the new interface of YT and comments

Similar Questions

• On the new Interfaces to terminate VPN

  Hello

  I have 2 Cisco ASA connected in 2 offices who have a fully functional l2l ipsec tunnel.  A new link layer 2 has been installed on each site and I'm her leading to a firewall FE int each site with a private address.  Connenctivity is established.  So I want to exchange the vpn to use external interfaces to the new installation interfaces

  On the two firewalls, I activated isakmp on the new interface

  I created a new group of tunnel on each side with the same pre action key (with the system configuration command: run more :-)))

  activated the card encryption 'my_map' on the new interfaces

  That's all I would need?

  I tested it by removing existing and using new peers peers and its not coming up and saying there is no match

  Something else I'm missing?

  Thank you

  Hello

  In addition to activate the cryptographic controls on the new interfaces, you should have the route highlighting the new interface to reach the VPN peer.

  Verify that you have connectivity to the VPN peer through new interfaces.

  Federico.

• Error in the new interface consultation documents

  Hello

  I created a new type of document and I use script idoc for certain metadata are

  autofilled and can perform the download of the documents of the new interface, but when I see the documents

  I have an error: System error has occurred. Contact your site administrator.

  This problem occurs only in the new interface in the native interface can access the documents.

  Someone knows how to help?

  Thank you

  Hello

  Thank you all, I am now managing read documents

  After you change a type of metadata that were incorrect.

  Thank you

• After you disable the new interface to tabs, all new documents are not open in a larger window

  Hello

  Yesterday I upgrade my Adobe 11.0.10 Adobe Acrobat Reader DC 15.010.20056 player. The tabs interface was pleasant enough, but there are still some limitations with this features, such as,.

  1 > no option to set no maximum. tabs in a single window,

  2 > tabs cannot organize, to be moved to a new window and several selected

  I want to disable the new interface to tabs via Preferences > General > open documents in the new tab in the same window (not checked), but after you turn off the new tabbed interface, all new documents open after the first document are not open in a maximized window, they always opened in a restored window.

  No matter what I do, it keeps - on the opening of the second new pdf in this one, restored windows are the things that I tried to overcome this.

  1 > right of the DC open Adobe Acrobat click in the task bar > Adobe Reader DC > right click > properties > run: enlarged - only the first document opened in maximized windows, documents later opened in the restored only, window that too seem to not work when I closed the last document in a restored window. Opening in the same window type is part of the windows operating system, it does all the time, "opens the entire application in the same way that they have been closed, either maximized/restored and the size of Windows too". Only the first one application window is open in this way, rest of the windows open is seems to be not supported by the operating system.

  2 > of this forum discussion https://forums.adobe.com/thread/435552?start=0 & tstart = 0 , I checked for the mentioned, registry keys

  HKEY_CURRENT_USER\SOFTWARE\Adobe\Acrobat Reader\DC\SDI

  the default value is - "bNullDocMaximized" = DWORD: 00000001 , "bMaximizeNextDocument" = DWORD: 00000001 and "bResizeOnOpen" = DWORD: 00000000

  Exchange only tried on the third button (the rest has been preset to required values) - "bResizeOnOpen" = dword: 00000001 - restart > no change > reset to its default value

  What to do now...?

  Thanks in advance

  Hi Gangatharran,

  Thank you for bringing this to our notice.

  We have recorded a bug for this and will share an update on the progress made in this thread.

  Kind regards
  Rave

• I just upgraded the new 6.01 FF and now I want to restore my previous version upgrade. How do I do that?

  I just upgraded the new 6.01 FF and I don't like the way it is prepared and want to return to the previous version. How I do that without completely uninstall FF completely? Help... Please tell me how > thank you

  Well, it's not as if you're upgrading! You don't downgrade your browser.

  But don't worry, the decommissioning process, it's like the upgrade. For example, you can install an older version without uninstalling Firefox!

  Don't forget to hit "resolved."

  IMPORTANT NOTE: Remember that previous versions may have security problems. The latest security updates, you MUST upgrade to the latest version. That's what I would recommend. Thank you!

• My mcbook used to synchronize my iphone6 it again to get the new version on computer and I have the new version of iTunes versionThis (11.4) is the current version.

  My mcbook used to synchronize my iphone6 it again to get the new version on computer and I have the new version of iTunes versionThis (11.4) is the current version.

  iTunes version 12.3.2 is the latest version of iTunes.

  http://www.Apple.com/iTunes/download/

• What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image

  What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image

  Your question it will be better answered in forum Windows 7 installation and deployment on TechNet:

  Windows 7 installation, Setup, and Deployment Forum

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• I have CS6 on old computer and that you have disabled it. I now want to install the new computer. Downloaded and Set UP wrote the serial number is valid but does not CS 6 show as a product available. ???

