The mouse scroll wheel stopped working after windows updates
I have a Targus optical mouse with a scroll wheel; and he recently worked like this: when you use the scroll wheel in multiple windows, it would scroll the window (to move the vertical scroll bar) goes up and down. It was a huge time saver, and I was used to it.
I installed recently a whole bunch of patches from microsoft, including Windows 7 SP1 and Microsoft Mouse and keyboard Center. The device is not listed in the center of the keyboard and mouse MS, but there is always a control-> mouse Panel.
In Control Panel-> mouse, it has still the tab saying "wheel" roll the mouse to a notch wheel to scroll the rows x number of rows (it is selectable, I had 3, but tried to change as well); but it no longer works. Now, it seems, I have to press the wheel to click, which then shows a circular scroll up/down, icon, and then I physically move the mouse up and down, and if I push down to click again on the wheel, I'm back to a regular movement of the mouse pointer. It's MUCH more inefficient than the use of the wheel, so I'll try to figure out how I can get the drive working again.
Should I uninstall MS Mouse and keyboard Center? I thought about uninstalling and reinstalling the driver; but there is no mouse listed in the Device Manager (only has my touchpad there...) It's a Targus optical mouse amu10usz; and even once, it was working fine before the installation of upgrades...
Thanks for any help,
A.J.
Hello
What is the number and the model of the computer?
I will suggest you to check the mouse with different USB port or another computer, still question remains the same! Follow the mentioned methods:
Method 1:
Step 1:
Update driver mouse
a. click on start.
b. click on Panel.
c. using the drop down next to the opinion of: in the upper right, select large icons.
d. click on mouse.
e. click on hardware tab, click the Properties button.
f. click on the driver tab, click set to update driver.
Step 2:
Uninstall the recent update and look for the question. You can first of all uninstall the update MS Mouse and keyboard Center and check.
http://Windows.Microsoft.com/en-us/Windows7/remove-an-update
Method 2:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3:
The problems with the mouse button or scroll the parameters
http://support.Microsoft.com/kb/303091
I hope that helps!
Tags: Windows
Similar Questions
-
laptop keyboard stopped working after Windows update.
have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.
As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.
It suits it much of the time.
-
Satellite A200 - Touchpad scroll function stop working after BIOS update
Hello
After that I updated the BIOS (drawn from the Toshiba site), the scroll function stop working. I can still click, move the mouse pointer, but can no longer navigate the touchpad. Relocation of Synaptics driver is not the problem. The strange thing is that the computer detects only my touchpad as standard pointing device (port: PS/2) device. "Graph of pressure" and "Moodpad" function also stop working and complain "this program requires a Synaptics TouchPad, and the Synaptics Pointing device driver.
My computer is Satellite A200 PSAE0C-TR605C.Anyone know the reason?
Thank youDanny
Hello
What operating system is installled and which is more interesting: what version of BIOS you have installed? Why I ask? Because there are 2 different BIOS versions, one for Vista (1.80) and one for XP (5.20) which means that when you Flash a BIOS XP on a computer with Vista installed then some functions do not work properly as the FN keys or the touchpad.
If please check this out and make sure you have the appropriate BIOS installed.
Welcome them
-
X 500 - 10W QOSMIO webcam stop working after Windows updates
Hello.
I have a Toshiba QOSMIO X 500 - 10W PQX33E-00R00CIT.
When I format my laptop and you reinstall the operating system Windows 7 Ultimate 64 bit, the webcam works perfectly.
After I updated windows via windows update webcam stops working. Also with Windows 10 company LTSB. What should I do? Thank you.P. S.
According to me, is just a problem of software, not hardware. The webcam works perfectly until I do the windows updates! ' * ' Microsoft!I find the problem. Do not install the latest version of Microsoft Silverlight. I hope that I formatted my computer for the last time!
