"the network is not present or started" after the execution of the configuration of the network. Why?

Similar Questions

• Error - the file awduu36e.sys is not found. Press a key to continue, not able to start after having done the repair of the system on the XP machine.

  Original title: the awduu36e.sys file is not found.

  After a repair of windows XP SP3, I receive, at startup, the message "the file awduu36e.sys is not found. Press a key to continue"- I can't press a key because the keyboard is not recognized or active at this point in the trunk, although I can access the BIOS earlier in the cycle. I tried to boot from the CD from Microsoft but get the same problem. -Any ideas please?

  "cadastra" wrote in message News: 80941b1a-7 c 69-4f05-a259-560357b7f291...

  Hi Kim,

  First of all thanks for respone and sorry for the delay to return but am in Australia so bit of a lag in time!

  OK the sequence goes as follows:

  1 gigabyte MB BIOS screen - at this stage sensitive keyboard and I can access BIOS OK.

  2. new screen - PCI resources; Checking DMI Pool etc. ;

  3. new screen - "Please choose which startup option:

  -Windows XP Home Edition

  -Installation of Windows XP.

  and countdown etc. - from this point in the sequence of the keyboard does not respond so cannot select the OS and inadmissible F8, then highlighted option default selected that is configured.

  4. new screen - "check you computer hardware configuration...".

  5. new screen - "the file awduu36e.sys is not found. Press a key to continue. "

  As the keyboard is unresponsive after the BIOS screen I have no way of influencing the order above.

  Other relevant points:

  -When you make commissioning/repair day I received the message to halfway through - "awduu36e.sys file is not found" and the option start over or ignore; after another attempt to a couple of times I chose skip so I guess that I got myself into this mess. What is awduu36e.sys anyway?

  -My copy of Windows XP Home Edition SP3 OEM is and has been installed when I got to the machine, so I think that some repair options are not available for me in any case.

  Again thank you very much for the reply and any help you can provide,

  Kind regards

  Fraser

  Looks like you are leaving it too late to use F8 (must be before the OS options appear)- and you have a partial installation of some versions of Windows in progress seeking the file on a CD.
  
   
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Not possible to start after recovery

  Hello

  Yesterday my Toshiba Satellite L555-110 is not stopped correctly. It looked like endless loop, while Win 7 (64 bit) showed "logout". I turned the laptop off (5 sec power button). After that, Windows is not started anymore. There was a black with a message screen as 'Please make sure that all devices such as hard disks, CD-Rom drives, etc. are well connected and try again.
  I thought that I hit the file system and started a live Knoppix CD. I tried to fix the file system with ntfsfix on each partition. This does not solve the problem, so I tried to fix Win7 with the Original Win7 from my other computer disk. In the installation menu repair tools is not started, so I had to stop the computer again.

  I thought that the problem could be the MBR after that. I searched the web and found a "command of Knoppix'"sudo testdisk"with the option"write MBR ". After trying this, the error message has changed, that the computer does not recognize the bootloader more. Here, I decided to use the recovery DVD that I created after purchasing the laptop.

  Once the recovery is finished, I tried to boot Win7, but there was a new error message (on a black screen) who told me that there are files broken in C:\Windows\system32\drivers.
  As my girlfriend has the same model of laptop computer than me, I decided to copy the folder "drivers" of his laptop (after the renaming the originial files), start knoppix, and copy it to my laptop. While trying to boot Windows with the 'safe mode' option there is no error message more appear, but now I have a hangup.
  After that I tried to install Win7 with the original disc in my other computer, but when you try to install, there is a message 'C:\$Secure' kind of broke down. Try the chkdsk command. Repair tools has not responded (infinite loop) after a few minutes of trying to find the Windows installations

  Can someone help me? I have no idea what to do at this point

  If you have two absolutely identical laptops equipped with identical hardware put HARD drive laptop s girlfriend in your laptop and try to start Windows.
  Please post the result.

• eBay Turbo Lister was not able to start because its side-by-side configuration is incorrect

  I downloaded the eBay turbo Lister sale program... trying to open it, I get the following error message... "The application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. "technical support eBay said it happens from time to time and it's a windows problem

  Hi Arglen,

  The machine is missing the correct C++ runtime components for your system type. (x 86 or x 64).

  You try to install the latest Microsoft Visual C++ Redistributable package and check the issue. First of all, you can see this.

  For 32 bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 86)

  For 64-bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 64)

• Acer Aspire One will be not run Office Starter after having uninstalled windows 10

  I made a huge mistake and clicked on the link to get Windows 10.  After you have installed Windows 10, I realized that the Office Starter Edition on my Acer Aspire One is not compatible.  I started Windows 7 but now Office Starter will not work.  I try to fix but get a message that says I don't have an internet connection.  Yes!

