The mouse is out of order at startup

It takes about two minutes to move my mouse quickly in front of my computer responds.  How can I fix?

Hi CEHorton,

1 when was the last time it was working fine?

2. what type of mouse you are using? Is it wireless or wired?

Method 1

This can sometimes happen if the mouse driver is out of date or is in need of an update.

I would say Hat you visit download of mouse manufacturer's website and install the latest driver for the device and check if it works.

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

See also the Microsoft article below and try them the steps if you are using a wireless mouse.

Troubleshoot the incidents of the response to the mouse or wireless keyboard

http://support.Microsoft.com/kb/838398

Method 2

If the previous step fails, then it is possible that some third-party programs installed on the computer is originally from the mouse does not respond.

I suggest that you perform a clean boot and check.

To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

See the link below to learn more about how to clean boot.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Reset the computer to start as usual

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

(a) click Start, type msconfig in the search box and press ENTER.

(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

(c) under the general tab, click the Normal startup option, and then click OK.

(d) when you are prompted to restart the computer, click on restart.

I hope this helps!

Halima S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Professional information package launched by mistake on my Mac. Since then, the computer is out of order.  The app is always open to the dock, but cannot close or force quit it. Power button doesn, t make a stop. Computer is NOT frozen, but apps does not

    Professional information file on my Mac. Since then, the computer is out of order.  App always opens in the dock, but cannot close or force quit it. Start button / stop is not make a judgment. Computer is NOT frozen, but apps does not open. Cannot shut down, restart, or use something else! Help!

    If you hold the button power for more than 10 seconds, it will not shut the MBP?

    Try a SMC reset:

    https://support.Apple.com/en-us/HT201295

    Ciao.

  • When my Mac restarted the mouse arrow moves in order to type the password

    When my Mac restarted the mouse arrow moves so I can type my password

    I guess the mouse battery is fully charged and that the mouse work? You can see if the mouse is paired with your mac?

    You can also use the arrow keys + return to select a user to connect.

  • The mouse pointer out of whack in Windows 7

    In Windows 7 (VMware Fusion 6.0.4, OS X 10.9.4), suddenly my pointer (in fact the trackpad) is out of whack. For example, if I want to close a window by clicking the X in the upper right corner, I point to somewhere to the right of the X.

    I tried to revert to a previous backup version, but get the same results.

    Any suggestion is welcome.

    Thank you

    David

    To answer my own question and the case where it helps someone else, in the Virtual Machine > settings, I clicked Clean Up Virtual Machine, Fusion of exit and restart my Mac.

    You know not if just restart the Mac would have worked, but I guess I should have tried first before posting.

    David

  • the mouse cursor sticks 5 minutes after startup

    I'm not terrible with my mouse cursor.  I start as usual - all seems to work.  Then after 5 minutes the cursor sticks.  I tried to reset then close down and ty again.  Doing this for two days now.

    Hello

    1. when the question is is produced?
    2. you remember to make changes to your computer before the problem?
    3. are you using a cable or a wireless mouse?

    Follow the steps mentioned below and check if the problem persists.

    Step 1:

    Start your computer in safe mode and check if the problem persists

    Step 2:

     
    If the problem does not persist in safe mode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: Put your computer in normal mode (step 7).
  • can not scan large dockument in a file and have the pages come out in order

    Hello and ty 4 your time - victory runing 7-64 printer is hp officejet pro 8600 (network) PDF prog. OmniPage is ultimate. my project is to digitize a 191 total page (duplex) 391.  I select Save as pdf, leter size, black and white, 200 dpi (according to support hp - would rather than 300), document type, type of file-pdf, check preview scanning, select ADF, check scan them both sides, and here for the better part of 2 hours.

    program says to keep you charging between 25-35 @ a time and when pages per document revolving around the pages and not flip and scan to hide through.  He loved two times (not a quick learner)

    When save, close and open pda here even not close to being in the order.

    now help can't get his head around that, when some chimneys of pages feeding through the adf a cmdlet opens with a simple statement to basickly Highway, but most of the time it isn't.  you need 2 click on the small image of the page and that starts the adf to run.  until full, click done, save.

    I think the problem is in this applet appearing at random times giving simple instructions and a box click OK to start the adf and it does not appear and have 2 use the pictuture small page @ lower left.

    This is all from memory after a long and frustrating day with the machine and support.  hope I explained it correctly.  everything, everything, any help would be greatly appreciated.

    the reasion 4 that this nightmare is that he he will cross OCR for search keyword.    Thanks for reading.    Gary

    The 8600 is simply not designed to handle a 382 (191 x 2) pages the analytical work. Analytical work double face (where you scan the odd numbered pages first, keep in mind, browse, then scan the even pages), looks like a copy collated job. The specification says exemplary, on the basis of 8600 model, you can do 8 pages. This is a limitation of the size of the memory. Scan at low resolution, give you more pages, which is why the interruption every 25-35 pages. It would be much easier just scan 20 pages at a time and combine PDFs on the computer (what is it good for). Or download the template more has more memory for larger jobs, or that true double-sided scans (no need to browse around).

