the mouse trace on the surface of the lacquer

wireless mouse ok on wood office crawler but not on the surface of the lacquer



1. What is the number of brand and model of the wireless mouse?

2. were there any changes (hardware or software) to the computer before the show?

Perform the steps in the article if you have Microsoft Wireless Mouse and check if the problem persists.

Hope this information helps.

Tags: Windows

Similar Questions

  • The best mouse pad fabric of sidewinder x 8?

    My sidewinder x 8 tends to jump on my black fabric xtrac ripper. is there a specific fabric mouse pad that works best with the 8 x or mouse hate cloth?


    I would like to know a good point too,

    I'm so frustrated with the feet is not sliding on a decent surface. I tried every color feet and there is certainly a difference, the mouse works under par on a lot of surfaces, the worst of any mouse I've ever owned. Pretend that it works (decently) on all surfaces is just crazy.

    Let me be clear, the sensor of the mouse takes and works very well, you just can't move (drag) the mouse reasonably on these surfaces (perhaps due to the "foot" configuration?)


    I had all sorts of things around the House to see what was the best surface. Hey presto, the magical surface for this cushion is, you guessed it, plastic clean and smooth, I use a thindisposable plastic Board my wife bought at Aldi (in a package). The mouse works brilliantly on it.

    Among the surfaces that were terrible, we, (Incidentally, even my old microsoft intellimouse mouse works fine on all these)

    fabric mouse pad (cheap generic freebee)


    Vinyl office

    Office wood


    I would however really buy a mouse is appropriate, so if someone could answer post from gonintendos that has a good point for this mouse , they are happy with it please don't.

    Also, having said the above, the mouse is great now I have the correct surface (10/10 better than my old logitec G7 that says something)

    See you soon



    my mouse jumps all over the screen, and it suddenly stops moving.

    Test your mouse on another PC. If the problem persists, the mouse is defective.

    Test another (known working) mouse on your PC, if the fault persists your PC is faulty somehow.

    It's a mouse laser (light rather than a rolling ball works)? If it is try different a surface or a mouse pad. Some surfaces, e.g. mouse pads and mousepad hologram photo will lead crazy optical mice.

    If it is a bearing ball mouse, clean the rollers inside.

    It is USB, PS/2 or series? Wired or wireless? Check the battery if wireless.


  • The response of the mouse becomes slow and I get the low battery warning

    Original title: Use the Microsoft Wireless Multimedia Keyboard 1.1 model 1014.  Recently, I had replace the batteries in the mouse at least once a week.  Is there a solution?

    The response of the mouse becomes slow and I get the low battery warning.  Until this started happening batteries have been change less than a month.


    1. What is the brand of mouse and the model?

    2 have you ever done any recent software or changes to the hardware to the computer?

    If you use the Microsoft mouse, I suggest you follow these methods:

    Troubleshoot a wireless mouse that does not correctly:

    Troubleshoot the incidents of the response to the mouse or wireless keyboard:

    Use the following tips to get more life on the batteries in the keyboard and mouse:

    a. use the mouse on a surface of clear color. With the help of the mouse above a black surface can deplete the battery at a faster pace.

    b. do not use the mouse on a glass surface.

    c. when replacing the batteries, use alkaline batteries. Other types, may not last as long.

    d. when wireless devices are not in use, store them near the computer.

    I hope this helps!

  • Windows 7 on a dell Inspiron 1545 computer hides the pointer when typing games

    Whenever I load a game or enter the Media Center windows that my pointer goes behind the screan. Also, I have an asus with windows 7 and do not have this problem on this issue. Only the dell. Is there a way to solve this problem. I contacted dell 4 is they say its software and they will not fix it. HELP PLEASE


    1. This only happens when you play in a particular game or all games?

    2. If it works well before?

    The mouse cursor should be hidden when you are running Media Center in full-screen and don't appear when you move the mouse.

    Step 1: You can try the following steps for the mouse traces of the exit ramp and check if it helps:

    a. click Start and select Control Panel.

    b. click on mouse.

    c. click on the Pointer Options tab.

    d. Uncheck Display pointer trails.

    Step 2: You can also try to update the graphics card and check if it helps:

    For more information, see the link to update the drivers: ' t-work correctly

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • graphic design of fuel with traces of real-time map


    I wonder if someone met fuel 3d design graphics containing factor of load on x and rpm on the y-axis. The ratios of fuel (running lean and rich) appear on the 3d graphic function where the mouse cursor is in the field. Its very common to see software solution turnkey in the market, but I hope that labview is capable of doing. If so, could you please help me on where to start. There are a lot of sensors on the car and I compactrio and everything also. I need help on the place where from, like which screw do I and this is the usual way of signal acquisition using daq assistant and so on?

