THE MOTHERBOARD CD

Hello

When I bought my desktop hp compaq computer dealer gave me my CD card mother hp, which is of great importance that I got to know now. Last when I cleaned my desk I had to re - install Windows xp, Setup was successful, but I was unable to connect to Internet.later, I called technician, he has installed Drive.Again Net if I had to re - install means I'll have to reinstall net player once again, it is possible to get or download the CD of the motherboard? Please help me

Number 6 in the list here is the network driver:

http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

Tags: HP Desktops

Similar Questions

  • Mac Book Air, failure of the motherboard

    Hi, I bought Mac Book Pro, a year and months back, yesterday, battery is down to 5%, so I continued to support, as I am studying end nyt I closed my MBA. Next day morning day when I tried to show him a folder with question mark symbol flashing. then I tried top in SafeMode it dint'showed hard drive. While I've taken at the authorized Service Center then they said his mother board failure and asked me to pay 42000INR. Is it really motherboard problem? What are the other options of best for me? and this is the price charged for the motherboard, even as they say? can I have any apple legal right againt for replacement?

    You can test it by connecting via USB, a boot disk.  If the Mac recognizes, the Mac, boots, then the internal drive or connection that is the problem.  Is it is not recognized, then it may very well be a logic card problem.

    Ciao.

  • Pavilion HPE H9-1130: install the firewire card correctly into the slot of the motherboard correctly

    Hello, for my HP Pavilion HPE H9 1130, how to install the correct firewire in the motherboard slot card OK in OS Windows 10 x 64 / x 64 processor? And what video software system can I download to recognize my Panasonic 100a camera AX?

    Thank you. Followed your instructions. And it worked perfectly. Thank you. Even if I have Adobe Prem Pro, I downloaded MS Director and put 9 drivers after installing the PCIe card. Then it worked perfectly to capture video from a FireWire camera. Thank you once again!

  • Bad video port, can I get an expansion card video or what I need to replace the motherboard?

    I have a Compaq SR2150NX, the monitor works on another PC, but will not be on this one, so I guess the video port is bad.

    Can I get a plug in video card and install it, or do I need to get the motherboard replaced?

    If I can get a video card, I can't know how to disable the frame on one, I need to disable or how I?

    My computer is a HP 5188-6734 motherboard and I can't find this one exactly, but I found a HP 5188-5588 one on e - bay for about $70, which seems to be and seems that I can tell, exactly like what I have.  Can I replace the one I have with this one without any problems?

    Looking for help.

    You are this posting in the wrong forum, this is a forum of the laptop and is a desktop system.

    Yes, you can get a video card, install and use it.  However, you sure is that the video works is not, or is it possible that the video didn't come out because you have a larger problem as the system's not initialization and display at all, because of a sort of failure such as food or the card mother?

    If you have a spare PSU, you can try exchanging it instead of the original.  If you have a spare video card, even a few old (especially some former) PCI worthless, that you can install to see if you get any screen output.  Note that you need to maybe use the CMOS clear jumper or remove the battery for 10 minutes, while the power supply is disconnected after adding a video card, or by deleting and trying to use the video again.

    I don't know if the specifications of the two Councils are quite similar, you should look at the datasheet for your system and compare that against what ebay sellers asking them is capable of.   Generally if you have a processor socket 775 lines they list and your using the same chipset, you should be able to simply plug in the parts and windows must be able to start pretty far to plug-and-play all the minor differences.  This is the situation in which I expected, you can buy the replacement cards model you mentioned and it works perfectly except possibly having to install a driver or two, but I can't be sure without detailed specifications.  They are very close to the info, I have found, might even be just a 2nd revision of the same Council of PCChips where everything what they changed was a clock IC generator or something similar that would not do your use in any way, except that to be sure, you have the good bios when looking on the HP site for the models with this Council in there instead of the bios for your system model #. If they take even a different bios which they cannot.

  • Qosmio X 870 PSPLXA 00T00E - details of the motherboard

    I have WIndows 7 Home Premium 64 bit on this computer. I have trouble finding information about the motherboard for islet need to know if she will be able to handle the SATA III or has only been designed to SATAII. Also, what is the maximum size hard drive, this machine can handle?

    Thanks in advance for help :-)

    Hello, not long ago I bought an SSD for my qosmio X 870, AFAIK could manage only SATAII, but since most hard drives are SATAll / lll compatible, you need to check on this, "so-called" lll SATA retro-compatibility, I bought a Samsung Evo 850 with 500 GB and it works perfectly!
    In regards to the maximum, that I don't know, but at least 1 TB as the original drive.
    See you soon!

