The mouse does not work on a few screens in windows 7

Similar Questions

• The mouse does not work in the drop-down list windows

  I can click on the menus in the command line with my mouse, but once the new window opens, I use my tab, arrows and enter to navigate within this window key.  The mouse does not work.

  I am on Windows 7 and work, of course, in the Cloud of the IND version.

  Thanks for the help.

  See the signs and tools InDesign respond not to the clicks of the mouse (Windows 7/Vista)

• Satellite C660 - click of the mouse does not work

  Hello

  I bought this laptop 5 weeks ago and now have problems with the right, click on the mouse does not work. Left click sometimes opens to the left, click on functions and leaves me is impossible to close programs or closed, double clicking in the pavement or enter does not work also.

  I tried to do a system restore to the factory, but I can not click on the next to take me through the restoration and end up having to close it via the main power switch.

  Any ideas please?

  Hello

  You have the same problems with a mouse external or just the touchpad?

  If an external mouse works correctly, you can use it to do a recovery install. This can help you to solve the problem, if this just s software.

  Not least have last but you tried to update the driver for the touchpad? You can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• The mouse does not work on my new Satellite L750/L755

  Hello world

  I bought a toshiba Satellite L750/L755 but the mouse does not work, I have no control on it that if I use an external mouse, while I have put pressure on the touchpad.
  I tried the following options:
  I updated the driver - I changed the operating system

  but nothing, still the same problem. Next laptop will be a Mac for sure.

  I look forward to hear from you

  Daniele

  Hello Daniele

  It's really strange that the touchpad does not work even if you have installed the right driver and installed the operating system again. At the first moment, we can say there is probably a hardware problem, but please be sure touchpad is listed in the Device Manager and also active correctly (FN keys).

  Check it please all the properties of the mouse.

• How to join start in safe mode when the mouse does not work?

  (I'm on another computer to ask this question). I'm in safe mode; mouse does not work; arrow keys work but don't go to 'start '. How to get started?

  Assuming you have the office showing with all applications minimized or closed, Tab or F6 should pass the Start button and a few other "elements" on the taskbar.  Look closely and you will see a light preview highlighting of the selected item.  Press the Enter key to activate it.

  In XP Safe Mode, the cycle is start button > Quick Launch toolbar > [of any application taskbar icon] > clock > desktop icons.  While the Quick Launch toolbar is highlighted, the arrows move among the icons in the QL toolbar.  While the desktop icon is highlighted, the arrow keys will be touring all the desktop icons.

  Have a look here--> http://support.microsoft.com/kb/301583

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• Click on the mouse does not work

  I'm on an iMac ca 2008 and the mouse cursor moves on the screen, but clicking on does not work. No action in any application. Will not open files, no command is executed. Initially, it was casual, but happened to be the worst, now it is complete, start at the stop. At the start (in El Capitan), the mouse moves the cursor, but there is no answer to the click. I went through the first aid standard attempts-trash finder prefs, reset the NVRAM, reset the SMC - no change.  Elsewhere in the forums, the problem is attributed to the El Capitan, or if no GPU. BIOS problem? It seems to be a hardware problem, but I'm no judge of that. Any suggestions?

  You probably need a new mouse.

• the mouse does not work after a beep

  I currently have Windows 7 installed on my desktop at home.
  Lately I had problems with the mouse. When I start windows, it seems to work very well. After a few minutes, I hear a strange beep & the mouse no longer works in total. I tried to disconnect & reconnected again to see if there is no dust collected but that doesn't seem to work. I checked if the drivers are updated, I saw that the latest version of the driver has been installed. I checked if there is a problem with the ports. I started in safe mode. Uninstalled ports & restarted my computer. For worms, it seems to work fine, but now it seems I have the same problem again. For this reason, it is necessary to reboot the machine again & again once because the mouse freezes & I'm stuck here.

  Help, please

  Hello

  ·         The mouse works fine with other computers?

  ·         Did you make any changes before the show?

  ·         How is it connected to the computer (wired or wireless)?

  ·         What is the number and model of the mouse?

  Method 1:

  If it is connected by USB, I suggest you try to login via the different USB port and check if the problem persists.

  You can also run the hardware and devices Troubleshooter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I also suggest you to start in safe mode and check if the mouse is working properly. To start in safe mode follow the below link;

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3:

  If in safe mode mouse works fine, I also suggest you to place the computer in a clean boot and make sure that the third party software that is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: Make sure that when you have completed troubleshooting set the computer to a normal startup by following step 7 from the link above.

• Left click of the mouse does not work

  I recently got a "microsoft wireless mobile mouse 3500. For some reason any the left click will not work and won't be the Center wheel. The right click works perfectly well. I havnt done anything to harm the device. I checked the manual to see if something could help me here. I also looked on the websites and checked if others had the same problems. I couldn't find anything that could fix. Could someone help me please?

  You have installed the latest Web site driver below:

  http://www.Microsoft.com/hardware/en-AU/p/wireless-mobile-mouse-3500#support

  If SO and it still does not work, as it is again return to place of purchase and replace.

