The 'Net View system error 6118' command prompt

Similar Questions

• Is it possible to run the restore of the system from a command prompt?

  Plug;

  Dell Studio 540 Quad core 3, 2 GHz (don't remember exactly?) processor

  Ram 8BG

  Windows Vista Edition Home Premium

  In general, everything was working fine until I ran the auto update for Vista. I don't know exactly which updates made it crash (that's the downside to update automatic, I guess?), but what happens is;

  PC powers up correctly, and everything seems to be in order up to and including the connection procedures. Once connected, the first error message pops up saying: "Windows Explorer" is not working properly and has restart. This will make a loop again and again, and as long as the error is running, I'm not able to perform all actions either. The only thing I am able to do, is to run the Task Manager, but if I try to run applications, programs or processes there, the Task Manager itself is in need of a reboot. So, basically, the only action I can perform the Task Manager is turn off the PC safely.

  Helps out;

  Ran memory diagnostics, no error found.

  I ran system restore, not detected no results. (....) According to me, if I could run Vista system restore as soon as Windows Explorer is stable, I can choose a restore point prior to the restoration defined point in chest upward and it will solve the problem.

  I ran the repair of the system, but the PC does not recognize a problem, according to the definition, the start sequence works as it should.

  I ran the security modes to see if I can access previous system restore points, but like windows explore does that no action can be taken. It's the safe mode; Base drivers and base with network connection drivers.

  I ran the command line safe mode, that works very well, but don't really know what I can do from there.

  I have the option to reinstall the OS, but I hope a response must be made of this? My thought is;

  Is it possible to run the restore of the system from a command prompt? And if so, where is the path, finally, what should I do?

  This starts the system restore
  %systemroot%\system32\rstrui.exe
   
  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
   
  --
  ..
  --
  "Arefare" wrote in message news: f6b7f70f-b8a0-4291-ae95-92a4d659f16a...
  > Care;
  >
  > Dell Studio 540 Quad core 3, 2 GHz (don't remember exactly?) processor
  >
  > Ram 8bg
  >
  > Windows Vista Edition Home Premium
  >
  >
  >
  > In general, everything was working fine until I ran the auto update
  > for Vista. I don't know exactly what updates does plant (it is
  (> the disadvantages of the automatic update, I guess?), but what happens is;
  >
  > PC powers up correctly, and everything seems to be in order until.
  > and including connection procedures. Once connected, the first error message
  > comes up saying "Windows Explorer" is not working correctly and to
  > restart. This will make a loop again and again and while the error message is
  > ongoing enforcement, I'm not able to perform all actions either. The only thing
  > I am able to do, is to run the Task Manager, but if I try to run a
  > applications, programs, or processes, the Task Manager itself needs
  > a reboot. So, basically, the only action I can perform the Task Manager is
  > turn off the PC safely.
  >
  >
  >
  > Helps out.
  >
  > I ran memory diagnostics, no error found.
  >
  > I ran system restore, not detected no results. (....) I think that if I could
  > run Vista system restore as soon as Windows Explorer is stable, I can
  > Choose a previous restore point as the restore point defined in boot up
  > and it will solve the problem.
  >
  > I ran the repair of the system, but the PC does not recognize a problem, as in
  > definition, the start sequence works as it should.
  >
  > I ran safe mode to check if I can access previous system
  > points of restoration, but as windows explore does not perform any action can be
  > catches. It's the safe mode; Base drivers and base with network drivers
  > connection.
  >
  > I ran the command prompt in safe mode, which works very well, but don't really know
  > what I can do from there.
  >
  >
  >
  > I have the option to reinstall the OS, but I hope a response is to
  > do this? My thought is;
  >
  > Is it possible to run the restore of the system from a command prompt? And if so, where
  > is the path to him, finally, what should I do?
  >
   
   

• Error in the Event Viewer system log

  Separated from this thread.

  Gerry,

  Thank you for your response.  It gives me a better understanding than the data stored on my computer that may be able to help me, and you have introduced me into a player.  I've posted the system log here and it includes hundreds of lines.  However I do not know how to make it visible to you.  I checked it to share and the only file that is serious is one that you brought me to download.  Although I have not found the answer to my problem, I found your advice gave me a better understanding about the tools that are available.  Maybe I'll get to understand how to use them.

  Ed Walsh

  Ed

  Please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on the event viewer:

  http://www.gerryscomputertips.co.UK/syserrors5.htm

• The event COM system error +.

  XP Home SP3. All the updates installed ect.

  Having this issue almost once a day.

  Computer stops responding. Icons have no effect or return errors. Parts of some windows, such as Solution Explorer, lose their color.

