The most used only a single line of site Web page because of new gear at top

I used the "Awesome" my homepage page. It was my most used sites 8 on the 2 rows of 4. After the last update, I see 4 websites because the train at the top of the page all moves down and no longer has room for 2 rows. Y at - it a setting or something I can change to get the two rows to show once again?

This page has a complicated construction, but you can use the custom style rules to change. In particular, you can leave the miniature box grow to occupy the total space available and, if necessary or desired, to have a scroll bar.

I have not worked entirely what rules of style make the most sense, and not sure I will have time during the day today.

If you are interested in a complementary solution, it was mentioned several times on the forum: https://addons.mozilla.org/firefox/addon/new-tab-tools/

Tags: Firefox App

Similar Questions

  • 2 slots for ram, or I can use only a single slot?

    Hello..

    IV ' e bought 8 GB of ram for my MBP 2012 has 4 GB of memory.

    But I totally forgot that she has 2 slots for ram!

    so you can use only a single slot? or I have to buy another ram?

    Thankss

    For best performance Mac need pairs of corresponding RAM modules, swap or buy more is recommended all things being equal. I would however expect sentencing of incompatibility performance much smaller than the benefit of the upgrade beyond 4 GB, so you could run with 8 GB in a slot and the original 2 GB in one for 10 GB total installed.

  • How to change the background color of a single line

    Hi, OTN,.

    I use JDeveloper with ADF faces 11.1.1.2 in the view layer. My question is how to change the background color of a single line in af:table?.

    Hi idir Mitra
    You can use EL to bind column for example inlineStyle (#{row.id == null?' background-color: rgb (255,214,165);':'background-color:red'})})

    Cordially Abhilash.S

  • convert the column values to a single line...

    I have to return the column values to a single line separated by commas.
    If the nulls in the column just ignore without a comma.
    Here is one for example. There are three values and two NULL values in the table
    SQL> select ID from temp_fa;
ID
-----

         1
         2

         3

         5

6 rows selected.


I am expecting an output as 1,2,3,5
    Help, please

    There is always more than one title in the Oracle world ;)
    You can use the TRIM, for example (same configuration as your example):

    hoek&XE>  create table t as select level col  from dual connect by level <= 6;

Tabel is aangemaakt.

hoek&XE> update t set col = null where col in (1,3,5);

3 rijen zijn bijgewerkt.

hoek&XE> select * from t;

       COL
----------

         2

         4

         6

6 rijen zijn geselecteerd.

hoek&XE> select ltrim(sys_connect_by_path(col, ','), ',') output
  2  from  ( select col
  3          ,      row_number() over (order by col) rn
  4          from   t
  5        )
  6  where connect_by_isleaf=1
  7  start with rn=1
  8  connect by rn = prior rn+1;

OUTPUT
-------------------------------------------------------------------------------------------------------------
2,4,6,,,

1 rij is geselecteerd.

hoek&XE> select trim ( both ',' from sys_connect_by_path(col, ',')) output
  2  from  ( select col
  3          ,      row_number() over (order by col) rn
  4          from   t
  5        )
  6  where connect_by_isleaf=1
  7  start with rn=1
  8  connect by rn = prior rn+1;

OUTPUT
-------------------------------------------------------------------------------------------------------------
2,4,6

1 rij is geselecteerd.

  • Somehow I can get the length of a segment of the timeline using only entry points and somehow like in FCP?

    Users of Adobe Premiere:

    Somehow I can get the length of a segment of the timeline using only entry points and somehow like in FCP?


    I want to get the exact length of timecode for some segments only, not the entire timeline. Can not know how to do this.

    If you set the entry points and in the program monitor, is indicated to the right:

  • How to disable automatic checking of update on the opening of Firefox? I want to disable that page "what's new".

    How can I disable this automatic update that always brings back me to the web page "what's new"? It was interesting the first time, but now it's just irritation. I can check the updates on my own, so I want to disable this feature. It just started when I upgraded to Firefox 5 upwards. I can't find a place to stop it to check and to bring me to this web page. In addition, I can't stop it archiving modules whenever I open the browser.

    Preferences are not saved

    https://support.Mozilla.com/en-us/KB/preferences%20are%20not%20saved

    Check and tell if its working.

  • icons of the screen display only a single program how to do this back to the way it was?

    need help please to complete the project.

    It is not clear what you're asking.  If you mean a given icon only points to a single program, this is the way it is supposed to work.  If you mean that all your different desktop icons are pointing to the same program, it would be a problem and the likely result of a virus, or a sort of malware.  Here are a few things to check.

    Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

    -

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    -

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    -

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    -

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    -

    Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    `

    When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

    -

    I hope this helps. Good luck.

