the network is not present or not started

My computer is windows xp sp3. I can access the \\partagereseau, but it shows an error message "\\10.0.0.6 is not accessible .you could not have permission to use this network resource".

Advertisement

Hello

 
1. have you made changes on the computer before this problem?
2. are you connected to a domain network?
 
 
I suggest you try these methods and check.
 
Method 1:
Keep the computer in a clean boot and check the status of the issue.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
 
Method 2:
Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows.

Tags: Windows

Similar Questions

  • Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

    Hello

    I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
    My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
    Thank you.

    I am able to fix this by myself.

    The solution that worked for me:
    Run as administrator command prompt.
    Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)

    At the command prompt, type in

    SFC/SCANNOW


  • My 3rd Windows 7 computer is unable to access the computers on the network. "Unable to browse the network", or "the network is not present or not started.

    3 computers, 2 XP, 3 windows 7.  The network is wired and wireless Ethernet.  Wired windows 7 computer can see xp wireless desktop.  no computer can see 3rd xp professional running on the wired computer.  Third computer can acess internet through router wireless, but when accessing NETWORK/MICROSOFT WINDOWS NETWORK PLACES/SET, a message comes back with "Unable to browse the network", "the network is not present or not started.  I can ping other computers.  I ran home and small office set up several times.  The network is protected by Norton Inernet Security.  He can see all computers in the group in its Panel of network security plan.  This system worked to a point.
    I'd appreciate any help you can provide.

    original title: unable to browse the network.

    All computers must be on a working group to see and access on the same network otherswise, you won't have access to each other.

    Pls check your computers under workinggroup (domain name)

    Check if your firewall is not blocking.

  • Error 1222: The network is not present or not started

    I have a home network with two computers. I've implemented such that file, internet and printer shares, a set-up that has worked well for a while. All of a sudden, I could not access the computer on which the printer is connected to everything. This computer, however, was still able to access the internet, but not able to access its own location on the computer network. I ran the Diagnostics of the network and the convenience of homegroup without result. I discovered that the Server service is not running and tried to start, but rather, I got the error "Windows could not start the Server service on Local computer. Error 1222: the network is not present or not started. "LAN diagnostics donnГ not answers. After the Server service does not, I cannot share files or printer, but can somehow get internet to share.

    Help, please. Thank you

    Hello

    Maybe this can help, http://support.microsoft.com/kb/170336

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • "the network is not present or started" after the execution of the configuration of the network. Why?

    I have a laptop that I used it on a network of small business with printers shared running a Microsoft network.   I was able to see the hard drives, printers, files and folders on the other machines for the past year, without problem.

    I recently installed Norton Internet Security Suite and since this operation were not able to connect to the local network< but="" i="" have="" full="" internet="" access. ="" i="" can="" see="" the="" router="" and="" surf="" the="">

    When I click on the already mapped network Drives (Y and Z on my computer) I get the following popup error:

    An error occurred while reconnecting Z: to \\servername\mydirectory

    Microsoft Windows Network: The network is not present or started.

    This connection has not been restored.

    So I tried to debug as follows.

    I called Norton.  They compeltely uninstalled after internet security and reinstalled using smart firewall.
    (It does not)
     
    I disabled Norton and tried to update the drive netowrk / reconnection
    (It does not)

    I disabled Norton and represented the Network Setup Wizard. Rebooted, tried to reconnect
    (Which did not).

    whenever I tried to connect, the error message.

    If the Windows network turned then how can I access the network?

    I don't see all the computers on the network.
    I can not connect to the printer, I was connected previously.
    The drive mappings, I set up back same Netowrk not started error when I click on them.
    There is no other computers on my network
    I have the same workgroup name (MSHOME) as other computers that CAN share resources.

    I use a Compaq Presario M2000 laptop
    Running Windows XP Home Edition (SP 3)
    trying to connect to a Waindows XP Home w / shared desktop printer.

    Thoughts, suggestions?

    Found the answer

    A friend who did the same thing.

    Notes: Microsoft Windows Network: the network is not present or not started


    "I started to see this message on a Windows XP SP2 computer, but not on the other in the same room. I couldn't understand why it was happening I was watching the Samba server to connect, and the machine was not connect at all. In addition, this specific message was not really on the Web.

