The mouse is jerky

Similar Questions

• Why the cursor of my moving the mouse in jerky movements?

  I am using Windows 7 and have a new mouse Microsoft.  Any kind of surface, I place the mouse, the cursor moves in jerky movements.  It is difficult to get to the right spot.  I changed the block but no difference.

  Hello

  If it is a mouse ball rolling, remove the ball and clean the internal rollers.

  If it is an optical mouse, try it on another surface, ideally with a uniform color.

  Cross of test with another mouse if symptoms persist.

  Tricky

• Movement of the mouse jerky on Z220

  Hello

  I have several Z220 (XEON E3-1225 V2) with integrated graphics Intel P4000 as additional Nvidia Quadro 600 for the operation of 4 monitors.

  Most of the time I have problems with the movement of the mouse which is very jerky. Looks like she is dependent on the content of the screen, just under the cursor while moving.

  Any idea how you can solve this very annoying bug?

  Thank you

  McL

  Problem is solved... sort of.

  The graphics in internal P4000 has problems when a Nvidia graphics card. This seems to be known and there is nothing we can do about it - unfortunately.

  I had to disable the internal chart and add a second card Nvidia to use 3-4 monitors.

  ... just in case somebody stumbles on the same...

  McL

• My mouse is jerky. battery again the mouse.

  The mouse is a Microsoft Wireless Mobile 3500.  Dell computer.

  The mouse pointer is slow to respond and very jerky.
  Regards David 7926

  Hello.

  Take a look under the mouse and clean the optical sensor. Several times simply blow just to her.

  Dust and hair builds up over time and can make irregular movement. Also, make sure the surface on the mouse moves. You can try to place it on a different surface and see if that helps too.

• I have the key movements jerky, sticky for my mouse

  Since the last "update" - everything is moving hesitantly, keys seem sticky, mouse is jerky.  What can I do to get smooth

  return movements?

  Do a system restore and install all updates manually - install available updates one after the other.

  System Restore - how - Vista Forum
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

• the cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

  The cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

  Hello

  · What is the number and model of the mouse?

  · Will there be any changes made on the computer before the show?

  You can follow the steps listed in the link below: how to solve the pointer display problems mouse in Microsoft games: http://support.microsoft.com/kb/309703

• Windows Mail - the scrolling is jerky (slow delay) when electronic reading

  This problem seems to have slipped on me, an update of the system is perhaps the cause, but I can't identify any changes that might have caused the it.

  The problem is that in Windows Mail. When you read a mail, scroll upwards or downwards by undergoes post half a 1 second delay between the action of scrolling and scrolling of the message. By scrolling action, I mean using the previous page or next page, by clicking on the scroll bar or by using the mouse wheel - all of these actions are exactly the same jerky scrolling.

  I almost emptied all my messages while I just in my Inbox, all the other folder is deleted after the export of messages. My contacts have also been reduced to 22. I have compacted the database on a stop of messaging. None of this has made all the difference.

  I'm out of ideas because it is not possible to reintall Windows Mail only. Strange that I can't find anything in the forum. Do you want?

  Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

  A second thing to try is to remove the account completely, restart and add it again.

  While you're there, check the malware.

  Download the free version of this tool. First check the updates and then run a full scan.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

• Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

  Hello world...

  I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.

  After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.

  I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.

  I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.

  I tried two VM to be sure that the problem is not only on a virtual machine.

  First of all, the mouse.

  My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.

  I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).

  Second problem.

  After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.

  When I go to my network card configuration, IP settings are reset in DHCP mode.

  If I go again all my IP settings, Windows says:

  The IP address is hidden from the network and Dial-up connections

  folder because it is not physically in the computer or is a riser

  It does not work. If the same address is assigned to both adapters and

  they become active, only one of them will use this address. This may result

  in the incorrect system configuration. You want to enter a different IP address

  address of this adapter in the list of IP addresses for this card in the list

  Advanced IP address in the dialog box

  If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.

  If I don't answer, the network working again.

  I think it is a strange message but the work of the vSphere maybe network now.

  Anyone have any idea why my work network and mouse as this upgrade after.

  All other VM that is not upgraded so far works great.

  Thanks in advance...

  (1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

  (2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

  (a) open a command prompt

  (b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

  (c) type (without the quotes): "start devmgmt.msc"

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• The keyboard and the mouse no longer works to update you Sierra

  Hello, I upgraded to OS Sierra and I began to spend more and suspending Notepad, then I do not recognize their keyboard and mouse notbook. It forces the walk outside and then worked, but after a few days I don't work any more.

  Thank you

  The keyboard and the mouse no longer works to update you Sierra

  Hi gnardone,

  Thanks for posting in the Community Support from Apple. I understand that you are having problems using your mouse and your keyboard after the update for Sierra. View the work of keyboard and mouse are crucial for your Mac, so I can understand how this is a problem for you. I'm happy to offer assistance.

  You are having problems with the keyboard and the trackpad that are part of your MacBook or you are having problems with a keyboard and an external mouse? I recommend taking a look at the article below.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  If you're still having trouble, let us know what kind of mouse and keyboard that you are having problems with and what you have tried to solve this problem.

  Best regards.

• Is it possible to change the sensitivity of the mouse in the sierra?

  Is it possible to change the sensitivity of the mouse in the sierra?

  Open system preferences > mouse

  See: Customize your mouse > the basics of the Mac: set your preferences - Apple Support

• Change the orientation of the mouse. Click the apple icon, and then select check box on the left. However, this box is covered by a video on the use of the mouse. How to remove the video?

  Change the orientation of the mouse.  Click the apple icon. System Preferences; OK to this point; the area to select 'Left hand' is covered by a video on the use of mouse clicks. How can I remove the video (s) so I can't select 'Left hand' in the box?

  System Preferences > mouse, and then select the tab more moves.

  Then on the left, select: slide between pages

  Click scroll left or right with one finger , and then make your choice.

  You cannot delete the video. This is a demonstration.

• Check around the mouse on the screen

  Is it possible on Mac to save the area around the mouse when recording screen, exactly as they do in this video?

  https://youtu.be/3aDRBiGoriI

  First to something similar, but the mouse is not retained in the center of the recorded area. IceCream can do, except with the Mac version... I've read several times that Camtasia has this feature, but I can't (I downloaded trial for these 3 applications versions, would it not be a limitation?).

  Thank you!

  FWIW, there is a program called Screenflick which is supposed to be able to follow the mouse. Never tried it and don't know if it's compatible to El Capitan.

• When my Mac restarted the mouse arrow moves in order to type the password

  When my Mac restarted the mouse arrow moves so I can type my password

  I guess the mouse battery is fully charged and that the mouse work? You can see if the mouse is paired with your mac?

  You can also use the arrow keys + return to select a user to connect.

• must continue to move the mouse to completely open a website, what can I do to reslove?

  I have to keep moving the mouse backward for a site Web opens if I do not have the site stalls.
  Is that what I can do to fix this?

  Hello wf1717, several other affected users have reported that it was a problem caused by malicious software on their pc.
  Please run a full scan of your system with the free version of malwarebytes and adwcleaner (these two security tools are free).

  Fix Firefox problems caused by malicious software