  • The most effective way to store lines

    DB version: 10gRel2 and 11G


    If I want to keep a single column as structure, I would like to use associative arrays for performance reasons. Who is the most effective method to store a multicolumn line?


    You guys are using something like this
    DECLARE
  type v_emprec_array is table of emp%rowtype INDEX BY BINARY_INTEGER;
  v_emprec v_emprec_array;
BEGIN
  select * bulk collect into v_emprec from emp where empno=7369;
    or this
     declare
  TYPE rec_UpdateEmp IS RECORD
           (
          Inpt_emp_id         t_InptId,
          Stat_Code               gt_StatCode,
          Tms_Proc                pa_TmsProc,
          Tms_Po_Flag             pa_TmsPoFlag,
          Sngl_Unit_Flag          pa_SnglUnitFlag,
          Pkt_Profile_Id          gt_ProfileId,
          Pkt_Type                pa_PktType,
          host_inpt_id            pa_HostInptId
          );
          
      rec                         rec_UpdateEmp;
 

    Ref Cursor is a better option

    create or replace procedure emp_dtls
(
 p_sal number,
 p_result out sys_refcursor
)
as
begin
 open p_result for
  select ename,sal from emp where sal>p_sal;
end;
/

SQL> var myvar refcursor
SQL> exec emp_dtls(2000,:myvar);

PL/SQL procedure successfully completed.

SQL> print myvar

ENAME             SAL
---------- ----------
JONES            2975
BLAKE            2850
CLARK            2450
SCOTT            3000
KING             5000
FORD             3000
ADAMS            7654

  • The visible part of a SINGLE line of overprinting?

    Can someone confirm this for me:

    ONLY the visible part of an overprinted line won't be actually printed?  If the part of a line is obscured by an opaque layer ABOVE, it does NOT PRINT.

    -Jay

    You can check in the overprint preview and/or to obtain an overview of separations.

  • Join the various documents on a single line

    Hello

    How to unite into a single line a result with more than one record?

    That is to say:
    cod_prod     tax     tax_name     value
1          1     tax1          5
1          2     tax2          10
1          3     tax3          8
2          1     tax1          3
2          2     tax2          6
3          1     tax1          6
4          1     tax1          7
4          2     tax2          12
4          3     tax3          6
4          4     tax4          9
    Back to this:
    cod_prod     tax     tax_name     value     cod_prod     tax     tax_name     value          cod_prod     tax     tax_name     value     cod_prod     tax     tax_name     value
1          1     tax1          5     1          2     tax2          10          1          3     tax3          8
2          1     tax1          3     2          2     tax2          6
3          1     tax1          6
4          1     tax1          7     4          2     tax2          12          4          3     tax3          6     4          4     tax4          9
    -Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
    -OEL 2.6.32 - 100.0.19.el5

    Use 'pivot' which is available in oracle 11g

  • All the dimension values must be single line values

    I created a Simple hierarchy with the following levels:

    Category
    Subcategory
    Agenda

    The mapping of the hierarchy above is based on a table where the column list are as follows:

    ITEM_KEY
    NOM_ELEMENT
    BRAND_KEY
    BRAND_NAME
    CATEGORY_KEY
    CATEGORY_NAME
    SUBCATEGORY_KEY
    SUBCATEGORY_NAME


    Item_key is the primary key for this table and nom_element is also unique.

    When I maintain this dimension, the following error occurs:


    An error occurred on the server
    Class of error: failure of the Express
    Server error descriptions:
    INI: Error creating a generic Manager definition to < BuildProcess > TxsOqConnection::generic
    INI: XOQ-01600: OLAP DML error "all dimension values must be single line values." while executing DML 'SYS. AWXML! R11_COMPILE_ATTRIBUTES('ITEM.) DIMENSION') ', generic for TxsOqStdFormCommand::execute '.

    at oracle.olapi.data.source.DataProvider.callGeneric (unknown Source)
    at oracle.olapi.data.source.DataProvider.callGeneric (unknown Source)
    at oracle.olapi.data.source.DataProvider.executeBuild (unknown Source)
    to oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$ 1.construct (unknown Source)
    to oracle.olap.awm.ui.SwingWorker$ 2.run (unknown Source)
    at java.lang.Thread.run(Thread.java:595)

    The essential error is "all the dimension values must be unique row values", which means that the server tries to create a dimension of AW member containing a newline character. The error occurs under the SYS. AWXML! Procedure R11_COMPILE_ATTRIBUTES, which is where the attributes are indexed (i.e. transformed into dimension members). If my guess is that one of your attributes (likely mapped to a column _NAME) contains a new line.   The solution is to disable the indexing for that attribute.   In terms of AWM you must make sure the following boxes are not activated in the "Général" pane