    The answer is quite simple - run services.msc and enable the Workstation . I had turned off, rebooted and forgotten on this subject. »

    found the answer here:
    http://perljam.NET/notes/Microsoft-Windows-network-the-network-is-not-present-or-not-started/

    DOH

    My apologies.  I'm REALLY surprised that I couldn't find the answer on the forum to help here.  But now, it's here.  Hope this helps someone else who has the same problem and cannot find the solution.

  • The app on the market does not start, the page is white with some Blue Cross top left.

    The market does not start even on the internet.

    Hey Karin!

    I'm sorry you had to go through the frustration that you presented this nuisance. I am very pleased to hear that these steps solved your problem. =)

    Enjoy new applications you find on the market of Firefox. Here are a few suggestions that I find very useful, to help you get started:

    Have a wonderful day and please feel free to post new threads in the SUMO forums, if you have other questions about your Firefox OS device.

    Thank you

    -Ralph

  • When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

    Rick2425

    When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

    It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

    Hello Rick2425

    See the thread below and let me know if it helps thanks.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

  • Dell Inspiron Laptop with Vista installed at the factory does not start.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows

    Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.

    If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft.  We don't know what's on it or its operation.  We have no information to help us help you.  You need to deal with them.

    Sorry we can't be more helpful.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

    My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

    System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

    That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

    I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

    Help or direction is appreciated.

    original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

    See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

    So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Computer connects to the network, but not to the Internet, connect to the only local

    Hello world

    OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

    I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
    Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

    I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

    Is there a solution to this problem... or I'll just have to try everything that is out there?

    Thanks for your help!

    Hi MomPlaysBass,

    Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

    I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.

  • ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

    Title: Cannot get an Internet connection!

    Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

    Hello

    -Did you do changes on the computer before this problem?
     
    Method 1: I suggest you follow the steps to run the troubleshooter from the
    link and check if the problem persists.
    Using the troubleshooter from network in Windows 7
     
    Method 2: I also suggest you to follow the steps from the link and check if it helps.
    Windows wireless and wired network connection problems
     
    Method 3: Follow the steps below to remove and add the wireless network.
    (a) click Start and select Panel.
    (b) select network and sharing Center and manage the networks without wire (on the left).
    (c) in the list, click on your network and Remove top.
    (d) you can then search for available wireless networks again and reconnect it to your network.
     
    Hope this information helps.
  • ICS error - "the service of the redundancy or the grope does not start.

    These days I was facing this problem on ICS. Whenever I try to share my internet connection with wifi, it gives an error saying: "the service of the redundancy or the grope does not start" I have reset the connection, disable on surroundings & & restart the system as well, but not the changes even error every time. Is there someone can help on this desire to please much appreciated.

    Hi kaliszewski,.

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, it looks that you are facing with Internet connection sharing problems.

    Please follow the steps mentioned below that can help us to solve the cause of the problem.

    Method 1:

    Maybe not all services that run the Internet (ICS) ICS are enabled. I suggest to start over and make sure that the underside of addiction services are activated.

    1. click on Start, run, type services.msc and click OK.

    2. to activate a service, find in the right pane and double click on its entry.

    3. make sure that the Startup Type is set to Automatic , and then click OK.

     

    All the following services must be so configured to use ICS:

    Application Layer Gateway Service
    Network connections
    Knowledge of the network (NLA) locations
    Plug-And-Play
    Remote Access Auto Connection Manager
    Remote Access Connection Manager
    Remote procedure call (RPC)
    Telephony

    After checking and automatic startup for each of these services configuration, close the Services window and restart the computer before trying again to enable ICS.

    Method 2:

    To disable and then re-enable the Internet connection sharing on the Internet connection of the Windows 7 computer. If it asks you to select a private network connection, select the one that connects to the hub. Check the connections to the LAN on each computer:

    1. Press Windows Key + R.
    2. Type ncpa.cpl in the box and press enter.
    3. Right click on the connection to the local network, and then click status.
    4. Click on Details. It should show these values:
    • IPv4 address: 192.168. *. *
    • IPv4 subnet mask: 255.255. *. *

    If the values are not good, Internet connection sharing is not configured correctly.

    You can also consult the following link for troubleshooting Internet connection sharing problems:

    http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

    Hope the above caliper problems

    If you need further clarification or additional assistance, please let us know, we will contact you as soon as possible.

    Thank you.

  • Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

    To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

    I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

  • The browser does not start after you have turned off and turned on the computer

    The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

    • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

    Thank you

  • I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

    I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

    1. did you remove Bootcamp using disk utility?

    2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

  • My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

    My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

    When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

Maybe you are looking for