the mouse cursor moves constantly

It is difficult to open anything or move to any particular item because the cursor moves constantly on it.   PLEASE NOTE: Although my address on Live ID is , I need to be contacted at .   I have to find a way to change my address with Live ID.

Lynda

Hi Lynda,

1. you are using a laptop or desktop?

2. what kind of mouse you are using? What is a wired or wireless mouse?

3. did you of recent changes to the computer?

If you use a laptop, try to reduce the sensitivity of the Touchpad and check

Change the settings of the mouse

If you are using a desktop computer, you can try to reduce the hardware acceleration and check.

a. click the Start button, Control Panel.

b. now, select appearance and personalization. under display, select adjust screen resolution.

c. now, select adjust the resolution.

d. click Advanced settings.

e. now, click the Troubleshooting tab, and select the change settings button.

f. in the Security dialog box, click on continue.

g. move the hardware acceleration slider to the third notch.

h. click OK and restart Windows.

Hope this information is useful.

Tags: Windows

Similar Questions

  • The mouse cursor moves on slow monition Dynadock U-related

    Hello

    I'll just borrow the subject to ask a question or an opinion on dynadock U.
    I have tecra S10 set to date, with win 7 32 bit Enterprise connected through dynadock you for external monitor AOC. Problem that I face is that my mouse (cursor) moves like on slow monition. At some delays just work with office (outlook or word), or surf the net - Explorer.
    As I said the two computer and dynadock are updated with the latest drivers.
    On dynadock are connected: two printers, keyboard, mouse, external HD and speakers.

    No idea how to fix?

    THX,
    marjaN

    Hello

    The same also occurs if the mouse is connoted to s for computer laptop USB port directly?

    Please check

  • Portege Z series - the mouse cursor moves its own

    When I start my series Portege Z the cursor of the mouse moves by its own. Alfer several minutes (less than an hour) it stops and it works properly.
    For your information on the laptop, the Antivirus is installed and updated: AVIRA and Spybot

    What I tried to solve the problem:
    (1) I downloaded and installed the latest version of the pointer ALPS driver device that even so the same version was already installed. No result, same behavior
    (2) I tried with an external USB mouse, disable touchpad/pointing stick. No result, same behavior

    Suggestions, please?
    Thanks in advance

    Maybe you can try to start with a Live CD/USB. If this problem occurs also with the OS Live the question is related to laptop. If not, it s a Windows problem and perhaps a recovery would solve the problem.

  • The mouse cursor moves randomly while typing.

    Hi guys, I was typing in mandarin especially when I use windows live messenger and have no problems with him. Lately about 2 days back, this problem started.  The problem that I am facing is that at random times when I place my mouse to a position where I want to type something, in the races of cursor. By example, if I want to type something in one of my windows live contacts messenger chat box, the cursor blinking indicating the type runs. Then a little box will appear on any where right above the task bar and I start typing in this little box. Next to the box, there will be an arrow which I can click and he said: "complete the chain. I suspect that this must be my language setting I messed up with and have no idea how do to reverse the trend back to normal. Someone has an idea how to fix it?

    Thank you. Any help will be much appreciated.

    The link below shows the small box that appears just above the taskbar

    http://s.LowYat.NET/uploads//attach-34/post-130934-1290331496.jpg

    Hello

    If it is a laptop, please set the sensitivity of the mouse.  This could be the cause of this problem.  In addition, I would consider doing a restore of the system at a time and one hour before this problem occurring.

    -Create an another user account and check if you still experience this issue.

    -Test in Safe Mode

    -SFC / Scannow

    I hope that this information is beneficial.

    Thank you

    Aaron
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • The mouse cursor moves automatically

    Today, I installed the patches to update for the affected Windows 7 Pro 64-bit machine.  Shortly after, I installed the printer driver for an HP laser printer. To the arrival of this, the cursor started jumping around on the screen and click right windows to open randomly place.  It was impossible to do anything with the mouse, because the jump was so rapid.  I tried another mouse, but the fault remained, and he was always there, even if there is no mouse.  I had to use the power button to turn off the machine.  Then I restarted in safe mode, and stopped jumping.  I drove back to three different, although restore points before sentencing, but as soon as I restarted in normal mode, the jump began.  I did a selective startup with msconfig, but the problem was still there. I did a check for complete virus with the CEP. Then I stopped for the day.  Tomorrow I intend to start by booting from a repair disk, and if that doesn't work I don't know what to do next.  Do you have any suggestions?