  Hello

  I advise you to put your PC with [Alt] + [F10] and perform the updates. Using "Back to Windows 7", you lose a lot of applications and have a few problems.

• DESKTOP HP 700-527C SERIES WILL NOT START AFTER A REBOOT WITH MY SEAGATE BACKUP MORE 4TO CONNECTED TO USB 3.0 OR 2.0

  WHEN I CONNECT MY EXTERNAL HARD DRIVE BACKUP 4 TB OF SEAGATE MORE SACT4000600, HE NOT ONLY RE-START THE COMPUTER. IT SEEMS TO BE

  TRY TO RESTART ON THE SEAGATE, NOT THE INTERNAL HARD DRIVE. MY COMPUTER IS A HP-700-527 C, RUNS THE WINDOWS 7, THE INTERNET EXPLORER BROWSER. MY ERROR MESSAGE SAYS "NO BOOT DISK OR DISK IS DAMAGED." I JUST INSTALLED CMS BOUNCEBACK ULTIMATE, WEBROOT AND MICROSOFT OFFICE PRO AND VISIO.

  I FIRST SET UP THE FIRST COMPUTER AND RECEIVED THIS MSG ON RESTART AFTER THE DISKS HAVE BEEN INSTALLED FOR BOUNCEBACK AND SEAGATE. THOUGHT IT WAS A PROBLEM OF HP, NO LUCK WITH THEIR HELP. MICROSOFT IS NO HELP. A COMPUTER HELD THE GEEKSQUAD AFTER THEY WENT THROUGH IT REMOTELY AT HOME, THEY COULD NOT MAKE CHANGES TO THE BIOS REMOTELY. BIOS IS BELIEVED TO BE IN THE WRONG ORDER TO RE-BOOT. THEY COULDN'T GET IT TO STOP TRYING TO RESTART ON THE SEAGATE, EVEN WHEN THE BIOS FOR THE REST HAS BEEN DISABLED.

  ONLY THING ON IN THE BIOS WAS THE C: / DRIVE. BUT, WITH IT UNPLUGGED IT WOULD RESTART WITH THE BIOS ALWAYS POWER OFF TO EVERYTHING ELSE? WE PLUGGED ON THE 3.0 AND VERSION 2.0. SO, I TOOK THE COMPUTER BACK THINKING IT WAS HER, EVEN A NOVELTY. AT EXTERNAL BACK SAME THING. SAME THING ON THE NEW COMPUTER AND THE NEW HARD DRIVE! .... SEEMS TO ME A HARDWARE PROBLEM? BETWEEN SEAGATE USB 2.0 AND USB 3.0 PORTS?

  IF THE BIOS EVERYTHING IS OFF, THEN WHY HE WOULD ATTEMPT TO BOOT UP OUT OF SOMETHING THAT DOES NOT EXIST IN THE BIOS IT IS! ... MEETS EVERYONE. I HAVE A SMALL PORTABLE 1 TB SEAGATE, IT WORKS PERFECTLY IN USB 2.0 NOT IN 3.0, COOL, MY DIGITAL WEST ON USB 2.0 BUT NOT USB 3.0 ŒUVRES. MY COMPUTER WON'T BOOT UP OFF OF THEM. SITTING AT THE DRAWING BOARD! ??? !!! ....

  Hello
  Thanks for posting your query on the Microsoft Community.

  As you mentioned that your HP desktop computer is not able to start after a reboot.

  I would first disconnect the backup / external drive and check if you are able to start or not.

  I suggest to go to the BIOS and boot sequence and select the internal hard drive as first boot device.

  NOTE: BIOS change / complementary Metal Oxide Semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Setting changes are made at your own risk.

  If the problem persists. I suggest that get you in touch with HP support in order to solve this problem.

  See the link below.
  http://support.HP.com/us-en

  Please let us know if you face the future with other problems with windows. We will be happy to help you further.

• Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

  Hello

  I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
  My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
  Thank you.

  I am able to fix this by myself.

  The solution that worked for me:
  Run as administrator command prompt.
  Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)
  
  At the command prompt, type in
  
  
  SFC/SCANNOW
  
  
  
  

• Error 1222: The network is not present or not started

  I have a home network with two computers. I've implemented such that file, internet and printer shares, a set-up that has worked well for a while. All of a sudden, I could not access the computer on which the printer is connected to everything. This computer, however, was still able to access the internet, but not able to access its own location on the computer network. I ran the Diagnostics of the network and the convenience of homegroup without result. I discovered that the Server service is not running and tried to start, but rather, I got the error "Windows could not start the Server service on Local computer. Error 1222: the network is not present or not started. "LAN diagnostics donnГ not answers. After the Server service does not, I cannot share files or printer, but can somehow get internet to share.