  Only solution is off and restart.

  Every time I am met with the same results in Event Viewer. A long line of warnings of yellow triangle with these properties:

  EventID 4356

  {The COM event system + could not create an instance of the Subscriber partition:{41E90F3E-56C1-4633-81C3-6E8BAC8BDD70}!new:{D3938AB0-5B9D-11D1-8DD2-00AA004ABD5E}.  CoGetObject returned HRESULT 80070422.

  Event ID 4352
  The event of COM + a system attempted to raise the EventObjectChange::ChangedSubscription event but received a bad return code.  HRESULT was 80040201.

  I ran a number of pieces of different viruses, including Kaspersky, clamwin, Spybot, Malwarebytes, Malwarebytes ROOT kit. Zone alarm.

  I have updated all drivers with SlimDrivers.

  Could really do with some decent advice on this one.

  http://EventID.NET/display-EventID-4356-source-EventSystem-eventno-1035-phase-1.htm

  Read more top

• lose the connection to the net after system restore

  I used the system restore and restart the pc after it but I lose the connection to net it gives zero transmission and recived it is a lock on the connection icon and when I try to use repair it gives the error message (windows could not finish repiring the problem because it is impossible to perform the folloing action not to conduct not query tcp/io of the canoe connection parameter)

  There is no problem with the connection that the net works with other PC not mine

  When first I used the net all the me I connect the Caron and its automatic execution

  so why it dosent run now the files make me lose the file how to fix

  When you did the system restore you have lost the connection to the network.

  Create a new connection

  Dale may

• system files and command prompt does not work

  For the last two weeks, I'm having a nightmare. I disabled system restore and when I turned it on again every thing had stoped working (microsoft word and works procedssor), the user account micxrosoft help and support).

  I tried using command prompt, but it does not work properly. When I typed in the shadow of the list he has the right to copy, my name and disturbing without clichés present in this system.  When I go to system restore I just get ablank screen white. If I go into system the control panel says that my C drive is followed.

  I don't know what else to do Windows XP came with the perchase of my little computer. I only am not computer savvy very please check all instructions fool proof. Please HELP, as all I want for Christmas is saystem restoration. Thank you very much

  Please provide additional information on your system:
  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
  It seems that your system has or has had a malware infection.

  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine...

  You should be able to get your system restore calendar works again quite easily, but who will not only relieve your system of malware.

  Don't forget to fix the problem and the difficulty not only the symptom of the problem.

  If you disabled the system restore and he turned his back, which removes all points existing restoration (this is how it is supposed to work).

  I run a few scans of such malicious software indicated below, then work on all the remaining issues.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.  System Restore is sometimes so afflicted, you need to reinstall the system restore (you don't have to reinstall XP - just reinstall the system restore).
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  Restart your system and resolve outstanding issues.
  If your system restore calendar is always to show just a blank white screen, do the following:
  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Re-record the dll is correct, even if they do not need re-registration.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time:

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Check your system restore calendar now.

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• Cannot run system utils in command prompt even if high in mode

  Hello

  Recently, I tried (and continued to try) to run chkdsk on a hard drive, to get the message "access denied because you don't have enough privileges." You have to invoke this utility running in elevated mode. "However, the command line is in high mode.

  The exact command was 'chkdsk E:/r.

  However, chkdsk runs on boot, OS, windows, master drive in the usual elevated command prompt. Run the command chkdsk command with its parameters from the command prompt was not a solution.

  What should I do to activate myself run chkdsk on another drive? UAC is disabled and I have combed through policy to activate my account administrator full. The OS is Windows 7 Ultimate 64-bit.

  In many ways, all leading to a prompt titled "Administrator: command prompt".

  The first is to simply open the command prompt. Being in the Administrators group and have disabled UAC makes high command prompt by default. The second was to do a right click and "Run as Administrator", and the third was to open the Run dialog box and enter 'cmd', who was then created with administrator privileges.

  However, the issue seems to have been resolved, and I am at a loss as to how or why. I don't know if it's something I've done or by chance, but at the same time I was interacting with the SYSTEM account to see if a guest has led to it would be able to run the chkdsk utility. It was, but then later I was also able to run the utility from the elevation prompt.

• Cannot get MS FixIt to run. I get "MatsBoot.exe - of the Net Framework initialization error"

  Error message cannot find a version of the runtime to run this application

  I had problems with other programs that require the .net Framework so now have just completed loading V2.0

  Also get error messages copy the file or folder frequently, sometimes without reason, he bed "can not read the source file or disk" it could be related / cause?

  Hello

  After the question in the link mentioned below for assistance.

