The multimedia touch panel on Satellite A500 buttons are not all workers

Similar Questions

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• I reciently reinstalled windows and now the fence, restore down and minimize buttons are not mixed together.

  I reciently reinstalled windows and now the fence, restore down and minimize buttons are not mixed together. they are indervidual buttons. Have all the updates and service pack installed.

  I saw the screen shot, I think that Aero is disabled, or the Desktop Window Manager Session Manager service is disabled or stopped. Try to run the troubleshooter 'display the Aero effects. " And when firstly, you had the drivers that do NOT support Aero and then updates, Windows does NOT automatically update the settings. You must recaulculate the computer for Aero Performance Index is enabled.

  Or you can see more help on this page, which contains explanations of the Aero and a link to a Web page for downlading an application which solves the problems.

  Hope that helps!

  Marko Calasan.

• New tab and close tab buttons are not enabled

  Firefox new tab page and close tab buttons are not neabled and do a right-click shows the same functions that is not available.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• I am currently using Adobe Acrobat Pro and cannot use thumbnail images in some of my PDF files. I have not upgraded and have always the possibility to use with certain PDF files, but not all. Help, please!

  I am currently using Adobe Acrobat Pro and cannot use thumbnail images in some of my PDF files. I have not upgraded and have always the possibility to use with certain PDF files, but not all. Help, please!

  Version: Adobe Acrobat 9 Pro

  Windows

  I found the solution:

  In the PDF file, click View > Navigation panel > Pages

  I had to reset panels to view the Pages again.

  Thank you!

  Heather Solis | Operations associate | Crown AFAM Capital, Inc.

  [personal information deleted by Moderator]

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• [The content source < iehistory: a bunch of #s] are not accessible.

  Hello:

  I get a bunch of them in the observer of events as warnings.  Not sure if I have problems because of them or not.  Everything seems to work OK for me.

  Here is a list:

  #1:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #2:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #3:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #4:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: The object was not found. (HRESULT: 0 X 80041201) (0 x 80041201)

  #5:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #6:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  Some of the above are repeated 3-4 times. I noticed that the changes from 1000 to 500 in some of them.

  When you first start, these error messages appear.  Not sure whether or not they are part of the problem.

  #1

  The gatherer is unable to read the registry URL.

  Context: Application, catalog creates

  Details: (HRESULT: 0 x 0) (0x00000000)

  #2

  The search service has detected data files corrupted in the index {id = 431}. The service tries to automatically correct this problem by rebuilding the index.

  Details:

  The content index catalog is corrupted. (HRESULT: 0XC0041801) (0xc0041801)

  #3

  The Windows Search Service is stopped because there is a problem with the indexer: the catalog is corrupted.

  Details:

  The content index catalog is corrupted. (HRESULT: 0XC0041801) (0xc0041801)

  It was then rebuilt:

  Windows Windows (3524): the database engine has successfully completed recovery steps.

  Any ideas what to do?  Or is it quite 'normal' during boot?

  Thank you, Rick

  Hello

  Are you facing any problems when working with programs?

  Note:

  The event logs that you have posted here refer to errors with the search Index in your computer. These are not fatal errors. However, they certainly point to the fact that some of the sites indexed on your computer are not accessible for the mechanism of research due to various errors. These errors should disappear once you have performed the following steps.

  Method 1:

  You can run the fixit from following link and check the issue:

  Difficulty of Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search/

  Method 2:

  You can try to rebuild the index to see if it works:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  Let us know if it helps!

• What I do when I get this message: there is not enough space left to the location of the cache... Thumbnails and previews are not generated or updated in cache on the disk.  Please leave bridge and add more disk space on the volume of the cache or change

  I don't know what that means:

  "There is not enough disk space to left to the location of the cache...  Thumbnails and previews are not generated or updated in cache on the disk.  Please leave bridge and add more disk space on the volume of the cache or change the location of the cache in the Cache preferences.  Then restart Bridge. »

  I deleted a whole bunch of photoshoots I had on my desktop, but how to make more space here?

  Erica

  Hi Ericacole

  What version of the bridge are you using and what is your OS?

  Please how much is left in your main hard drive.

  By default, the bridge cache is located at: -.

  C:\Users\Yourname\AppData\Roaming\Adobe\Bridge CC\Cache (AppData is a hidden folder)

  Note that cache bridge could be very large depending on your use of the product.

  Please see Troubleshooting of errors, freezes | Adobe Bridge | Windows, Mac OS

  Concerning

  Assani

• Fortunately, I have download my Canon 7 d CR2 files using Photoshop elements 11; but when I do the same thing with a Canon G7X files are not recognized.  I downloaded the latest update of Adobe for RAW files.  Advice gratefully received.

  Fortunately, I have download my Canon 7 d CR2 files using Photoshop elements 11; but when I do the same thing with a Canon G7X files are not recognized.  I downloaded the latest update of Adobe for RAW files.  Advice gratefully received.