    Original title: jumping cursor in Windows 7, desktop computer

    Hello Mary,.

    Welcome to the Microsoft Community Forum.

    Let me ask you,

    1. Do you have update installed?
    2. What is the brand and model of the mouse?

    Please try the following suggestion and check.

    Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    See the link to perform the clean boot.

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135/en-us

    Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

    After back if still the problem persists. We will be happy to help you further.

    Thank you

  • The mouse cursor moves to the middle of the screen

    Original title: Windows 8, teleported slider on the sides of the screen.

    Yesterday, I got a new Lenovo Thinkpad notebook, and it runs Windows 8.

    I didn't do anything with the laptop yet, but whenever my cursor reaches any side of the screen, the cursor of teleports in the middle of the screen. It is extremely annoying and makes it almost impossible to close applications. I asked around, and this is not expected behavior.
    Is there any solution for this?

    Hi Jargonian,

    Go Control Panel, programs and features, and see if the Lenovo AutoScroll feature is installed.  It's a Lenovo quietly installed tool that enables this behavior.  Uninstall the program.
    You can reinstall it later if you miss the feature by running the shortcut key configuration.
    I have a Lenovo Thinkpad S230U twist and remove the program fixed the inconvenience as well as other issues of frustrating navigation in both IE and Chrome.
    I hope this helps!
  • The mouse cursor disappears when iTunes movie go full screen

    This isn't a question... actually I found a hack solution to this bug and I wanted to share it with other people having the same problem.

    Since the upgrade of the OS X El Capitan, I'm having a problem with my cursor disappears randomly. It is very repetitive if I start a video in iTunes with the enlarged screen and the cursor disappears. Indeed, after entering mode full-screen, iTunes mask the cursor of the mouse that is predictable. The problem is that iTunes may not reappear there again once, for example, when I go to another office for a temporary job.

    Move the mouse does nothing, escaping mode full screen does not come back. It is very annoying. Like I had never had such a frustrating experience prior to a new installation of El Capitan 10.11.3 and update iTunes to 12.3.3, I thought that this is due to the update to iTunes. So, I made another new facility of El Capitan, this time without updating iTunes. But the problem still exists. It is interesting that I had this problem on my MacBook Pro 17 "end 2011 and not with my iMac 21.5" mid-2009!

    After a little research, I found that this bug is not because of El Capitan, and happened randomly in the other years dating back to Tiger and maybe before.

    Only new change I had made in my MBP Preferences system , was in the part of accessibility, and it was related to Zoom. I had always used this feature, but I put the Zoom Style 'full-screen'. This time (after the new installation of El Capitan), I had changed to 'Picture-in-Picture'.

    I changed the Style of zoom "full screen" even once, and the problem resolved.

    If this does not work for you, can be debilitating, other options, such as 'Use keyboard shortcuts to zoom' or 'Use of scrolling with keys of change to zoom movements,' can solve the problem.

    We all know that it is a bug, and he has been there for a long time. I found that many people had reported it to Apple, but the problem persists.

    For those of you who want to use the zoom "Picture-in-Picture" style, or set the zoom style full screen does not solve the problem of their mouse disappears, I will mention a few ways to recover the mouse cursor. The following solutions are applied to a mouse cursor disappeared after entering the movie to iTunes (or any other application) full screen.

    1. Move the mouse until the switching Office brings back the cursor. Now, you can switch the desktop computer and do whatever you want. (It's easier work, at least for me).
    2. Use Alt - Tab to switch to another program; This will bring the mouse cursor.
    3. Press Ctrl + F2 to activate the Apple menu. (You can also move your cursor away to top left and click to activate the menu.)
    4. Press Ctrl + up arrow (or swipe up with 4 fingers on the touchpad) to activate the control of the Mission.

    You can also find other ways to retrieve the cursor of your mouse.

    Hope this can help you with the mouse pointer disappears.

    In MBP El Capitan the pointer of the mouse is where you assign to ' picture in picture ' or 'full screen '.

    If you miss your mouse pointer, accessibility-> display "Shake mouse to locate" check to find your mouse pointer. It should be there.

    Note: you have posted in the discussion of the Mavericks, should have used the ElCapitan discussion...