  Microsoft Fix Center - NO support general questions Forum

  Hope this information helps.

• Receive the file (-1073741819) system error in Vista

  a min that my pc was discovered the nxt it doesn't let me go to all things, tried restote won't let me not can they continue to get windows errors come as c:/windows/system32/rstrui.exe, file system error (-1073741819), extended attributes are in uniform. help my i everything online

  * original title - I get the error system c:/windows/system32/rstrui.exe and the file and the extent of the attributes are in uniform and I cnt get in internet explorer or anything do windows, help *.

  Hi lauranelson77,

  How long have you been faced with this problem?

  It is sufficient to indicate the complete error message you receive.

  Method 1: Run the fixit available in the link below

  Difficulty of Windows system performance slow computer problems

  http://support.Microsoft.com/mats/slow_windows_performance/en-us

   

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Images of Smartphones blackBerry will not appear on the BB + file system error

  So, I have two problems:

  (1) I went in my 'images' on my Blackberry and there is no picture pictures says * no. *, but when I plugged my BB to my PC and clicked on the pictures folder, I can see all my photos. How is it?

  (2) I can't save a photo on my BB. When I choose 'Save', nothing happens, keeps saying "File system error", sometimes it is said that there is already a file with the same name and when I try to change and choose Save nothing happens.

  Another problem, I just discovered: when I take a picture, I can't delete it later, I get "picture cannot be deleted.

  * I don't have a MicroSD card in my BB.

  Hi and welcome to the Forums!

  Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Best!

• CPU has been disabled by the guest operating system error

  Running VMPlayer 3.1.3 version 324285 build on Windows 7 Enterprise 64 bit with 8G of memory.

  When I try to install some VMs based on Linux of ISOs, in a few seconds, I get the error:

  "The CPU has been disabled by the guest operating system. You must turn off or reset the virtual machine at this point. »

  (See also the screenshot attached)

  This happens on other ISOs based on Linux/Windows. I googled the web & VMTN, but have not found relevant

  answer my question.

  Thanks in advance

  Alex

  Hello

  What operating system is tryining install you?

  Take a minute to watch in VMware Compatibility Guide: search guest conductor /and try to upgrade to a version 3.1.4 If your system does not support the direct execution of 64-bit.

  Concerning

• Symbols of the event viewer and 'Error' or warning

  In the "Event Viewer" window, in the file of the application, there are events 1701. All of these events have a 'mistake' or the symbol 'warning' in the column type.  Is this serious? How did this happen and an average person can solve these erroors and these warnings? Kenny

  OK you return

• 2 VDR "impossible to create the snapshot for < system >, error-3960 (cannot suspend virtual machine).

  We test VDR on our ESXi 4.1.0 cluster 381591 and we have a few backups to a test Windows 2003 server and a Linux server and they backed up fine. We have a backup of a Windows 7 computer virtual test and we had a bunch of these errors...

  Failed to create the snapshot for systemname, error-3960 (can not suspend virtual machine)

  Which is strange because I can go in vSphere client and manually create a snapshot and remove without problem. Any ideas on why this is happening?

  Thank you

  You can try to set the 'disk. EnableUUID' to 'false '.

  Look here:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1031298

  Paul

• When you delete a document from the print queue of the printer it says error in command.

  Original title: printer comands

  There is only one document in that for my printer and I tried remove the document but I can't seem to go the State indicates that it is being deleted but it will not disappear under neath the pages in Quebec there is a bar that indicates the error in the command. How can I get rid of the document? It keeps me from being able to print something.

  Hi Karen,.

  What is the full error message that you receive?

  You can read the following article and check if it helps.

  Solve printer problems

  You can also read the following article.

  Printer in Windows problems

• HP PSC 1100 COMPATIBILITY WITH THE WINDOWS OPERATING SYSTEM ERROR 8

  Dear team,

  My HP PSC 1100 PImprimante is not printing documents with windows system 8. I installed the original drive and the PC it accepts. but do not print.

  I tried installation wrong shhot online but found no printer PSC 1100 with the installer of windows 8 or shootre.

  kindly help me.

  Hello

  Don't forget to unplug the USB and uninstall any incompatible software from your PC, the original CD is not designed for Windows 8, any operating system is listed on the CD.

  Once the software was remove, follow these steps to get the latest version of the driver through the Microsoft Windows Update servers:

  http://support.HP.com/us-en/document/c03460648

  You can also try following the instructions in the following tool and check if this is useful:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-122330-1&cc=us&DLC=en&LC=en&OS=4131&product=90787&sw_lang=

  Kind regards

  Shlomi