  • Satalite Pro C650-18 t - how to access the motherboard?

    Hey,.

    I was pulling on my hair for the last 3 hours trying to find a way to get to the motherboard. I removed all good there, and still nothing. It doesn't seem to be a way to remove the bottom to access the motherboard.

    Can anyone help? Please?

    Hello

    Why you do this?
    I mean that the C650 is not an old book.
    The guarantee was valid and now the warranty is valid more because you have disassembled the unit

    Sorry mate I put t know how help you I want to say that there are a lot of screws and it is important to remove all the pieces in the right order
    I don't think that this is possible without having to disassemble everything manuals or instructions.

    I think that you should visit a laptop technician for assistance

  • A1410n on the motherboard heat sensors

    I have a pavillion a1410n that heat on the mother sensors on board who were not properly welded.  I looked on the HP website and can not find a local partner of HP who can fix the welds.  HP wants me to spend more than 300 for the computer shipped to them to repair or replace.  Is there another alternative?  I am on a fixed income and really can't afford that much $$, but need to use my computer.

    I guess he is not a technician in electronics. I suspect that your system is no longer under warranty. It was a defect of manufacturing of the motherboard.

    Why not buy a new replacement motherboard. They are not very expensive. Just don't buy it at HP... too much. The link will take you to one that sells for $59. Do a Google search for the card mother a1410n and you will find more. Once you have a replacement motherboard, you can bring to your independent technician and hire to remove the old and put in the new mobo. Then, your problem is solved. Since the new mobo is exactly the same as your old it is simply a matter of plug all components (including the HARD disk) and get to the top. Are no required reinstallation of the operating system that the HAL is the same.

    Published by erico on 02/02/2009 05:07

  • Want to 800-060: reactivation after replacing the motherboard

    I bought a HP Envy 800-060 with Windows 8 pre - install Amazon in July of 2013. It was an incredible computer since that time, and when the free update of Windows 8 for Windows 10, I did immediately released. Recently, however, the motherboard has failed on the computer. It would not stay same POSITION, and after much troubleshooting, I finally decided to replace the motherboard. Now that the computer is running again, I guess that the motherboard change was sufficient for the operating system to think that it is no longer enabled. I was never provided with a key of Activation of OS (Win8 has been pre-installed), and Microsoft has suggested that I contact HP to find the original key. I've looked everywhere on the chassis and inside the tower for a valid Windows activation key, nothing helps. I tried to find a phone number to call for support, but my product is outside the guarantee. I don't need advice or troubleshooting tips (so I don't pay the $59.99), all I need is my activation key valid Windows based on my serial number of the product. Anyone know the best way to achieve HP with this problem and have it is resolved?

    Thanks in advance!

    JC

    jcontino889

    The unfortunate, is that your original product key has been incorporated in the firmware original by HP motherboard UEFI when the PC was built.  There is no way to recover this key now.

    HP retains no record of keys to individualized product corresponding to individual computers, so they won't be able to provide you with the original key - and they are under no obligation to provide you with a SECOND key, that you didn't do the replacement of HP hardware.

    With the product now being out of warranty, it's really call HP or not you upload support - and the experience I have had with older equipment-, they do that, there's just no way around IDs.

    HP customer support is really the only way you have to get support.  If they don't help you for free, because your PC is out of warranty, there is nothing we can do about it on this forum.

  • Replacing the motherboard on the Satellite L750 - 16 X

    Hello

    I am trying to replace the motherboard on a L750-16 X. I think that I need this A000080670 card, which is available. Under the RAM slots the sticker says A0000806709B141422W. I'm not sure of what the average figures and additional letters and I was wondering if anyone knew if it is compatible.

    Thank you very much

    Unfortunately, it is not easy to help you with this. As you probably know it's user forum for this kind of info is not easy to find.
    I don't know where you want to get the new motherboard, but if you want to buy it by some authorized service they should now what they offer.

    I don't know if anyone here has the same machine and can help you with this. What you can try is to contact the nearest Toshiba service provider in your country and ask for help.

  • When Toshiba will replace Z930-Portege, after 3 replacements of the motherboard?

    I bought my Portege Z930 in Dubai this year and she has had 3 replacement of the motherboard. Apparently the configuration has a problem, at least for the models of Dubai (see forum related post: motherboard for Portege Z930 B113 need send to the Brazil, posted: January 29, 2014 11:40)

    In Europe, they advised that Toshiba should replace, but in Dubai's local service provider advises another motherboard replacement!