  • Escape the mouse pointer when you press the space bar

    My tecra has developed a problem where whenever I press the space bar, the mouse pointer out of the screen and the mobile guard in the upper right or sometimes down left for about 30 seconds then stops. happens in all weather conditions of applications that I use an optical mouse or the touchpad

    Hi Dave

    I had the same problem. Initially, the mouse was mad for 30 seconds, but shortly after, it was worse. I switched the keyboard and now everything is ok.

    Of course, the pointer of the mouse was defective. I'm sure that in your case the problem is the same.

    Good luck!

  • detect if the mouse is on a text and outside

    Hi, I'm new to Flash, and I wonder if someone could help me. I have a field of dynamic text on the stage. I want to be able to do the following: when the user hovers over the text, the text is changed its content, by displaying different texts on a picture I did with texts constantly. This should stop only when the user mouse out of the field.
    I have the table and the textfield object. The question is: how will I know when the mouse is over this area? I used hitTest, but I think it's just for movies and I also tried an invisible button on top. The problem is that the action to get the text out of the table must be infinite, through the table as many times as necessary, when the mouse enters the field. I tried onRollover, but then I wouldn't be able to break the loop. So I need something like:

    When the mouse enters the button or the text for that field. As soon as the mouse is out of it, stop.

    I did it once to the Director, but logical flash is different...

    Could someone give me a clue please?

    Hello

    resemble post you twice the same message so ill post again my answer! Hope this will help you...

    try something like this:

    your textfield is called textBox and put it in a movie clip called myMcBtn. Suppose also that your table is called textArray.

    var textArray:Array = ['me', 'you', 'them', "we', 'my dog',"and everyone"];
    var loop: number;
    var myArrayPosition:Number = 0;

    myMcBtn.onRollOver = function() {}
    Loop = setInterval (startTextLoop, 2000);
    }
    myMcBtn.onRollOut = function() {}
    stopTextLoop();
    }

    function startTextLoop() {}
    myMcBtn.textBox.text = [myArrayPosition] textArray;
    myArrayPosition ++;
    If (myArrayPosition > = textArray.length) {}
    myArrayPosition = 0;
    }
    }

    function stopTextLoop() {}
    clearInterval (loop);
    }

  • System freeze about 5 minutes after startup. Can move the mouse, but can't do anything else.

    Computer Compaq laptop turned on updates of Windows, firewall Windows, AVG anti-virus, etc.
    He has suddenly frozen 8 months ago - would not respond other than to be able to move the mouse.
    Does not "left/right mouse click" or "Ctrl + Alt + Del" or "power button."
    After a long waiting, pulled out the battery/power supply.

    Restarted in safe mode, was able to run AVG, but froze again.
    Has helped me select the AVG window and move it autour, but nothing else.
    Was not able to click with the right button on the taskbar to make appear the Task Manager.
    Only way to reboot was to remove the battery/power supply.

    Same thing, it is is happening whenever I start.
    System access for about 5 minutes and then freezes.

    I am able to get into the system at the start restore.
    Have a lot of personal photos on the laptop.
    Please provide a solution so that I can extract the photos and then restore the phone to factory settings.

    Thank you.

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    http://www.Compaq.com/country/cpq_support.html

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their way of doing recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • the mouse stops working during xp startup

    Dell Dimension E520 my friend has xp on it. He got the blue screen on startup. I was able to run chkdsk/r from the recovery console and got rid of the blue screen. However, when the computer starts, it now receives in the user account log in screen (5 users), but the mouse no longer works. The light on the keyboard goes out to halfway through the loading process. I tried different USB ports. But there is not a single death. The mouse and keyboard work fine in the computer diagnostic program. There only seems to be problems with the material, everything passes.

    I tried the Dart program, but when he put the xp splash screen I got the blue screen. He suggested that the mbr is damaged. The drive works on other machines. I resisted using the fixmbr command because of all the warnings on the damage caused to the left if a virus is present. I think that a virus caused this, so I stopped there. Not sure if fixboot will help, have not yet tried. I tried to plug the hard drive into my computer as an external, but it wouldn't let me access the hard disk directly. I am running win7 32 bit. My computer sees the drive, I can fill administrative maintenance hard disk volumes (was surprised to see the OEM - Yes, 3 volumes, the main volume-Yes, don't know about this third volume (a little larger than the volume of OEM), can't do anything for her). I can win permission, appropriate, audit, but when I go for effective permissions I'm grayed out. I've tried different users (me as an administrator, the directors, anonymous system) does not. I managed to backup the drive on my computer, but I can't access the files when I get back. I was able to run my antivirus program and it found 2 viruses it says that she deleted. I tried to plug the hard drive into his machine, but nothing has changed. I tried to access the files he wants from the recovery console, but was denied access.

