administrator of the organization then: (I have not tried as a normal user account)

    var vdcs = new Array();
    var orgVMCount = 0;
    var vcdHost = org.getHost();
    
    var queryService = vcdHost.getQueryService();
    var expression = new VclExpression(VclQueryOrgVdcField.ORGNAME, org.name, VclExpressionType.EQUALS);
    var filter = new VclFilter(expression);
    var params = new VclQueryParams();
    params.setFilter(filter);
    
    var resultSet = queryService.queryRecords(VclQueryRecordType.ORGVDC,params);
    while (resultSet != null) {
    
        var records = resultSet.getRecords(new VclQueryResultOrgVdcRecord);
        for each (var record in records) {
            var vdcVMCount = getVdcVMCount(record.href, vcdHost);
            System.log("VDC "+record.name+" VM Count: "+vdcVMCount);
        }
        orgVMCount += vdcVMCount;
        resultSet = resultSet.getNextPage();
    }
    System.log("Total Organization VM Count: "+ orgVMCount);
    
    function getVdcVMCount(vdcHref, host){
        var vmCount = 0;
    
        var qs = host.getQueryService();
        var exp = new VclExpression(VclQueryVMField.VDC, vdcHref, VclExpressionType.EQUALS);
        var exp2 = new VclExpression(VclQueryVMField.ISVAPPTEMPLATE, false, VclExpressionType.EQUALS);
        var exps = new Array(exp,exp2);
    
        var expFilter = new VclFilter(exps,VclFilterType.AND);
        var queryParams = new VclQueryParams();
        var vmArray = new Array();
        queryParams.setFilter(expFilter);
        var rs = qs.queryRecords(VclQueryRecordType.VM,queryParams);
        while (rs != null){
            var vmRecords = rs.getRecords(new VclQueryResultVMRecord);
            vmCount += vmRecords.length;
            rs = rs.getNextPage();
        }
        return vmCount;
    }
    

    It takes a little more code because the ".ORG" field is not available for the non-Admin queryVMField, but the. VDC IS, so we start by retrieving the TDC for the Org, then for each one, ask the number of vm for VDC.

    Post edited by: Burke - had accidentally initialization of orgVMCount as new Array(); -changed second line to 'var orgVMCount = 0;

  • . No noise from the MTS files

    We use Premiere Pro to edit. MTS files.  We constantly had problems with Premiere Pro does not sound matter.  Normally, updated everything (not only Premiere Pro) will solve this.  We currently have a machine were nothing works, and from this second, we remove Premiere Pro to reinstall and try again.

    This nonsense of constantly fighting for the Premiere Pro to import sound lasts for months.  Why is it such a horrible struggle?  Is there something we can do?

    There are some good suggestions here, and I'll add a reminder for people to use the media browser to import media (as opposed to the import dialog box) with potentially dependent file like MTS formats.

    By 'folder-dependent', I mean the video may be in a directory and audio can be a file in a separate Directory. Then, if you import the video directly it can not see the audio. The media browser is smarter than the import dialog box, so he knows generally how access and import all of the media into a single import. The MTS files are not always dependent case (actually in most of my own media, they aren't) but they can be so it's good to use the media in doubt... browser and which would go to most of the other formats as well.

  • The MTS files seem to ignore executives during transitions of clip?

    My Canon Vixia HF S200 creates several sequentially numberd MTS files long sequences.

    Their slamming together in first Pro CS5 gives a "jump" between the clips, as if the images were missing.

    Now, on another forum sombody insisted that there is no frames missing in the MTS files and re-multiplexing them would prove it.  So I download 'tsMuxer' a free muxer and combined a few in a single m2ts file and in fact the 'leap' gone to the point where the previous 2 would have joined!

    Then...  Any ideas?  Some settings?  Frame rate?

    Thank you

    Dave

    Copy the whole folder in upper level of the camera on your hard drive, not just the .mts files.  Then use Premiere Pro media browser feature to import clips.  Doing it this way should solve the problem.

  • filmmaker does not recognize the MTS files

    I use Widows VIsta.
    I used the windows Director to edit MTS files and was very satisfied of this. Then it stopped working, it does not recognize the files more. As I have understood, by browsing forums, Director of windows LIVE should treat this type of video file. I've updated Windows LIVE essentials and requirements. Still not recognize the MTS file.  Can someone help me? Thank you.

    Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code. Or it can convert your video to wmv video for a test, I know that windows movie maker supports wmv video well. And this guide will show you how to convert mts video to wmv video.

  • The MTS file date display information on screen time in CC PP

    I need to display the timestamp from date of the MTS files so I can see them in PP CC15. Is it possible to get rid of it within the program? Now, I have to do it in another program and then import the file. Takes too much time this way.

    Premiere Pro does not have this feature.  The closest you can get is display the timecode for clips that have it.  If these clips were recorded using Free Run, that would give you a time, but there is no way to see the date displayed in an overlay.

  • First time. Great, but other times without sounds of the MTS files?

    Hello, I bought first Pro CC and when I used the first time with. The MTS files, all were great, but after a few days, I made another video project and my files (.) MTS) have no sound? I was searching the Internet and many people say convert), but is it really only in this way? Plese help, thank you. Jan.

    Wild guess: you forgot to patch source audio track

  • NEED HELP as soon as possible update for Premiere Pro CC 2014 and now. The MTS files are not taken into charge/no recognized

    I have Windows 8

    3.4 Ghz 8 Intel Core i7

    32 GB of Ram

    PPCC2014

    I used first Pro CC for the last year or two and. The MTS files worked very well.  Since I've updated.  Can I use is no longer. MTS files.

    notsupported.JPG

    I sync all my images using plural eyes.  I've updated the plural eyes to make it work with the update new first Pro CC 2014.