-
Outlook 2010 has stopped working after Windows updates
November 11, 2015, my desktop, operating system Windows 7, installed about 28 updates to Windows. When I then put running the computer and open Microsoft Outlook 2010, Outlook closed almost immediately and this message appeared: "Microsoft Outlook has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "(I don't check other office software).
After the problem with Outlook 2010, I rebooted the computer several times and each time has experienced the same problem with Outlook 2010.
I used system restore to restore the system to before the updates of Windows, which included a critical update. Outlook, then worked correctly. I changed the settings for Windows Update to "Never check updates" so that Outlook is not yet damaged.
Was it something wrong with the Windows updates?
The problem was solved when Microsoft released a revised version of the KB3097877 update. Maxwell Joseph, moderator of the Forum Microsoft, announced this in the post, he created at 23:22:03 on November 12, 2015, on the thread titled "update KB3097877 crash.
He said ' Microsoft has released a revised update, so we suggest you go ahead and uninstall Windows updates KB3097877 > installed updates. Restart the system and run the updates check and reinstall it back. »
-
Broadcom Wireless stopped working after Windows updates
Hello, everyone!
I have a Pavilion dv6000 with wireless network. Everything was OK, but last Monday the blue wireless light was suddenly always amber and me did not have wireless access. These are the facts about my problem:
* I reset my laptop to factory - wireless configuration works very well
* Windows Update all installed, but one, updates - wireless works fine
* I installed the new Windows Live Messenger - WIRELESS STOPED working
* I uninstalled Windows Live Messenger - wireless works fine
* Windows Update installed .NET Framework 3.5 (it was the update of Windows I jumped at step 2)-without WIRE EFFONDRES WORKING
And now, my problem is that even if I try to "roll back" to a "restore point" before installing .NET, I get an error and I don't seem to be able to "Uninstall".NET 3.5. On the other hand, the pilot "Broadcom Wireless 802.11 g" has disappeared from the Device Manager and I don't seem to be able to reinstall it, or not reinstalling patches 'HP Wireless Manager' the problem.
Can you help me, please?
Thanks in advance,
Nuno
Work on laptop of my boss's son is having the same issue... I got to work by going into safe mode device manager and delete all references to pci bridge and restart... xp detects the wireless card as well as all pci bridge components and everything is golden... update XP sp3 now and go see if only the pipes still wireless card... will put in day this post when finished... im on xp, but I'm sure it would work for vista too many... questions you can email [email protected]
* Update *.
Installation of XP Service Pack 3 has made clear the wireless card again... is returned in Manager mode and the security apparatus and remove all references to the PCI subsystem devices except Bus PCI and ISA standard PCI bridge and rebooted and bam wireless card is back... it is quite boring... my recommendation would be to turn the builtin wireless power off and go buy a wireless usb card and do with it...
Message edited by Akrifay on 02/20/2009 14:16 -
The cutting tool does not work after windows updates.
I read answers to similar questions about the failure of the cutting tool. I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware. It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work. I don't have to go through hoops of restorations etc to get something it seems work was broken by updates. I'm about to go to a Mac.
It worked for me! Thank you!
-
Task Scheduler stopped working after Windows updates
This just happened to one the many updates just installed. Microsoft does not identify the Console as being updated but I did a restore + the task manager has been fine.
Installed November put up-to-date and Scheduler of tasks is still a Virgin is in one of the updates. hidden of course. If someone found the number of update, please send along!
Hello
Unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.
You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:
'Remove an update'
http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update
When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again
"How to hide or show an update of Windows Vista"
http://www.Vistax64.com/tutorials/72491-Windows-Update.html
Here's how to chanage update settings, if you think it is necessary to:
"Understanding Windows Update and Extras in Windows Vista and Windows 7.
http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/
Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system
See you soon.
-
Satellite L350-262 - WLAN stopped working after Windows update
Hi - help please!
Everything was fine until an automatic update on windows 7 applied about 14/15 December 2010. After that I turned off the wireless LAN to save battery while off line, then the wire will not pass on, I am currently connected via a cable connection 10/100.