  • do not move the mouse cursor

    Hi all. today I did something really stupid. I was in a chatroom without supervision earlier and another person and I'm in it and I could tell definently I makes him angry. I left the chat room and 15 minutes later im on another site and the cursor of the mouse is suddenly freezes and does not scroll on the page. everything else seems to work very well. so I restarted the computer, the mouse works when the windows password page appears, so I type the password and then loading this page and the home page comes (one with all programs, etc.) and appears as soon as that is when the mouse cursor freezes and not scroll or move. everything else continues to load and seems to work very well. If I restart the computer and put it in safe mode and the mouse works moves very well and everything. Anyway, the bottom line is I think the other person sent me a virus or something that is used to pass my cursor in normal mode. What should I do? also, I can't get the sound to work on my computer in safe mode. says low right volume icon ' audio service does not "and I want it running in safe mode, until I can get this cursor problem is resolved. any help is greatly appreciated and please explain in terms laymans, because I don't know anything about computers. Thank you very much for your time and have a great day.

    Hi crazyforfrance,
     
    As the mouse works properly in safe mode I suggest you try troubleshooting this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.
     
    A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:
     
    Clean clean boot.
     
    a. Click Start, type msconfig in the search box and press ENTER.
    The user account control permission.
    If you are prompted for an administrator password or confirmation, type
    password, or click on continue.
    b. on the general tab, click Selective startup.
    c. under Selective startup, click to clear the load startup items.
    d. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
    e. click OK.
    f. When you are prompted, click on restart.
    g. after the computer starts, check if the problem is resolved.
     
    If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
    http://support.Microsoft.com/kb/929135
     
    Reset the computer to start as usual.

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    Click Start, type msconfig.exe in the start search box and press ENTER.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
    When you are prompted to restart the computer, click on restart.
     
    Note: In safe mode you may not be able to hear the sound because the sound drivers and other drivers may not load and only essential drivers can handle, which are very important to run an operating system. and it's a way of diagonistic.

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Turn the mouse cursor

    This only happens when I visit Facebook, but the mouse cursor turns and will not stop. Firefox will never block or unresponsive, but it behaves as if there is always from my PC 'think '. Any ideas on how to stop my cursor to turn constantly?


  • The mouse cursor changes to hand instead of the text tool when I hover over the text.

    Normally whenever I have fly over the text in an e-mail or on the web, in order to highlight to copy and paste, the mouse cursor becomes a text tool.  However, now every time I have fly over the text, it remains on the hand tool.  Whenever I click on the mouse button, there just cause the hand to shake.  I can then move the page and everything I want to get off.  The only problem is, I want to highlight the text with the text tool, not handle the page with the hand.  My question is how to change the mouse cursor to get the text tool when it flies over text?

    Normally whenever I have fly over the text in an e-mail or on the web, in order to highlight to copy and paste, the mouse cursor becomes a text tool.  However, now every time I have fly over the text, it remains on the hand tool.  Whenever I click on the mouse button, there just cause the hand to shake.  I can then move the page and everything I want to get off.  The only problem is, I want to highlight the text with the text tool, not handle the page with the hand.  My question is how to change the mouse cursor to get the text tool when it flies over text?

    I wonder if this will help...
    Right-click on an open office space > Personalize > mouse pointers > pointers tab, click on use default > apply/OK

    t-4-2

  • The mouse cursor does not appear on the center of the screen to start upward.

    The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

    The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

    Suggestions:

    Go to Safe Mode:

    Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. Use the up/down arrow and selectSafe Mode with command prompt.

    1. in safe mode, please do a system restore. Choose the date where you did not have this problem as your restore point.
    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done.

    2. always in safe mode, do a check of the file system. See if file check will check for corrupted files and repair them.

    Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
    Note: there is a space between 'sfc' and ' / '.
    To sit and wait. It will take time.
    When finished, exit the cmd window.
    Reboot (restart your computer)

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Is there a "shortcut" that will bring the mouse cursor to a position of 'home' on the screen

    We currently use Windows 7 and extended desktop in a dental practice that allows us to show images on another screen.  Often you "lose" the cursor on the screen when it is accidentally pushed above the extended desktop.   Y at - it a function that allows you to designate a «shortcut"that when pushed, will automatically return the cursor «before and at the centre"in the main screen?»   We already use it the function of 'location circles', but this is not enough in this situation.