  You need Adobe raw camera 8.7 version. Unfortunately your software is earlier than the camera. ACR 8.7 is only compatible with PSE13. But it is possible to download and install the free DNG Converter to convert your raw files to the universal Raw format files and Adobe will be open in all versions of PSE (keep your originals as backups and for use in the software of the camera factory)

  Download Windows (.exe file) click here DNG Converter 8.7

  Download Mac (.dmg file) click here DNG Converter 8.7

  You can convert an entire folder of images raw with a single click. See this quick video tutorial:

  You Tube click here for the DNG Converter tutorial

• Satellite A500-1EE (PSAR9E) media buttons are not lit in Fendora

  I installed Fedora 16 on my Toshiba Satellite A500-1EE, part number PSAR9E, in replacement of Windows 7. Most of the stuff works very well, fortunately, except that the media buttons (play/pause, volume up/down, etc.) are not enlightened. It's frustrating because I often work in low light and simply can not see the button, which forces me to turn on the light every time I want to change the volume or move to the next song in my MP3 player.

  The highlight was done with Windows 7 (running after starting Windows, but was extinguished during the boot process), so he's certainly not broken.

  I tried with 16-32 & 64 bit Fedora and dreamlike Ubuntu 32 bit and I can't seem to find a way to turn on the light of media buttons, leading me to suspect is a Linux question nationally.

  Is there a setting, tool or any other solution that would allow me to have my media buttons light on?

  As you probably know for this lighting feature Toshiba designed little tool, this piece of software is designed for the Windows operating system only.
  I also know that Toshiba doesn't support Linux, so there is none of these tools which runs on the Linux platform.

  Have you tried to check some Linux forums and pick up the experiences of other experts in Linux.

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• Some keys on the keyboard for Satellite A500-025 are strange

  My Toshiba Satellite A500-025 has a keyboard with strange symbols on it. The back key on the right side of the keyboard is also a vertical rectangular key with 2 keys between the key containing the semicolon and the return key which is too far.

  On other Toshiba keyboards I've seen in stores, the return key is a horizontal rectangular key with that one key between the semicolon and the return key. Anyone know why I have this strange configuration on my keyboard?

  Thank you

  To be honest I don't know on which keys you mean exactly, but I think you should consult your dealer and ask what it can be.
  If you want to discuss about it here please make the photo of your keyboard and mark them with red circle, what do you mean exactly.

  I don't know what other Toshiba keyboards you mean but fact is that the Satellite A500 is Toshiba the first laptop with screen 16 delivered with larger keyboard, including the numeric keypad.

• Satellite A500 - what are the changes in the BIOS 1.90

  Hello

  I own a Satellite A500 PSAR3A-026002. He has BIOS version 1.50, the Toshiba site, it shows the latest version as 1.90. I would like to know what was changed from 1.50 to 1.90 but do not find the information anywhere. I was wondering if someone could tell me the changes or direct me to a site that has them.

  Not planning on upgrading BIOS at this point that everything works fine, just curious what they updated, corrected or added.

  Hello

  This information is not published on the European driver Toshiba page.
  But you can visit the Toshiba page we.
  I found some of the series Satellite A500 and details about the BIOS versions.
  But right now the BIOS 1.9 is not available on the US Just the v1.8 page.

  However, if your laptop works properly I wouldn't change anything.

• Satellite A500-02 s - not explore after log in

  Hey guys,.

  I have a Satellite A500-02 running on Windows 7 Home Premium.

  So I got a virus today and here is what happened:

  1. on the taskbar, I normally libraries pinned there, this icon became a white Notepad and when I clicked on it, he said he was no longer there and asked if I wanted to remove. I clicked Yes.

  2 many unsuccessful attempts to pin it back. When I right click the icon of libraries in the taskbar, the only option that appears is 'Close this window', whereas before it would have a jumplist and some options more that "this PIN to the taskbar"

  3. I looked on line to see if I could find a way to fix and found similar solutions where I had to make sure that IsShortcut.lnk was still in the registry, she was. So no use.

  4 restarted my computer and after typing my pw to connect, a blank white screen showed. I freaked out at first, but then google this on another computer and found that explore does not work automatically.

  5. the Task Manager open, tried to run explorer.exe, BUT HE wasn't THERE. (by that I mean C:/Windows/explorer.exe

  6. Nevertheless, I found another link "Explorer" in another folder to run and was able to begin to explore this way.

  7. Since then, I have used Norton 360 to make a complete analysis of the system, Malbyteware to another complete analysis of the system (which took some virus in the registry, etc.), but after a reboot, all I get is just a white screen.

  8 tried a system restore to a point in there a week and nothing. Still a white screen after connection and I still have to run explore via the Task Manager (and is either C:/Windows)

  9. Another symptom I have is that when I load this different version of Explorer (from a folder called winsxs) my volume adjust button, which was always there at the bottom right, does not appear. Also, when I go to the settings and try and make sure that it seems that explore hangs and I have to re - relaunch of the Task Manager.

  Any help would be greatly appreciated!

  I think you're at a time where you need to do a repair installation. There is here a guide [how to do a repair of trouble Windows 7 install | http://www.sevenforums.com/tutorials/3413-repair-install.html]