    I tried to go back to first Pro CC; However, that has been updated as well.  It does not recognize the. The MTS files, but it does not matter the new .xml successfully created from the plural eyes 3.5

    If anyone knows help or workaround so I can complete my episode of TV.  It would be great.

    Also, I would prefer not to have to transcode anything.  Hours, hours and large files don't really work.

    I also looked in repacking.  I understand that clipwrap is perfect for that. However, I have Windows not Mac.  Other options look much too involved.  I would really just my Premiere Pro to work the way it's supposed to.

    Adobe Media Encoder is wrap?

    In any case, any ideas would be useful.

    Thank you

    Try to rename the parent folder containing the MTS clips.

  • the MTS files do not work in CS6... Why not Adobe

    If I have a file in my camera sony in Prem Pro .mts, reports the video but no sound?  If I have him drop it into CS5.5 sound works.

    I downloaded an updated version of the Prem Pro from Adobe today June 2012. And still he will not address the mts files?

    I don't understand why it is so difficult to find a solution to this problem. two of the worlds biggest companies Sony and Adobe, and none of them covers the question on their site, and yet it is clearly a major problem?

    I've seen talk about on the site of renaming of files, which does not work and would be a pain in the rear.

    Does anyone have a solution that works?

    Please?

    FIXED Yipeeee!

    It is not all good news though, but I have a solution that will definitely work for you, all that it's a bit drastic

    This problem has been to kill me. I just want to be able to drag and drop the MCS file in first pro, as I always have with other video files and all the nonsense to shoot the whole folder structure just won't DO, we do not live in the 70s. And thank God, the file structure is just stuff and nonsense.

    What is happening is that... something on your PC does not work files (and Adobe do not have any idea what it is) and besides that I do, but until a person learns, I can tell you that a full blow and reload new windows will be 100% solve the problem.

    Now, I don't have one for years, so it was a complete pain and took more than a day to recover all the way I like it and to be honest, it will be a week before as I have all my favorite programs work properly.  BUT I can tell you that with Premiere Pro installed, I can now just PULL THE FILES FROM the CAMERA PHOTO HARD DRIVE and let FALL THE LIKE ANYWHERE and better yet, pull them in first ruined as I want and they play 'Sound and all' and that my friends is the way it should be

    I really hope this helps some of you, I'm glad it works now and I can get some work done, I began to hate my new camera, but now, I can tell you it's A1

    For Adobe, I can tell you that some parameters of another installed program system is clearly the culprit but I can't for the life of me tell you who.  I can say that it is not mine, or the programs fault but a lack of tests on from Adobe.  Because clearly, it is not, and a good number on your forum, and many others. Software should work under any scenario, I'm not running certainly all the strange programs that should cause this.

    Until Adobe can pin point a solution and patch their program, I can recommend my solution buy guys and girls make sure to save all your mail, Favorites, passwords, documents and any other valuable to you before doing a clean install and if you will reply in the Groove with our favorite editor PP CS6.

    TTFN

    I need to get some work done

  • playmemories ver3.0.2 House cannot see the mts files

    Playmemories home v 3.0.2 can not see the mts files. He can see all the jpg files. The MTS files can be seen in windows Explorer and also read via windows media player.

    Please check if the AVCHD format is listed as one of the supported formats of PMH. In your toolbar, go to [help] - [about PMH...] and select [Supported Formats] in the window that will appear.

    If the AVCHD format is not supported, please connect your Sony camera via USB and try to import AVCHD video. The software should recognize your camera and add support for the AVCHD format.

    If my post answered your question, please mark it as "accept as a Solution.

    http://bit.LY/LapMagWin

  • Why no sound with the mts files

    I have the Prime Minister cs6, however there is no sound when I place the MTS files.

    concerning

    Pete

    Video and audio glitches. AVCHD video

  • The most effective way to the U16-&gt; U32 Array pack for DMA data transfer?

    I have a RT controller who wants to send data to an FPGA using DMA.  In LabVIEW 8.2, I have no choice but to switch to the low blocks of data however U32 my my input data is an array of U16.  This leaves me two choices: 1) wire U16 table directly into the DMA node that will be rude to U32 but I lose 16 bit * #of table 2) Pack the U16 elements in a U32 table before sending it to the bottom.    I have #2 and I have a method that works (and seems to be quite effective) but I have the feeling that I'm doing the hard (or roundabout way).   Is their a simpler (but equally effective) way to do this procedure?  Thank you

    Here's a solution that swaps the bytes and key elements the same. There are several ways to do so.

    (for efficiency, you can place the table 'remodel' inside a case structure then, it happens only if necessary)

  • The most effective way to import data from Excel in InDesign?

    Hi all

    I'm designing for a prospectus of college which includes 400 + courses list. For the moment, these lists exist as a huge Excel sheet with fields such as course type, course code, description, etc.

    I am familiar with Excel data import in InDesign and the tables/creation of table styles and other formatting, but the problem I have is that the data are in several columns by courses in the Excel worksheet, but will be in a single column per course with several lines in the InDesign document. I can't find a way to easily convert these columns in lines.

    Someone can help me with an effective way to get the data in the page layout without laborious copying and pasting or formatting?

    Thanks in advance!

    Hello

    In excellent paste / transpose

Maybe you are looking for