    Thanks for your help, everyone.

    You can of course.  I adapted the instructions below on the following page:

    http://flamingkeys.com/2011/03/moving-the-mouse-cursor-with-Windows-PowerShell/

    And it works well.  Here's how.

    1. Open Notepad and paste these 3 lines.

      Add-Type - AssemblyName System.Windows.Forms
      $screen = [System.Windows.Forms.SystemInformation]: VirtualScreen
      [Windows.Forms.Cursor]: Position = '10', 10

    2. Save the file with a .ps1 name (it is a number at the end, not an I or L), taking care in the box save to select "all files (*.)" *)"in the menu file type to the bottom when you save it.  Example:

      You can save this file anywhere you like. I recommend your C:\ drive or something, because this is not the file that someone will actually use directly.  You must create a shortcut instead.  I'll assume that you have saved under C:\MoveMouse.ps1 for the rest of this post.

    3. On your desktop, do a right click and make a new > shortcut.  As the location of your shortcut item, use the following:

      PowerShell.exe c:\MoveMouse.ps1

    4. Right click on your newly created shortcut and go to properties and assign a keyboard shortcut.  I used Ctrl + Shift + M to mouse.

    That's all.  Now, whenever you press Ctrl + Shift + M, this script batch file executes and move your mouse to the location 10.10 on the screen (just inside the upper-left corner of the screen).

    Take advantage of :)

  • When my Mac restarted the mouse arrow moves in order to type the password

    When my Mac restarted the mouse arrow moves so I can type my password

    I guess the mouse battery is fully charged and that the mouse work? You can see if the mouse is paired with your mac?

    You can also use the arrow keys + return to select a user to connect.

  • The mouse cursor disappears on the address and search bars.

    In Firefox 10, the mouse cursor disappears from the address bar or the search bar after a certain time, or I guess that after visiting a site that I paste below. I don't see what part of the word I click on the address bar or the search bar for the correction because there is no mouse cursor. After clicking on tools and options cancel, the mouse cursor appears (I make no changes to the options) or when I click on customize in the navigation bar, then the icons I click on Cancel again without modification, and the mouse cursor appears again (as you can understand some trigger for windows option implementation even without change is done). I uninstalled firefox 10 just for this reason. Back to Firefox 9. Safe mode - same problem happens. So no problem addon. And the same thing happened in another operating system, so this isn't a fault of a facility.

    Problem solved for me in the last version of firefox v.10.0.1

  • Bookmark shortcut does not work if the mouse cursor is focused in the version of the flash plugin.

    I tried to open the bookmark panel shortcut [ctrl + shift + B] buttons when the mouse cursor is focused with the flash plugin. But it does not open. But I clicked on the page and he's trying again, he opens the bookmark panel.
    Try the following link
    [Example: https://learnable.com/courses/a-crash-course-in-mobile-web-design-195]

    This may or may not be a problem.
    It's just a suggestion...

    This is a limitation of the works in Firefox.

    If a plugin is developed, which makes this shortcut key is no longer so he treats all keys work.

    You have to click outside the plugin, if you need to use a keyboard shortcut.

Maybe you are looking for

  • Digital text

    I noticed that whenever I send a digital text to a friend, I also get the same text myself on my phone. Is there anyway to do that to happen stop?

  • How can I get Thunderbird to work with 2-step Google verification?

    I tried for a while to use passwords with Thunderbird specific app, however it seems to work temporarily and then request a new password. It becomes frustrating. All the more that I love using Thunderbird on my PC... but I can't deal with these error

  • Updates configuration Windows 0% complete at the start of Windows 7.

    Original title: WINDOWS 7 UPDATES do NOT DO. 1.I swich pc suite and... "Configuring updates of Windows 0% complete - no not tun OFF... takes 5 minutes each time then..." 2. the... returning default configuration changes... 3. When you turn off... "if

  • my computer has the power, but it does not start.

    my computer has the power, but it does not start. crancking for several minutes, after that it will quickly be able to record and then it starts again. Also, he asked once to restore to an earlier date that I did. He worked for a night, but come back

  • U2414H, Mac Book Pro, DisplayPort 1.2 empty, solved

    I'm posting here in the hope that it gets indexed by search engines and other people can find the answer that I spent a few hours searching without luck.  At first, I must say that I am generally very pleased with this monitor - like bezel-thin, very