    Thank you very much in advance for your help.

    Thanks and greetings

    Hello Kwaris,

    I'd say the best place to search for the start-up of your cRIO's finder example in LabVIEW itself there are a lot of examples available out there that might only need to the alternances of mine to find the solution you are looking for.

    In addition the cRIO examples there are several examples that illustrate the use of 3D graphics who has X Y and Z axis

    The image below is the example of trace of 3D surface.

    I hope this helps you get started.

    With respect,

  • Mouse ARC broke.

    Original title: ARC Mouse

    I bought a mouse Arc Ms.  Big mouse.  Within 6 weeks, the little clip on frog plastic, ultimately contributing to the mouse to drag on surfaces, broke.  It was very fragile.  Now, the rubber hits the office and is sticky.  The mouse is now much less usable.  This is not a cheap item, and having it break so quickly is disappointing.  Where can I source a replacement clip?



    Broken or defective products

    For the quick replacement of the broken or defective product, call warranty directly: support of warranty for the United States, call the 800-360-7561. For Canadian assistance cover, call the 800-933-4750. Or see this article for more information:

  • Pen pro surface 3 does not work.

    hey y'all,                                                                                                                                                                                                                                                                                  my new Surface Pro 3 pen does not write, right-click or erase. I changed the batteries AAAA twice to nothing does not. Any ideas on what's going on?                                                                                                                                                                                                                                                                                                                                                                                                                                                                 Thanks,                                                                                                                                                                                                                                                         Gianni

    Hi Gianni,

    I suggest to follow the steps in the link below and check if it helps you.

    Troubleshoot the Pen Surface

    If you still have problems I suggest you contact the office of the support on the information provided below Surface.

    Contact Office of the response of Microsoft for the Surface

    Email us if you have any other issues related to Windows.

  • Lack of pen pressure and Tilt modifiers on Surface Pro 4 pen?

    I just installed Adobe animate on my 4 Surface Pro and I do not see the modifier at the bottom of the tool palette buttons that allow the pen pressure or tilt when using the Brush tool...

    N ' any help? Thank you


    Animate is a Wintab app and requires drivers WinTab detect and work with pen pressure and Tilt. You can also refer to the Microsoft page e-pen #pressure for more information

    Thank you!


  • Render blackens when GPU acceleration + .psd in project


    Got first Pro CC 2014.0.1 / build 8.0.1 (21) and a weird and very boring question:

    When the GPU rendering is turned on, as soon as I import a .psd (recorded with "max compatibility option) in the project, make a sequence with her to make animations, the render window renders nothing, it's black. Sound is always in progress btw. I have to switch to basic render. Then I can't do anything about this either in real time, as I do a request for many effects and animations of high resolution with smooth zooms, stabilization, correction of the colors and stuff like that.

    Anyone facing the same question or have a piece of advice is welcome.



    -Windows 7 Ultimate x 64 (64-bit, EN)


    -GPU = Gigabyte GTX 670 gets X 3

    -Processor = Intel 2600K @ 4.6 Ghz

    -RAM = 2133 Mhz CL9 G.Skill 16 GB

    -MB = Asus P8Z68 Deluxe

    -Sound card = M-Audio Profire 2626

    -PSU = SEASONIC X-SERIES - 850W 80 + Gold

    -HARD disk = Western Digital 3 to, Seagate 2x4TB + 2 TB

    -SSD = Samsunf 840 Pro 256GB

    -Case = Fractal Design R3 Silver


    -Screen = BenQ XL2420T + Samsung F2380M

    -Keyboard = Logitech illuminated

    -Mouse = Steelseries Sensei

    -Surface mouse = Steelseries Steelpad 9HD

    -Helmet is Audio Technica ATH - M50;. AKG K271 MKII

    -Speakers = M-Audio BX6

    -Microphones = Rode NT2 - A; Rode NT5 (pair), Shure SM57

    Well, it's been fixed since the last update for Premiere Pro that may have not been automated for some reason any!

    2014.2 version 8.2.0 (Build 65) versus 8.0.1 (21) Build

    I am so happy! I can now works perfectly again!