  • Create the views level attribute columns
  • Index

  • Find the most used letter of a string

    Hi all

    I have the following code that counts every chain letter, how many times it appears:

    DECLARE
    CStr VARCHAR2 (1000): = 'Oracle Corporation. "
    NST VARCHAR2 (1000);
    Len NUMBER (10);
    c char (1);
    nCount the NUMBER;

    BEGIN

    CStr: = UPPER (cstr);
    Len: = LENGTH (cstr);

    WHILE len > 0 LOOP
    c: = SUBSTR (cstr, 1, 1);
    NST: = REPLACE (cstr, c, NULL);
    nCount: = LENGTH (cstr) - NVL (LENGTH (nstr), 0);

    IF ncount > 0 AND c <>' ' THEN
    dbms_output.put_line(c ||) e '|| nCount);
    END IF;

    Len: = LENGTH (nstr);
    CStr: = NST;

    END LOOP;

    END;


    The problem is that I want to don't show that the letter with the value the more high presence and how many times it appears and I can't sort.
    I tried to use a variable which will be set to max ncount:

    MAX_VALUE: = 0;
    Max_value IF < ncount THEN max_value: = ncount;

    but she does not return the correct data.
    Also, I want to count how many times the string "ar" appears in the string cstr and also I can not sort.

    Thanks in advance for your answer!
    Andrew.

    The most frequently occurring, chain letter 2:

    SQL>  declare
 cstr varchar2 (1000) := 'Oracle Corporation';
 nstr varchar2 (1000);
 len number (10);
 c char (2);
 len_of_c number := 2;
 ncount number := 0;
begin
 for i in 1 .. length (cstr)
 loop
  len := length (cstr) - length (replace (cstr, substr (cstr, i, len_of_c)));

  if len > ncount
  then
   ncount := len/len_of_c;
   c := substr (cstr, i, len_of_c);
  end if;
 end loop;

 dbms_output.put_line (c || ': ' || ncount);
end;
/
ra: 2
PL/SQL procedure successfully completed.
END;

    The most frequently occurring, chain 1-letter:

    SQL>  declare
 cstr varchar2 (1000) := 'Oracle Corporation';
 nstr varchar2 (1000);
 len number (10);
 c char (2);
 len_of_c number := 1;
 ncount number := 0;
begin
 for i in 1 .. length (cstr)
 loop
  len := length (cstr) - length (replace (cstr, substr (cstr, i, len_of_c)));

  if len > ncount
  then
   ncount := len/len_of_c;
   c := substr (cstr, i, len_of_c);
  end if;
 end loop;

 dbms_output.put_line (c || ': ' || ncount);
end;
/
r : 3
PL/SQL procedure successfully completed.

  • problem with the easy line of site Web

    I have a problem with a site called easy line. It's using words on my ebay page to link to advertisements.

    No idea how I can get rid of him?

    Do a check with some malware malware, analysis of programs on the Windows computer.

    You need to scan with all programs, because each program detects a different malicious program.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • Since the update to vn 7.0, my cursor is not active on the top of the page several lines of a Web page. Microsoft quotes compaibility trouble, help please

    For example, at the top of this page, the cursor is not active during the disconnection, inbox etc on the top line. Even on web pages

    The top of the Firefox window is unresponsive, inadmissible toolbars - see also the problematic extensions

  • Help the use of disc after you save a web page Web

    Hi, I almost forgot the little I have learned on the development of web pages, so, I'm a noob total when it comes to this and I need your help.

    I saved as a web page complete hard this web page on my drive, but when I open it in Firefox or IE, it does not display as much as I need. I am mainly interested in show logo images as they appear on the original web page. Browsers just show them briefly when refreshing, but immediately hide them. I can see the image files downloaded to my hard drive and if I open the page in Dreamweaver it displays these images in the preview pane, but I can't make them display in browsers. Dreamweaver, I saved the page as in the folder where the images are and this has also updated the code with relative image links, but browsers still don't show them.

    I would much appreciate your help with this.

    Nancy, I do this all the time. In this case however, the images are photos that show the larger version when the cursor is over. When I saved the page finished, I saw that large images downloaded too and hoped to replicate this behavior from the page saved on my hard drive. I thought that it was a simple matter and now I think it's not.

    The site you are trying to copy uses sophisticated client-side and server-side script.  Unfortunately for you, unless you have all the scripts that make this interactive page, you're spinning your wheels.  Your local copy cannot perform as the site online because you are lacking necessary support files (Javascript, jQuery, etc...).

    Nancy O.
    ALT-Web Design & Publishing
    Web | Graphics | Print | Media specialists
    http://ALT-Web.com/
    http://Twitter.com/ALTWEB

Maybe you are looking for