I tried a restore when this problem first occurred, and it worked. However, the updates have applied new themselevs and I cannot now restore the update that seems to have caused the problem before the date on which took place.
I updated the driver that the adapter is realtek adapter and I have applied this update - realtek_wlan_win7_20100702, it did not work.
I ran the diagnostics which indicates the following:-Please note the wireless switch on the before the computer is on, and shows on the page of diagnostic, Diagnostics tool recognizes also when the switch is off, so it doesn't seem to be a physical problem with the wireless LAN switch, but something software related that has disabled the wireless LAN
Network card diagnostics information:
Network adapter wireless network connection driver information:
Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
Reference of the manufacturer.... : Realtek Semiconductor Corp.
Provider of...: Microsoft
Version...: 6.1159.323.2009
INF file name... . : C:\Windows\INF\net8187bv32.inf
Date of the INF.... July 13, 2009 20:46:35
Name of the section.... : RTL8187B.ndi
Hardware... ID: usb\vid_0bda & pid_8198 & rev_0200
Instance... state flags: 0x180200a
Status code of Device Manager. . : 0
IfType...: 71
Type of physical support...: 9Diagnostic information (wireless connectivity)
Details on the diagnosis of wireless connectivity:Information for a diagnosis of connection
The GUID of the interface: 9b8b426b-4319-455b-86c5-f6b856e40456
Interface name: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
Interface type: Native WiFiConnection incident diagnosed
List of visible access points: 0 item (s) total, 0 article (s) poster
History of connection
Information for Auto Configuration ID 1
List of visible networks: 0 item (s) total, 0 article (s) poster
List of favorite networks: 0 item (s)
Diagnostic information (wireless connectivity)
Details on the diagnosis of wireless connectivity:For all the info on this session, see the event information of wireless connectivity.
Helper class: Auto-Configuration
Initialize status: successInformation for a diagnosis of connection
The GUID of the interface: 9b8b426b-4319-455b-86c5-f6b856e40456
Interface name: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
Interface type: Native WiFiResult of diagnosis: problem found
Root cause:
WiFi is disabledDetailed root cause:
Radio is off (SW switch)Repair option:
Turn on wireless capabilityNetwork Diagnostics log
File name: 3E316BFA-A7C3-496A-8FF9-810B3E247842. Diagnose.0.ETLCollection information
Computer name:
Windows Version: 6.1
Architecture: x 86
Time: Wednesday, December 29, 2010 08:56:08Anyone has any ideas I would be very grateful, thank you
Hello
as I remember, there was the user with the same question in this forum. I don't know if he could solve it... I recommend:
1 remove all WiFi drivers installed on your system and restart the round, then. Afterwards, go to the driver page and download wlan driver http://aps2.toshiba-tro.de/wlan/?page=downloads
2. If it still does not, restore to previous operating system -
LabVIEW stopped working after windows update
Windows XP 32 bit with Labview 2012 Service Pack 1 - Windows Auto-implementation to date 11 may 2013. After update, Labview crashes at startup, nothing suits him. I tried to restart and all the usual nonsense. You can open the screw, but then the CPU enters a State of usage of 50% or 100% (which seems to be random) and Labview hangs just w / of the hourglass icon and never answers. I can open NI MAX and querry various instruments, but crashes just Labview itself (start or any what VI).
I need fix as soon as POSSIBLE, very tight edge scientist, cannot wait TO open their doors Monday morning.
Help, please!
-
The mouse scroll wheel does not.
Original title:-mouse wheel stops
Hello
In recent weeks, the mouse wheel stops working after a few seconds, when clicking to the left or right, it works again for a short period.
I've updated mouse driver win 7, changed the question even the mouse. Its in all the applications I use, ms, so many others.
Hope someone has an answer.
See you soonHello
Made the exercise of boot minimum and found the service which double clicked, gladinet. Order the service.
Thanks a lot for your help. The support page is also very clear.