    How can I do to request Toshiba to provide me with a slight i7 8 GB RAM 256SSD equivalent model, because living in the same configuration does not work (it takes only a week and a month for the motherboard down).

    Please advise,
    Thank you

    It s doesn't know only not for me that an entire book could be replaced by Toshiba in case of hardware problems.

    Usually in case of hardware problems, the authorized service provider should be able to solve hardware problems, replacement of the defective part.

  • Satellite A305D-SP6905 - change the motherboard

    Hello

    I have a Toshiba Satellite A305D SP6905 with and AMD Turion 64 x 2. It happens that the motherboard had a short circuit and it broke. I live in Uruguay and it s hard to find a replacement. But I find a motherboard Intel for the same model and also can find a processor.

    I want to know if this motherboard is for you my current A305D with currently has a model AMD motherboard (which is supposed to be replaced).

    The look I m of the Intel motherboard is V000125150.
    The AMD motherboard I have is V000126040

    If someone has the good idea of I´d enjoy.

    Select this option.

    Hey,.

    I think that you need an exact answer people professional if it is possible or not. I mean, probably you need a cooling fan, AC adapter, etc. I put t know the exact specifications.

    I recommend you contact an ASP in your country. Guys have access to databases of Toshiba so they can you give an exact answer if that's possible or not. On the Web from Toshiba site, you can find a list of aspic, how to contact guys.

    In General, it would be easier if you buy the motherboard even once again. Have you checked second hand places like eBay?
    Or ask the local ASP why not? ;)

  • Satellite C50A-1JT - need info from the motherboard to the CPU compatibility

    Hello.

    Where can I find the specyfication of the motherboard?

    I'm looking for information that processors can work on this chipset.

    Best regards
    Alright

    Hello

    To my knowledge, the laptop was equipped with Chipset Mobile Intel HM70 Express.

    More in detail which processors are supported by the chipset on the Intel ARK page
    http://Ark.Intel.com/products/67419

    But even if the chipset would support another CPU, BIOS cannot provide such support.

  • HP s5503w, Windows 7 ultimate 64-bit. Want to connect a player card on the motherboard.

    New to the Forum and looked but cannot find an answer to my question.

    I have a desktop HP SlimLine s5503w; what I need an answer, that's where on the motherboard I plug the card reader I have. Searched both here and on the web with no luck. A friend gave me a card reader and thought it would be good to use on the 5503. Anyone with an answer? Thanks in advance for your help.

    Roger

    Here are the specifications of your desktop HP Pavilion Slimline s5503w and its card mother M2N68-(Narra5). Based on the specifications, the motherboard has four headers USB as shown below;

    As long as the eMachines card reader is USB based, and uses the same pinout as the card mother HP, connect the drive to one of the 5-pin headers should work. Make sure that the four pins that have sons, go on the 4 pins on the motherboard... with the 'empty' PIN to the empty space.

    Also note that there is nowhere to get this card reader into your computer.

    Please click the White Star of KUDOS to show your appreciation

  • Re: Satellite Pro A300 - program to test the motherboard and memory

    Hi all

    Could you please suggest a program to test the card mother of my laptop Satellite Pro A300 and problems of RAM on reliability and compatibility.

    Thank you.

    Hey Buddy,

    There is no software tool to test the motherboard. This is possible with special Diagnostics of an authorized service provider.

    But for RAM, there are several that Memtest86 diagnostic tools. It s based BACK of diagnostic tools that checks all areas of memory with different methods. Freeware tool is really nice that you can download here:
    http://www.Memtest86.com/

  • Is it possible to upgrade the motherboard on NB550D

    Hello

    I have the NB550D with the C60 dual CPU

    I upgraded to Windows 7 Professional - 64-bit and improved the RAM to 4 GB

    Now it runs like a dream - a true small draft horse and play a lot of the high technical games.

    Is it possible to upgrade the motherboard to increase the CPU?

    Hello!

    No, it is not possible to upgrade the motherboard.
    All motherboards laptops are designed0 for the single computer series portable and you can only use a motherboard that was created for the series NB550D

  • Can satellite M70-159 - I replace the motherboard with another?

    Hello!
    The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?

    Thank you.

    I put t know if it s possible because I m not a technician for laptop.
    Normally, you should only replace the motherboard with the same.

    I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.

Maybe you are looking for