  I have CS6 on old computer and that you have disabled it. I now want to install the new computer. Downloaded and Set UP wrote the serial number is valid but does not CS 6 show as a product available. ???

  Please have the link below to download correct application download Creative Suite 6.

  Please answer in a private message serial number that you use to activate it.

• Project Manager fails to cut after the new method to "consolidate and transcode.

  Greetings,

  I use first to create trailers and other equipment for a game studio. For the record, I use dxtory ( http://exkode.com/dxtory-features-en.html ), with the first/AE allows you to change the images and SOUL for rendering. A project may consist of several hundreds of GB's worth of the source footage. When made with a given project, historically I used method 'trim' first since the project manager to store copies ready images - as it is intended. This can turn a project with 400 GB of source down to a cup which is only 80 GB or more. This has worked well in the past, but because of the recent change to the new feature to "Consolidate and transcode", this operation will fail when the current creation.

  I created a full repro this for anyone who would like to try.

  The repro project: https://dl.dropboxusercontent.com/u/263501/misc/PremiereRepro/Copied_transcode_repro.7z

  I'm using Project Manager, select the following options:

  https://DL.dropboxusercontent.com/u/263501/Misc/PremiereRepro/pp_transcode_2.PNG

  This should lead to a MB avi ~9.9, which is 15 images of the larger video, the panoramic nature views slightly to the right.

  Instead, I get the following message after the end:

  https://DL.dropboxusercontent.com/u/263501/Misc/PremiereRepro/pp_transcode_1.PNG

  Looking at the directory for this new project "successful", the size of the file is the same as the source of the layer and without cropping footage actually occurred.

  The journal of the events, said the same thing:

  https://DL.dropboxusercontent.com/u/263501/Misc/PremiereRepro/pp_transcode_3.PNG

  This method worked 100% reliable before the new feature to "consolidate and transcode. It seems to be quite broken in the current one, at least for my purposes. I forgot something, or is this a bug? I am currently having to install an earlier version of first trying to work around this problem, but this obviously isn't the solution.

  You receive this warning as the selected Format (DNxHD MXF OP1a) does not support your combination of the size of the image, frame the combination of rate and on the ground. For example, DNxHD will support sizes 1280 x 720 or 1920 x 1080, while your source file is 1280 x 800.

  Try using a combination of Format/Preset that will support your settings of the source file. For example: Source of game (Mac) ProRes or CineForm Match (Mac and Windows).

  I hope this helps.

• The new interface of BC - lack of user management

  Hello

  The new interface seems to miss the item of menu "manage users." It was under admin menu drop-down in the old interface.

  Hey there,

  Users are the roles of users - Site Settings - Admin & users.

• The BDV-E580 Netflix app will be always updated to include support for the profile and the new interface of Netflix?

  I had my BDV-E580 for about I would say 2 years now, I don't plan on obtaining a new player Blu - Ray any time soon, because the surround speakers work fine with it, but I'm a little sad that I didn't get the support profile or the most recent software updates with Netflix interface , I recently noticed the icon has changed to the new red on white logo of Netflix, but it would be great if you (Sony) could support at least update the Netflix app for my and other devices.

  You can share your application at the 'join the Inspiration"community of Sony. Comments or suggestions that you would like to post there would be much appreciated.

• Yesterday, I allowed Firefox download the new program... and now I can't find the Firefox toolbar to sit upstairs on the left. Where is he?

  April 29, 2014, Mozilla has offered a new update and let it install. Now, the bar tools Firefox or whatever orange line allows me to look for sites of course is not there. Where is he?

  29 of Firefox and later versions have the interface Australis which seems different from the UI in Firefox 28 and older versions.
  With interface Australis, the orange Firefox menu button has been replaced by the three Menu button at the right end of the Navigation bar on the bar.

  See also:

  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox
  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/what-happened-to-the-add-on-bar

• Terrible problems of conversion of the site to meet the new version of Muse (and other important observations)

  Dear all

  I was very pleased with the new version of sensitive Muse.

  I had downloaded the pre-release version and tested it and presented my comments as a good obedient of Muse Web site designer, after all, we must all contribute to get the best system that actually works.

  Is the day of release and I've updated Muse via my desktop CC application.

  I watched videos Adobe make reference to liberation, that everything online and even read through the excellent series of video training sensitive to themes of Muse.