  • Pairing the mouse with Surface

    I'm trying to pair the mouse Microsoft Wedge Touch with a Surface RT running Windows 8. It takes a long time to appear in the list of devices in the pair. On the rare occasion, it is not and I hit the pair, I get the message: "this has not worked. Try again and make sure that your device is still detectable. "I've been waiting with Microsoft support for half an hour and I always listen to shitty music.

    Does anyone have advice for me on how to fix it myself? Thanks in advance!


    Hi Sue,

    If you try to use Microsoft compatible Bluetooth wireless keyboard or mouse and the input device does not work, maybe it's because your computer does not detect the device. Follow the steps in troubleshooting these items and check if you help:

    Troubleshoot Bluetooth devices

    Troubleshooting: mouse

    After troubleshooting, follow the steps in this link:

    Wedge Touch Mouse and the Arc Touch Mouse for Surface

    I hope this helps. If you need help with Windows, let us know and will be happy to help you.

  • Mouseless in New York... Microsoft Wireless Mobile mouse 3500 has stopped working on the Surface RT

    This mouse was working well, but no more. The error indicates the device is 'unknown '. Tried to download the driver, but would not be executed (called store but nothing relevant). We have a couple of these mice, all had worked and now... nada. I wonder if the change occurred after the installation of an update of the RT software? Thank you.

    Turns Microsoft store looked my device and found that the usb port was not. They replaced my RT surface

  • Equivalent of the mouse above the surface

    original title: equivalent of the mouse on

    When using of surface, how the mouse action? When I touch it, it just snaps. is there a gesture that simulates mouse and not click.

    Hello AbhishekSrivastava2,

    Instead of a simple touch, you tap and hold for a few seconds. Here is a link to support the parameters:

    When you do this, is the Touchcover or Typecover connected to the device of RT? If this is not the case, there is a known issue with the menu drop-down lists in Internet Explorer 10:

  • On my Surface Pro when in the interface right subway click button only keyboard not act the same as the right mouse click on

    Today, I tried to remove/uninstall a tile.  Without the keyboard and mouse, I was not able to create a right click of the mouse.  When you use Notepad on the touch keyboard pressing the right panel maintained from app.  I turned on my mouse to the corner and then the right click enabled me to uninstall the tiles/app.  Too much confusion.  When using the Surface in the form of tablets there should be a right mouse click gesture that works reliably.

    When using the Surface in the form of tablets there should be a right mouse click gesture that works reliably.

    I think that the user is supposed to 'discover' it takes more than a prolonged pressure (touch right click) to get the tile showing options.   In addition, you have a pen?   FWIW, I think that it is even more difficult to use reliably for this procedure, but if it worked it would be my preference to the touch.

    To remove the splash screen slab, drag down on

    Tip: To see all the checkmarks flashing by unnoticed in this video?   There are some clear examples in there, but most of them can barely be seen.

    Good luck
    Robert Aldwinckle

  • How can I trace the movements of the mouse and ignore the movements not

    I have a program that records the position of the mouse each 300 ms over a period of approximately 9 hour minute.

    However, I need to know the mouse ONLY when it is not the same now previous position (sometimes the user stops talking. I don't want to save 5 minutes from the same position of the mouse)

    Here is the original program

    var drawTimer:Timer = new Timer (300, 500000);

    drawTimer.addEventListener (TimerEvent.TIMER, timeSampler);

    function timeSampler(evt:TimerEvent):void {}

    {trace (mouseX, ', ' + mouseY);



    I tried to create a variable to capture the position of the mouse at a specific time

    var posMouseX:Number = mouseX;

    var posMouseY:Number = mouseY;

    and to add a conditional statement in the function

    If ((mouseX! = posMouseX) & & (mouseY! = posMouseY))
    {trace (mouseX, ', ' + mouseY) ;}}

    but I do not do this correctly because I no more than getting every movement of the mouse or none

    Can anyone suggest a better way to do it?

    Thanks in advance

    The code above can do what you want

    you will get the values only when the mouse is moved, there will be no duplicate values

    stage.addEventListener (MouseEvent.MOUSE_MOVE, onMove);

    function onMove(e:MouseEvent):void


    trace (mouseX + "," + mouseY);

    Add your code here to save the values, for example:

    myArray.push (mouseX, mouseY);


    as the timer still counting down and on full it will delete the scene event listener.

    var drawTimer:Timer = new Timer (300, 500000);

    drawTimer.addEventListener (TimerEvent.TIMER_COMPLETE, timeSampler);

    function timeSampler(evt:TimerEvent):void


    stage.removeEventListener (MouseEvent.MOUSE_MOVE, onMove);


    drawTimer.start ();

Maybe you are looking for