Really appreciate your help
Take care -
Move between photos using the mouse scroll wheel in the library module
I've recently upgraded to LR6.4, in the library, to the Magnifier module, I can't move between photos using the mouse scroll wheel. When I point the cursor on the picture, I get a "magnifying glass". The only way I can move between photos is to click on the film. I was able to use the mouse scroll wheel to move between pictures before. Help, please.
It doesn't matter whether or not this option is displayed. Just open the preferences and restart LR should dissipate it.
-
Canvio Basic 2 TB suddenly stopped working after Xbox update?
While to say that the title of the hard drive has stopped working once an update has taken place on the Xbox one a few days ago.
Now I tried it on a different Xbox one (didn't read), and also tried on a computer laptop windows 10 has yet no chance, at first he tried to install it but only got up then stopped, but even after having passed, still nothing, now its there if I go to device management (depending on whether its fine) but I can not even open the hard drive itself.
I've had it for about 6 months maybe a little more, but still is it safe, placed just behind the xbox connected, never needed to move it.
I hope someone can help or suggest something, but im now puzzled.
Thanks in advance.
I have the exact same problem mate
-
My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5
My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?
NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!
olou,
If the suggestion on possible recording by Larry fails, see this page
https://www.Adobe.com/account/my-products-services.html
I'll try to ask a personal forum friend who knows what to do.
For download, read this
http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html
and update, see
http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows
http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh
-
I use the latest versions of Firefox as soon as they are available on a PC in Windows 8. Firefox works fine, usually a few hours before the annoying problems manifest. The problem, that I address here is some widgets, including some widgets Firefox and widgets (such as buttons and selectors menu drop down) isolated in some sites stop functioning. In Firefox, the Menu button (the icon of three dashes stacked) stops working. And the download arrow sometimes stops working too. Sometimes, sub-items as printed stop working. A pull-down, the high and arrow down keys could still work even if I might now be able to select with the mouse. Closing and re-opening Firefox usually restores some functionality. However, I usually have to restart the PC to restore all the functions that has stopped working. So I'm good for usually a few hours yet. Another inconvenience, which others have addressed, is the appearance of Chinese characters - to research on the tab toolbar labels at the top. Restart Firefox gets rid of these for the moment. Thanks for the study.
Philipp,
Thanks for the quick reply and for the advice that you have presented.
I downloaded and installed the graphics driver that you recommended. The process went well. I have hardware acceleration disabled by an earlier recommendation to remove these Oriental characters.
After two days of problem apparently having been fixed, I considered replying to report success. But before I could get around to doing so, abnormal behaviors reappeared. Thanks for confirming the source of these Oriental characters. Previous research indicates that the source was with McAfee or Firefox, a bit like a battle for "pointing the finger" in between.
Best,
JRSTOUDT
Maybe you are looking for
-
Can not see the photo of icloud on iMac
Goodday! For a while, I have a problem when you try to view the picture on my iMac that were made with my iPhone or iPad. Photo of what I do with my iPhone stream nicely to icloud and I can almost immediately see on my other devices (iPad etc.). Only
-
Generic host process for win32 services has encountered a problem and cannot update windows
Whenever I start my computer, I get this error message "generic host process for win32 services has encountered a problem and needs to close." The details of this problem are: (szappname:svchost.exe), (szappver:5.1.2600.5512), (szmodver: 0.0.0.0), (o
-
wsastartupo failed or if you have the wrong version of the installed winsock
Can solve this problem without a recovery disk?
-
List all files of a certain type
Hello I'm trying to get all the files of a certain type of file (card and internal storage) system. I could just recursively iterete in each directory, filter the files and create my list. Is there a more elegant way to do it? As far as I KNOW Androi
-
5 days ago for the first time in my life, after many years with Photoshop, I got this error message when I open a. PSD document:"Some of the text in this document layers were pixelated because an error prohibited them to read.On my file psd;-a busine