  Only some of my clients gave me their business with the understanding that I would like to convert their sites Adaptive desktop, Tablet and phone versions to fully responsive as soon as the new version is out.

  A customer has a big launch very soon which also requires the contents of the site changes so I decided to tackle this site first.

  I made a copy of the site and opened it and it converted or whatever Muse only when you open an existing site in the new face.

  I changed all the settings, site, properties etc etc in the offline version of the page.

  Then, I have worked to make the Master suited page.

  It is then that my nightmare began.

  Nothing seemed to work as described and the biggest problem was the clamp that was so slow, late, dried, etc., it was almost unusable.

  In any case, after 18 hours, the page master has been made and when you preview in the development tools Google Chrome seemed reasonable enough.

  Why 18 hours you might ask, well partly because of the clamp problem mentioned previously, but the entire system is extremely inefficient in the way it works with so many questions to consider whether to apply or not apply to each object and a constant in Google Chrome preview as you could not trust what has been is displayed on the screen of Muse.

  Next challenge was to convert the content of the home page. It wasn't a page complex and only consists of 6 pieces - pictures, text and a button on the State.

  I have applied all the settings and slide the clamp to slightly reduce the width of the browser, that when I had to move showed major problems on the page immediately:

  • Huge empty spaces appeared
  • The objects did not adapted as it should and that I had seen in so many videos - so, for example, if a block of text was next to an image they immediately went massively out of alignment when you drag the clip
  • The finished status button on the margins of the page
  • Etc etc.

  In any case, after 6 hours of tearing my hair that I give up and contacted Adobe.

  They began a session remotely and said I had everything set correctly and that Muse wasn't as the developers had planned.

  Finally, they said by e-mail on the .muse file, which I did, and of course I'm sitting here with a looming deadline and still no answer on how to solve the problems, which no doubt all my other existing sites will not have when I come to convert.

  Other problems discovered during my tests to date are:

  • Right click for very slow service
  • Slow to open library (more despite being told you can download several items from the library when you try to load too, a lot (by Muse) everything freezes Muse and you force a fence via the Task Manager)
  • Adjusting the position of the breakpoint by right clicking on the breakpoint window very slow, late development and jerks (IE just like the clip)

  In addition, I was absolutely horrified to see that there were other issues, especially since many objects react at all:

  • Image do not respond in the envelope
  • Compositions of
  • Slideshows
  • Forms
  • Google maps has only reactive width no height as well
  • Google Map inserted via insert HTML while I updated sensitive width, there is not (I guess the code must be added to make all insert sensitive html and some guidance on what could be this code would be useful Adobe, including a video on the subject feature Muse is so limited you must add a large number of html).
  • YouTube has only reactive width no height so completely useless
  • No effect of scrolling on Muse reactive
  • In addition, virtually all 3rd party widgets Muse themes et al. do not work with response as they say they are waiting for Adobe to undertake the necessary work on base first. So any site that uses widgets cannot be converted (and almost all do so because of the lack of functionality of Muse)

  This Muse is not really sensitive and it is useless to creation or conversion of sites until it is.

  Also, I was extremely disappointed to see that despite me and a lot of other designers asking some features via the Forums Muse he had not been included. This includes, but is not limited to:

  • Draw ellipses (& circles) and polygons that you can in InDesign in forms or frames of image
  • Site search function
  • Images do not clearly appear in the Muse until preview
  • No password protection function
  • Form always using reCAPTCHA 1 not 2
  • No installation on the forms file upload
  • Slideshow of legends still not discoloration with images
  • No idea if all the SEO issues as I cannot finish a site and scan

  What a disappointment is complete.

  So, for me, sorry Adobe not usable as a form builder free site responsive until much more work has been done, hopefully very soon.

  Kind regards

  Mike

  I just spent two weeks, putting in place a sensitive muse site. I am gray, tired and frustrated. I was so excited to make this project work.

  I wish I had read these articles earlier.

• Recorded not reflecting is not in the new Interface Options of LKM

  I modified my LKM option to truncate my target table. When I create a new interface, the LKM is selected automatically, but the options selected are not what I had saved. How can I 'really' change my option so that whenever I create a new interface, I didn't pass the option truncate table a NO to a YES?
  
  Thank you
  Dinesh.

  Hi Dinesh,

  Just to confirm...

  If you have changed the default value in the tab 'options' window KM; This is not going to work.

  You must change this to IKM. Please go to your project---> knowledge Modules---> expand IKM SQL Append (by clicking on the icon "+")---> Double click on the option TRUNCATE it and set its value to YES.

  Thank you
  Fati