  Help, please. Thank you

  Hello

  Maybe this can help, http://support.microsoft.com/kb/170336

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• My 3rd Windows 7 computer is unable to access the computers on the network. "Unable to browse the network", or "the network is not present or not started.

  3 computers, 2 XP, 3 windows 7.  The network is wired and wireless Ethernet.  Wired windows 7 computer can see xp wireless desktop.  no computer can see 3rd xp professional running on the wired computer.  Third computer can acess internet through router wireless, but when accessing NETWORK/MICROSOFT WINDOWS NETWORK PLACES/SET, a message comes back with "Unable to browse the network", "the network is not present or not started.  I can ping other computers.  I ran home and small office set up several times.  The network is protected by Norton Inernet Security.  He can see all computers in the group in its Panel of network security plan.  This system worked to a point.
  I'd appreciate any help you can provide.

  original title: unable to browse the network.

  All computers must be on a working group to see and access on the same network otherswise, you won't have access to each other.

  Pls check your computers under workinggroup (domain name)

  Check if your firewall is not blocking.

• Virtual WiFi not presentation, it disappears from the network and sharing Center.

  Original title: Virtual WiFi not presentation

  Hello

  I created Virtual Wi Fi cmd (netsh wlan), first it was created and posted his icon in the network and sharing Center, after that show how I disabled it from the network and sharing Center by clicking on the icon and pressing the button disable I pressed off it disappear from the network and sharing Center.

  Can someone help how to activate it so that I see her back icon in network and sharing Center.

  Thank you

  Hello

  You have virtual map of Wi - Fi enabled in Device Manager?

  This problem may occur if network settings are changed.

  You try to run the following command check if it helps.

  a. press on the key Windows + X.

  b. click on (Admin) command prompt.

  c. type the command netsh wlan start hostednetwork and press on Enter.

  If the problem persists, I recommend posting your query in the TechNet Forums to get help:

  8.1 Windows networking forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows Vista will not start after the automatic installation of the patch Ms.

  My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Network card in Windows 7 does not start after PC mode 'sleep'

  I'm having a problem with multiple PCs in a field by which after that the PC goes into sleep mode network connectivity is lost or degraded. PC users past in mode 'sleep' and they won't be able to connect, or if they can open a session they will not have access to network drives. Restart or NIC deactivation and reactivation of will solve the problem. Also note that he seems to have started after the installation of update for Windows Defender (definition 1.211.1747) definition.

  Hello

  Thanks for posting your query on the Microsoft Community.

  You mentioned that you are connected to a domain network, I suggest you post your query on the TechNet forums as we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Does not start after the upgrade to 1.5.

  Does not start after the upgrade to 1.5.  "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »

  All ideas

  No problems in the past with edge since September 2012.

  =============

  Laptop HP Pavilion dv7-2185dx

  Dv7-2185dx product name

  #ABA product number NV023UA

  Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology

  The microprocessor Cache L2 6 MB Cache memory

  6144 MB of memory

  Memory Max 8192MB

  Graphic ATI Mobility Radeon HD 4650 (M96)

  Video memory up to 2815 MB (1024 MB dedicated)

  500 GB (5400 RPM) hard drive

  Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer

  17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)

  Fax/Modem high speed 56 k modem

  Network integrated 10/100/1000 Gigabit Ethernet LAN adapter

  Wireless Connectivity Intel WiFi Link 5100AGN

  The Altec Lansing SRS Premium Sound technology with subwoofer

  101 keyboard compatible with the keyboard keys full size numeric keypad with integrated

  Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad

  PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)

  External ports

  5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card

  4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA

  2 headphone

  1 microphone input

  HDMI

  1 VGA (15-pin)

  eSATA + USB 2.0

  1 RJ-11 (modem)

  1 RJ - 45 (LAN)

  expansion port for computer 1 cell 3

  1 IEEE 1394

  irewire (4 pin)

  1 consumer IR (remote receiver)

  Other devices HP Webcam with integrated digital microphone

  Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)

  Weight lbs 7,74

  Housing for Kensington MicroSaver Security lock

  Turn on the password

  Accepts 3rd party locking safety devices

  Software

  Operating system:

  Genuine Windows Vista Home Premium 64-bit with Service Pack 1

  
  

  Hi, people.

  I was able to reproduce the problem here, so the good news is that you're not imagining things.  We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top.  This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform.  We will do the best we can and we will keep you guys, update as to what status is.

  Thank you

  -Elaine

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you