    His family has a lot of pic and doc that are important to them, so I try everything short of a clean reinstall, and I'm at the end of the roll. Any suggestions would be greatly appreciated.

    Hello Bubba Doug,

    Sorry you are having this problem!  In addition to LNG. Ladislav Cermak, I've added a link below where another user was having this problem.  Please let us know status.

    Microsoft Answers:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/access-denied-when-trying-to-take-ownership-of-an/0778dc1c-417D-4536-AA07-2f4bef614914

  • Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

    Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

    I would be out of system repair and safe boot mode:

    Start your PC, just before the system loads the Windows operating system; Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: sfc/scannow

    This will check for any breach of integrity

    Restart your system

  • MBPro stops during startup.  If I continually move the mouse during startup, it will go on my desk.  If I launch Firefox and try to do anything, it stops.  This can be corrected?

    Mac Book Pro stops unexpectedly during startup.  I can get it to go to my office, if I continually move the mouse during the boot, but after I launched Firefox and try to do anything, it will stop.  If I try to run the scans of security or reinstall OS X using the command + R and disk utilities, it stops.  Sometimes it gives me a box saying something about stopping with various options such as Cancel, stop, reboot, etc., but it makes no difference that I click on, she stops.  Sometimes, I get no warning at all.  This can be corrected?  I'm not savvy Mac.

    Reset the SMC could solve problem then.

    Reset the management system (SCM) controller on your Mac - Apple Support

    Also try the safe mode boot.

    Try safe mode if your Mac does not end commissioning - Apple Support

  • Pavilion 550-153NA: allow me to interact with the mouse and keyboard when Windows 7 starts at startup

    Hello

    I am trying to downgrade from Windows 10 in Windows 7. I tried to install Windows 7 but it keeps telling me that "Windows Setup experienced an unexpected error. To install windows, restart the installation. "I rebooted several times, but I still have the error. Then, I tried to install it by starting the drive at startup. All charge very well and the configuration screen appears. But I went to move the mouse, but it should not move. I tried several different mice and keyboards, but there was no hope, both USB 3.0 and 2.0. I did some research and found that you have to enable 'Legacy Support' in the BIOS. I did this, but there was still no movement.

    If someone could apply their knowledge via a comment, it would be very appreciated that I constantly tried since end of December 2015!

    Thank you very much

    I would try this new link.

    __Windows Setup has encountered an unexpected error. to install the reboot, the installation error code 0x0

    Let me know if it works

  • Is there a key on my laptop to immobilize the mouse in order to to fix a mobile mouse?

    Original title: itasha

    Is there a key on my laptop to immobilize the mouse in order to to fix a mobile mouse?

    It depends on the laptop. Some laptops have a button somewhere or even have an option in the touchpad settings to automatically disable the touchpad when a USB mouse is connected. You will need to consult your manual for more information.

  • I try to use windows excel for windows vista and am asked for a product key. How can I find out what order to use the product?

    I try to use windows excel for windows vista and asks me to enter a product key. I am the sole owner of the computer but have no installation CD for recharge Excel. How can I find out what order to use the product? From now the product doesn't let me do anything. Help, please!

    Hello

    Did you pay for Office (including Excel) in a packaging separated when you bought your computer?

    Office is not included with your purchase of computer for free.

    Most new computers come with a trial version of Office that lets 'x' number of days usuage.

    After this test times out, you will have to buy Office.

    And the product key on the computer case or laptop for the operating system, not for the desktop Suite.

    Here is the link for the Microsoft Store to Office products:

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Office_Category_Page?ICID=Home_4up_1_OfficeCatPage

    And you might be interested in the free Open Office Suite of Office Applications.

    http://www.OpenOffice.org/

    For any other question about Office, please repost in the Office Forums:

    http://answers.Microsoft.com/en-us/Office

    See you soon.

Maybe you are looking for

  • How to add a value to a column of a string of pop up

    I am really inexperienced with spreadsheets, but asked me to help create a timesheet for a rotational system. I know that the time could be manually entered and calculated in duration but as there are only four options, let's say A, B, C travel and O

  • Satellite A100-570 slow downs the wide connection band

    I have a laptop Satellite A100-570. I bought this in July antiques. Just open the laptop, not even connect to the internet it manages reduce my speed on broadband.I know this because I'm doing a test of speed before and after the opening of the lapto

  • iPhone 6 more - simply died trying to access emails

    I need advice on how to solve this problem. I have an iPhone 6 more than 3 weeks and I noticed on and outside that the screen for a fraction of a second will be white (it's black screen) when I flip to make calls to the e-mail.  I noticed this happen

  • Photosmart HP 7510: Change what black ink cartridge is used.

    Our 7510 HP ink slots for small and XL cartridges, however it will not use the small cartridge ink. How to change the parameters to pass to the thin cartridge XL, small is running out of ink and I can't find the black ink cartridge (Photo) in stores

  • Xbox 360 scan windows media center for the new music?

    I just added some new music to my windows media center and the music does not appear on my xbox 360. is there a way to synchronize?