• The mouse does not work when coming out of sleep mode

  I move the mouse to the computer of the mode "Eve".  Our journal 3 on tiles appear.  My husband,. admin Acct and finally my user account.  Admin account and my acct have the same privileges.  In any case... The mouse will not move the cursor at all once the computer wakes up from sleep mode.  My husband tile is highlighted and so I either hit tab again so he can highlight other options that I can hit enter too and I hope that the mouse starts to move the cursor.  It won't let me spend the good user.  If I type his password on his account, sometimes it works and other times it won't.  So I tabulate between change username and password reset and cancel until he started working.  Very frustrating!  I changed the batteries in the wireless mouse and it would work for a day or two and then same problem.  I also tried to return to an earlier point when the computer worked as it should.  Again... problem would return.  I have tried installing and re - install the intermittent operation of device (mouse) and then the next day would not.  Finally uninstalled this mouse and bought a new Logitech wireless mouse.  He began to do the same.  Help, please!

  Hello

  (1) work well before?

  (2) don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Make sure to enable the option to allow this device to wake the computer for the mouse and keyboard and check if this can help, follow the steps provided below.

  1. click on Start.

  2. now type devmgmt.msc in the search for files and programs.

  3. on the screen of the Device Manager, right click on the mouse and other pointing devices.

  4. Select Properties.

  5. now you must click on the power management tab.

  6. now check box allow this device to wake the computer.

  Method 2 : You can also try to create a new power plan and check if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Hope this information is useful.

• the mouse does not work even if it's a brand new mouse

  Hey guys,.

  I'm running into a problem with my mouse.  It seems that even when it is plugged in, and my computer makes the sound indicating having recognized the usb device, and even when the mouse is everything is turned on, it still does not.  I even bought a new one, and that one doesn't work either.  I cannot use the touchpad.  I use a HP Envy dv7 notebook pc with windows 8.  Other stuff usb works fine, it's just these mice.

  Hello brentonoho.  I understand that you are having problems with your mouse.

  I want you to check and see how the computer detects the mouse after that you are connecting.  This would be better done by Device Manager.  Here are the steps.

  1. Go to your device manager.
  2. Expand the section 'mouse and other pointing devices '.
  3. If the mouse is listed here, double click on it and let me know if it is giving errors.

  Have a great day!  I'll keep an eye out for your answer.

• The mouse does not work in Remote Desktop

  I have a Win 7 64 bit Pro computer desktop that I try to run Remote Desktop to connect to my server Windows Home Server 2011. When I log in, my server's desktop is visible and I can see and move my mouse but when I left click of the mouse, nothing happens. Then if I click right, menu contextual office does not, but it is in the lower left corner, whenever I do a right-click No matter where I click. When the context menu displays and I hover over an element, it is not derivative of blue as it should. So basically just mouse doesn't work at all on the remote desktop.  However, the keyboard works.  I can click on the Windows key to bring up the menu start and use the arrow keys to navigate in it.

  Everything works fine on the server if I connect directly into it with the mouse and keyboard. I should also mention that exactly the same thing happens if I try to use remote desktop to connect to my Win 7 notebook Home Premium 64 - bit on my Windows 7 Pro Office above.

  And finally, if I use remote desktop to connect from my laptop or desktop to my Win XP Pro system at work, everything works perfectly fine. So is this something with the connection to a system Win 7 or WHS 2011? Any help appreciated. Thank you.

  I thought about it.  I had this program that runs on the server that reverses the mouse.  This is necessary, since I use a trackball turned 180 degrees for better comfort and "sakasa" mouse to use for the release of the mouse.  But I didn't need on the server and the system office.

• Update of Firefox seems to be frozen. The mouse does not work on Firefox at all.

  I updated Firefox when it was asked to do. Now, when loading, the mouse doesn't on Firefox at all. I've seen suggestions to go in the Options or help, but frankly, it's impossible because the screen seems to be totally frozen. The only thing I can do is to open the Task Manager and close the program.

  I will note that once or twice, it seems to work very slowly. For example, I would like to click on something and about a minute or later, he would answer a little bit, but again, the mouse never seemed not at all working again.

  Do a clean reinstall and remove the Firefox program folder before reinstalling a new copy of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 20.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will also lose your personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Spectrum 12 2 HP - 2 M7: my new HP Specter12 2-1 M7 gives me a keyboard illuminated with a black screen and then the mouse does not work.

  My new Hp spectrum 12 2 - 1 m7 detachable worked well the first four time I turned it on. Then I put in Google Chrome and it gave me the blue screen of death... I rebooted and then the mouse started working funny or the screen does nothing. I finally took the screen to uninstall Google Chrome, which really didn't help. If I get a black screen with a lit keyboard and sometimes I can get the screen but the mouse is pointing upwards. Help, please.

  You may have a hardware problem that appeared to be connected to Chrome install. You have a 1 year warranty.  > >Contact HP

• Satellite L500 - scrolling the mouse does not work

  I can't get the mouse wheel to scroll in any application using an external mouse - touchpad scrolls ok.

  I tried several different mice. The wheel button brings up a display of all the programs that I have open (Windows 7), but the wheel does nothing. I am currently using a Microsoft wireless mouse, but I tried it with wired mice as well. Nothing seems to work.

  Thank you

  Which is really strange.
  You might have installed some application that you got with this Microsoft mouse?

  I have two laptop computers and peripheral two external. One is Logitech and the other some cheap without mouse name and both have been recognized correctly suite preinstalled Win7.